LODHA LI-STF12 Tube Filler for Metal Tubes Verified seller

Description

Tube Filler for Metal Tubes is an ideal machine for use in the pharmaceutical, chemical, cosmetic, foodstuff, and other industries. This tube filler can be used to fill all kinds of semi-viscous and viscous products into soft plastic or flexible compound tubes.

Salient Features:

· Machine compliance as per CGMP standards.

• Up to 50 tubes per minute, depending on the operator.

• Tube filling ranges from 5 gm to 250 gm.

• Complete stainless steel cladding.

• Touch-screen HMI-based automatic.

• Delta makes PLC-operated machines.

• All sensors are Wenglor-made.

• All pneumatics are Janatics or Festo-made.

• All switches are standard L&T or Tecnik-made.

• Piston block filling system.

• Drip proof Shut off the nozzle with the tail flushing system.

• Camfield makes indexers for the indexing system.

• Hindustan/Crompton/Rotomotive make motors.

• Leister (Swiss) makes a hot air gun for laminated or seamless tubes.

• Safety Cabinet with Polycarbonate Doors (optional).

• 12-station rotary system.

• Automatic emergency stop of the machine in case of non-ejection of the tube at the ejection station.

Technical Specification:

Model

LI-STF 12

Production Output

Up to 45 Tubes per Minute

Driven Type

Electrical

Machine Type

Automatic

Pressure

6 bar Air Pressure

Electric Specification

440V, 3 Phase, 50/60Hz

Motor

5 H.P.

Compressor

3 H.P. Motor, 5–6 kg/cm2 with 9 CFM Flowrate