Specifications

Nbr of rolls 3
Shaft diameter 200 mm
Type Vertical
CNC yes
CNC type
Bending speed 5 m/min
-------------------
Length x width x height 2950.0 × 2830.0 × 2920.0
Weight 21000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status visible
Datasheet MG AR200

Description

Hydraulic Section Bending Machine -Output shafts size 200 mm.
-Hydraulic traction tool for HEB -IPE -UPN bending on hard-side.
-Nr. 2 sets of head rollers HEB beam 160 /200 hard-side for traction tool.
-Nr. 1 set of head rollers IPE beams hard-side for traction tool.

-All 3 shafts driven with hydraulic motor and axial gearbox independent.
-Dual speed rolling slow/fast
-Control console movable on wheels with electric commands
-Nr.2 digital readouts on the control console.
-Safety configuration in compliance with machine-tools regulation, CE mark.
-Manuals and schematics original in English.
-Power electric 400 Vac Euro-voltage -50 Hz -30 Kw
-CAPACITY BENDING CHART SEE PHOTO ENCLOSED
-Lateral correctors left and right side with motion hydraulic in three directions,
complete with nr.2 contrast rollers for angle bending leg-in and leg-out.
-Set of universal rolls, 6 pieces interchangeable and adjustable.
-Nr. 1 set of rollers for PIPE 6”

Shipping on 20’ flat rack.
-dimension 295x 283 x H 282 cm -weight 21000Kgs

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2014
Offers online 21
Last activity Nov. 20, 2024

Description

Hydraulic Section Bending Machine -Output shafts size 200 mm.
-Hydraulic traction tool for HEB -IPE -UPN bending on hard-side.
-Nr. 2 sets of head rollers HEB beam 160 /200 hard-side for traction tool.
-Nr. 1 set of head rollers IPE beams hard-side for traction tool.

-All 3 shafts driven with hydraulic motor and axial gearbox independent.
-Dual speed rolling slow/fast
-Control console movable on wheels with electric commands
-Nr.2 digital readouts on the control console.
-Safety configuration in compliance with machine-tools regulation, CE mark.
-Manuals and schematics original in English.
-Power electric 400 Vac Euro-voltage -50 Hz -30 Kw
-CAPACITY BENDING CHART SEE PHOTO ENCLOSED
-Lateral correctors left and right side with motion hydraulic in three directions,
complete with nr.2 contrast rollers for angle bending leg-in and leg-out.
-Set of universal rolls, 6 pieces interchangeable and adjustable.
-Nr. 1 set of rollers for PIPE 6”

Shipping on 20’ flat rack.
-dimension 295x 283 x H 282 cm -weight 21000Kgs

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Nbr of rolls 3
Shaft diameter 200 mm
Type Vertical
CNC yes
CNC type
Bending speed 5 m/min
-------------------
Length x width x height 2950.0 × 2830.0 × 2920.0
Weight 21000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2014
Offers online 21
Last activity Nov. 20, 2024

Here is a selection of similar machines

Used MG AR200 Profile bending machine