Specifications

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible

Description

Brand : Lucchini
Yom : Des 2017

Technical Parameter Specification Given
Nominal Forging Force : 42 MN
Upsetting Force : 42 MN
Max Press Stroke : 1850
Main Cylinder Quantity : 3
Main Cylinder Dia in mm : n°1 diam.1150 / n°2 diam. 730
Press Daylight : 3900 mm

Press Force Stage (in MN)
Stage 1 (With 1 Cylinder) : 20 MN (central)
Stage 2 (With 2 Cylinder) : 22 MN (lateral 11MN cad)
Stage 3 (With 3 Cylinder) : 42 MN
Distance Between Coloumns axis : 3800*1400 mm
No. of return cylinders : 2
Forging tolerance measured on hot workpiece : +-5mm
Moving table area (width x length x stroke) : 2500 x 5000 x 1900 mm
Die Magazine availability & No. of Dies capacity : no magazine
Tolerance of lower dies to be shifted : +-2mm

No. of Press Strokes at different stages
No. of Main Pumps : 5
Make of Main Pumps : Eustacchio, Worthington, InoxHP
Capacity of Each Pump : 848 liter/min, 220bar
No. of Main Motors : 5
Make of Motors : ABB, FELM(), Pellizzari(1100Hp)
Specification of Motors : Pistons
Total height of the Press : 12000 mm
Height Above the ground level : 9650 mm
Height below the ground level : 2350 mm
Control System of the Press : PLC
PLC Control System Specification : Siemens
SCADA Control System Specifications : Siemens
Encoders Specification : Elcis
Instrumentation Specification : Various

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2020
Offers online 70
Last activity Nov. 7, 2024

Description

Brand : Lucchini
Yom : Des 2017

Technical Parameter Specification Given
Nominal Forging Force : 42 MN
Upsetting Force : 42 MN
Max Press Stroke : 1850
Main Cylinder Quantity : 3
Main Cylinder Dia in mm : n°1 diam.1150 / n°2 diam. 730
Press Daylight : 3900 mm

Press Force Stage (in MN)
Stage 1 (With 1 Cylinder) : 20 MN (central)
Stage 2 (With 2 Cylinder) : 22 MN (lateral 11MN cad)
Stage 3 (With 3 Cylinder) : 42 MN
Distance Between Coloumns axis : 3800*1400 mm
No. of return cylinders : 2
Forging tolerance measured on hot workpiece : +-5mm
Moving table area (width x length x stroke) : 2500 x 5000 x 1900 mm
Die Magazine availability & No. of Dies capacity : no magazine
Tolerance of lower dies to be shifted : +-2mm

No. of Press Strokes at different stages
No. of Main Pumps : 5
Make of Main Pumps : Eustacchio, Worthington, InoxHP
Capacity of Each Pump : 848 liter/min, 220bar
No. of Main Motors : 5
Make of Motors : ABB, FELM(), Pellizzari(1100Hp)
Specification of Motors : Pistons
Total height of the Press : 12000 mm
Height Above the ground level : 9650 mm
Height below the ground level : 2350 mm
Control System of the Press : PLC
PLC Control System Specification : Siemens
SCADA Control System Specifications : Siemens
Encoders Specification : Elcis
Instrumentation Specification : Various

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2020
Offers online 70
Last activity Nov. 7, 2024

Here is a selection of similar machines

Forging Press 4200T