Specifications

Working length 3100 mm
Max thickness 35 mm
Mechanical/Hydraulic Hydraulic
Upper roll Ø 430 mm
Lower/lateral rolls Ø 380 mm
Engine Power 20 kW
Prebending Yes
-------------------
Length x width x height 5900.0 × 2000.0 × 2700.0
Weight 20000 kg
Worked hours 0 hours
Hours under power 20 hours
State new
At local norms ---------
Status visible

Description

4 ROLL HYDRAULIC MODEL M3035 - SERIAL 2024

PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING MG BRAND

Bending capacity

-Plate width : 3000 mm
-Rolling plate thickness 35 mm
-Pre-bending 26 mm

minimum bending diameter ID 500 mm depending on plate thickness vs. yield strength

Rolls dimensions: -Useful length 3100 mm
-top roll size 430 mm
-lower roll size 380 mm

Configuration of the machine

• Hardening induction treatment, high strength surface of the 4 rolls
• Pre-bending with pinching setting on plate thickness.
• Powered driven both the central rolls with axial gearbox and direct drive hydro-motor.
• Console electric on wheels with centralized commands joysticks and digital readout.
• Digital electronic reading of the rolls position bending and pre-bending repeatability.
• Conical plate bending hydraulic control of the angle with cone stopper hardened
• Opening front side hydraulic drop-end to unload the finished closed shell.
• Variable speed working roll bending rotation hydraulic speed fast/slow.
• Calibration for welded shells with re-rolling system
• Support arm for large diameters the machine is predisposed ready to plug and run

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2014
Offers online 21
Last activity Nov. 20, 2024

Description

4 ROLL HYDRAULIC MODEL M3035 - SERIAL 2024

PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING MG BRAND

Bending capacity

-Plate width : 3000 mm
-Rolling plate thickness 35 mm
-Pre-bending 26 mm

minimum bending diameter ID 500 mm depending on plate thickness vs. yield strength

Rolls dimensions: -Useful length 3100 mm
-top roll size 430 mm
-lower roll size 380 mm

Configuration of the machine

• Hardening induction treatment, high strength surface of the 4 rolls
• Pre-bending with pinching setting on plate thickness.
• Powered driven both the central rolls with axial gearbox and direct drive hydro-motor.
• Console electric on wheels with centralized commands joysticks and digital readout.
• Digital electronic reading of the rolls position bending and pre-bending repeatability.
• Conical plate bending hydraulic control of the angle with cone stopper hardened
• Opening front side hydraulic drop-end to unload the finished closed shell.
• Variable speed working roll bending rotation hydraulic speed fast/slow.
• Calibration for welded shells with re-rolling system
• Support arm for large diameters the machine is predisposed ready to plug and run

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Working length 3100 mm
Max thickness 35 mm
Mechanical/Hydraulic Hydraulic
Upper roll Ø 430 mm
Lower/lateral rolls Ø 380 mm
Engine Power 20 kW
Prebending Yes
-------------------
Length x width x height 5900.0 × 2000.0 × 2700.0
Weight 20000 kg
Worked hours 0 hours
Hours under power 20 hours
State new
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2014
Offers online 21
Last activity Nov. 20, 2024

Here is a selection of similar machines

plate roll 3000x35 mm 4roll