Specifications

Max wheel Gear Ø 350 mm
Module + 14
Module - 5
CNC type TEX COMPUTER POWER E
Max spindle speed 485 rpm
Max gear width 200 mm
Engine power 15 kW
-------------------
Worked hours
Hours under power
State revised
At local norms yes
Status in production

Description

Table diameter 365mm
Table Hole Diameter 90mm
Minimum Height Of The Piece From The Table 210mm
Maximum Spindle Rotation (Right / Left) 30 °
Fast Axial Feed 750 Mm / min
Rapid Radial Feed 730 Mm / min

The machine was completely retrofitted in 2009 and all the electrical and hydraulic systems were newly refurbished.
The Machine is currently in production so it is visible in operation in the North of Italy.

A TEX COMPUTER POWER E control has been mounted on the machine which uses an ISO programming language.
The axes are controlled by BAUMULLER motors and drives for which assistance can be easily found at BAUMULLER ITALIA.

The maximum workable diameter is approximately 350mm but this also depends on the hob's overall dimensions.
Given the dimensions of the spindle housing, hobs up to module 14 can be mounted.

The machine is supplied with its spindles (about 7 from diameter 32 to diameter 60), hydraulic closing system of the tailstock, for the division and differential gears only some measures are provided.

Over the last year, changes have been made to the axis motors and some improvements to the software part.

Capable of producing m14 parts in DIN8 class.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type User – large company
Active since 2020
Offers online 1
Last activity March 27, 2024

Description

Table diameter 365mm
Table Hole Diameter 90mm
Minimum Height Of The Piece From The Table 210mm
Maximum Spindle Rotation (Right / Left) 30 °
Fast Axial Feed 750 Mm / min
Rapid Radial Feed 730 Mm / min

The machine was completely retrofitted in 2009 and all the electrical and hydraulic systems were newly refurbished.
The Machine is currently in production so it is visible in operation in the North of Italy.

A TEX COMPUTER POWER E control has been mounted on the machine which uses an ISO programming language.
The axes are controlled by BAUMULLER motors and drives for which assistance can be easily found at BAUMULLER ITALIA.

The maximum workable diameter is approximately 350mm but this also depends on the hob's overall dimensions.
Given the dimensions of the spindle housing, hobs up to module 14 can be mounted.

The machine is supplied with its spindles (about 7 from diameter 32 to diameter 60), hydraulic closing system of the tailstock, for the division and differential gears only some measures are provided.

Over the last year, changes have been made to the axis motors and some improvements to the software part.

Capable of producing m14 parts in DIN8 class.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Max wheel Gear Ø 350 mm
Module + 14
Module - 5
CNC type TEX COMPUTER POWER E
Max spindle speed 485 rpm
Max gear width 200 mm
Engine power 15 kW
-------------------
Worked hours
Hours under power
State revised
At local norms yes
Status in production

About this seller

Client type User – large company
Active since 2020
Offers online 1
Last activity March 27, 2024

Here is a selection of similar machines

Overhauled LIEBHERR LN350 Cnc gear hobbing machine