Marchesini Neri BL400VTE-TT Labeller Verified seller

Description

The Marchesini BL400VTE-TT is a continuous movement balcony machine, built in steel in accordance with GMP standards. Support frame and paneling in AISI304 stainless steel. Suitable for applying at high speed one (1) SELF-ADHESIVE VIGNETTE on the upper face of the cases and TWO (2) SELF-ADHESIVE SEALS on the closing corners of the cases with equal or alternating flaps, with toothed belt transport; working in conjunction with other machines in line.

Machine suitable for the installation of:

• an Ink-jet or Laser printing system on the upper face and/or on both sides of the case for printing legible variable data and related 2D code (Datamatrix);
• relative controls with camera.

Machine complete with:
- Power supply at 400 Volt, 3 phases, 50 Hertz, Earth & Neutral wiring;
- Electrical panel on board;
- PLC SIEMENS;
- TP700 Touch Screen operator terminal, 5.7″ color. Seven levels of passwords;
- Accident prevention guards in aluminum and methacrylate. Schmersal type safety switches;
- Stopping the machine if a door is opened;
- Compressed air control pressure switch. With machine stop at low level detection;
- Outgoing cartons counter;
- Rejected cartons counter;
- Work hour counter;
- The machine is equipped with all the safety devices necessary for safe and standard-compliant operation;
- Delivered with CE mark;
- Production speed: up to 400 pieces/minute;
- Switching is done without any extra size parts as only a few adjustments are needed.

Case format
• A (width): Min 20 mm - Max 120 mm
• B (thickness): Min 15 mm - Max 90 mm
• H (length): Min 70 mm - Max 250 mm

Stamps
• A (length): Min 15 mm - Max 80 mm
• B (height): Min 20 mm - Max 60 mm

Seals
• A (length): Min 15 mm - Max 60 mm
• B (height): Min 15 mm - Max 30 mm

Label speed
• From 0 to 60 metres/minute

Roll diameter
• Maximum 400mm

Core diameter
• 45 or 75mm

Production speed
• up to 400/pcs. min

The Marchesini Neri BL400VTE-TT labeller is a cutting-edge machine that ensures precise and efficient labeling operations. With its 400 Volt, 3 phase, 50 Hertz power supply, ground and neutral wiring, it offers dependable performance. The machine is equipped with an electrical cabinet on board and is equipped with a SIEMENS PLC for continuous automation. The TP700 Touch Screen operator terminal, with its 5.7" color display and seven levels of password protection, ensures intuitive operation. Safety is a priority with aluminum and methacrylate safety guards and safety switches of the Schmersal type.