Categories
Start selling

Account

Log In
Create an account

Account

Log In
Create an account
Karl Suss RA120M P240314060
Karl Suss RA120M P240314060
Karl Suss RA120M P240314060
Karl Suss RA120M P240314060

Karl Suss RA120M Automatic Scriber Verified seller

Price on request

Make an offer
Manufacturer Karl Suss
Model RA120M
Year
Location USA US
Category Semiconductor - Wafer equipment
Product id P240314060
Language
bg Автоматичен писец Karl Suss RA120M
cs Automatický písař Karl Suss RA120M
da Karl Suss RA120M Automatisk skriveredskab
de Karl Suss RA120M Automatischer Anreißer
el Karl Suss RA120M Αυτόματη γραφομηχανή
en Karl Suss RA120M Automatic Scriber
es Karl Suss RA120M Trazador automático
fr Karl Suss RA120M Pointeur automatique
hr Automatski pisač Karl Suss RA120M
hu Karl Suss RA120M automata írógép
it Karl Suss RA120M Scriba automatico
lt Karl Suss RA120M automatinis raižytuvas
nl Karl Suss RA120M Automatische Krabber
pl Rysik automatyczny Karl Suss RA120M
pt Escrivão automático Karl Suss RA120M
ro Karl Suss RA120M Scriber automat
ru Автоматический писчий станок Karl Suss RA120M
sr Karl Suss RA120M Automatski Scriber
sv Karl Suss RA120M Automatisk skrivare
tr Karl Suss RA120M Otomatik Scriber

Specifications

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

Description

The RA 120M permits scribing of wafers up to 4 inches (102 mm) in diameter and substrates as large as 4 inches (102 mm) square.

Two independent scribing axes are separately programmable for maximum versatility.

Parameters can be entered in either microns or mils. (Inch or metric mode is selected before power up by positioning an internal mode jumper.)

Data input increments are 1 micron in the metric mode, and 0.1 mil in inches.

The RA 120M provides three distinct scribing modes and two separate scribing axes so that you can optimize the specific configuration best suited to your need. The choice depends upon the compound being scribed and the particular device type that is fabricated on the wafer or substrate.

If the continuous scribe program is selected, the scriber will produce an uninterrupted scribe across the entire length of the material, to the depth programmed during setup. The edge scribe mode allows the RA 120M to scribe a small distance in from the edge of the material.

The scribe length is operator selectable in 1 micron increments between 20 and 10,000 microns, and the beginning of the scribe is always relative to the edge of the material. When an edge scribe is finished, the table indexes automatically and the next scribe starts immediately. Therefore this scribe mode is very fast, since the table only moves a small distance in the scribing direction.

Skip scribing is very useful for situations where an intersection of scribes would interfere with proper operation of the device. In the skip scribe mode, the tool is placed in the scribe position while the table moves a specific scribe length distance; the tool is then raised and the table moves a given distance before the next scribe commences. Parameters are user selectable, and skip scribes between 20 and 10,000 microns may be programmed.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2019
Offers online 73
Last activity Nov. 21, 2024

Description

The RA 120M permits scribing of wafers up to 4 inches (102 mm) in diameter and substrates as large as 4 inches (102 mm) square.

Two independent scribing axes are separately programmable for maximum versatility.

Parameters can be entered in either microns or mils. (Inch or metric mode is selected before power up by positioning an internal mode jumper.)

Data input increments are 1 micron in the metric mode, and 0.1 mil in inches.

The RA 120M provides three distinct scribing modes and two separate scribing axes so that you can optimize the specific configuration best suited to your need. The choice depends upon the compound being scribed and the particular device type that is fabricated on the wafer or substrate.

If the continuous scribe program is selected, the scriber will produce an uninterrupted scribe across the entire length of the material, to the depth programmed during setup. The edge scribe mode allows the RA 120M to scribe a small distance in from the edge of the material.

The scribe length is operator selectable in 1 micron increments between 20 and 10,000 microns, and the beginning of the scribe is always relative to the edge of the material. When an edge scribe is finished, the table indexes automatically and the next scribe starts immediately. Therefore this scribe mode is very fast, since the table only moves a small distance in the scribing direction.

Skip scribing is very useful for situations where an intersection of scribes would interfere with proper operation of the device. In the skip scribe mode, the tool is placed in the scribe position while the table moves a specific scribe length distance; the tool is then raised and the table moves a given distance before the next scribe commences. Parameters are user selectable, and skip scribes between 20 and 10,000 microns may be programmed.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase

Specifications

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 73
Last activity Nov. 21, 2024

Here is a selection of similar machines

See all alternatives

Loading similar machines...

Categories

Menu Categories search

Menu

Start selling

Karl Suss RA120M Automatic Scriber