Specifications

Spindle speed 45 rpm
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

Description

---MACHINE SPECIFICATION---
NO. OF SPINDLES 4 (2 TURNING / 2 LOAD & UNLOAD)
SPINDLE TYPE A2-6
SPINDLE SPEED 4,500 RPM
SPINDLE MOTOR (HP) 20HP
X - AXIS TRAVEL (INCHES) 6.3"
Z - AXIS TRAVEL (INCHES) 9.9"
MAX TURNING DIAMETER 7.8"
MAX TURNING LENGTH 4"
FEED RATES (X/Y/Z AXIS) 6693 IPM / 4724 IPM / 2165 IPM
CHUCK SIZE (INCHES) 8" (NOT INCLUDED)
CARRIER INDEX 1.5SEC/180DEGREE, 1SEC/90DEGREES
DIA CURVEIC COUPLING 28.35"WITH 10,780LBS CLAMPING FORCE

---MACHINE EQUIPPED WITH---
BOX SLIDEWAYS FOR X & Z AXIS
CHIP AIR BLOW DEVICES FOR LOADING CHUCKS - 2 NOS
CHIP CONVEYOR
HIGH PRESSURE COOLANT (100PSI)
MULTIPLE REPETITIVE CYCLES
G70 - G76
TOOL LIFE MANAGEMENT
TOOL GEOMETRY OFFSET
2 SPINDLE ORIENTATION FOR THE LOADING SPINDLES
FANUC ROBOTIC AUTOMATION SYSTEM
(2) LR MATE200/C/R-30IA MATE ROBOTS
(2) ROBOT RISERS
(2) END OF ARM TOOL SYSTEM
SYSTEM INTEGRATION AT INSINKERATOR

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2023
Offers online 28
Last activity July 10, 2024

Description

---MACHINE SPECIFICATION---
NO. OF SPINDLES 4 (2 TURNING / 2 LOAD & UNLOAD)
SPINDLE TYPE A2-6
SPINDLE SPEED 4,500 RPM
SPINDLE MOTOR (HP) 20HP
X - AXIS TRAVEL (INCHES) 6.3"
Z - AXIS TRAVEL (INCHES) 9.9"
MAX TURNING DIAMETER 7.8"
MAX TURNING LENGTH 4"
FEED RATES (X/Y/Z AXIS) 6693 IPM / 4724 IPM / 2165 IPM
CHUCK SIZE (INCHES) 8" (NOT INCLUDED)
CARRIER INDEX 1.5SEC/180DEGREE, 1SEC/90DEGREES
DIA CURVEIC COUPLING 28.35"WITH 10,780LBS CLAMPING FORCE

---MACHINE EQUIPPED WITH---
BOX SLIDEWAYS FOR X & Z AXIS
CHIP AIR BLOW DEVICES FOR LOADING CHUCKS - 2 NOS
CHIP CONVEYOR
HIGH PRESSURE COOLANT (100PSI)
MULTIPLE REPETITIVE CYCLES
G70 - G76
TOOL LIFE MANAGEMENT
TOOL GEOMETRY OFFSET
2 SPINDLE ORIENTATION FOR THE LOADING SPINDLES
FANUC ROBOTIC AUTOMATION SYSTEM
(2) LR MATE200/C/R-30IA MATE ROBOTS
(2) ROBOT RISERS
(2) END OF ARM TOOL SYSTEM
SYSTEM INTEGRATION AT INSINKERATOR

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Spindle speed 45 rpm
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2023
Offers online 28
Last activity July 10, 2024

Here is a selection of similar machines

Used 2007 KITAKO HS4200N