MSI K8T Neo-V (Sock

Listing description

PU

• Supports 64-bit AMD® Athlon™ 64, Sempron™ and Turion™ 64 processor (Socket 754)
• Supports Athlon™ 64 2800+ ~ 3700+ and Sempron 2600+ ~ 3300+
• Please refer to CPU Support for compatible CPU; the above description is for reference only.

Chipset

• VIA® K8T800 Chipset
- HyperTransport™ connection to AMD® Athlon™ 64 processor
- 8 or 16 bit control/address/data transfer both directions
- 800/600/400/200MHz "Double Data Rate" operation both direction
- AGP v3.0 compliant with 8x transfer mode

• VIA® VT8237R Chipset
- Integrated Hardware Sound Blaster/Direct Sound AC97 audio
- Ultra DMA 66/100/133 master mode PCI EIDE controller
- Supports 2 Serial ATA
- Supports 8 USB2.0 ports
- ACPI & PC2001 compliant enhanced power management

Main Memory

• Supports DDR266/333/400 DDR SDRAM for two 184-pin DDR DIMMs
• Supports a maximum memory size of 2GB

Slots

• One AGP 8x slot
- AGP 3.0 specification compliant
• Four 32-bit v2.3 Master PCI bus slots (support 3.3v/5v PCI bus interface).

On-Board IDE/SATA

• An IDE controller on the VIA® VT8237R chipset provides IDE HDD/CDROM with PIO, Bus
Master and Ultra DMA 66/100/133 operation modes
- Can connect up to 4 IDE devices

• Serial ATA/150 controller integrated by VIA® VT8237R
- Up ot 1.5Gb/s transfer rate
- Can connect up to 2 serial ATA devices

Audio

• 6 channels software audio codec Realtek® ALC655
- Compliance with AC97 v2.3 Spec.
- Meet PC2001 audio performance requirement.

LAN

• Realtek® 8201CL LAN PHY
- Supports 10/100Mb/s auto-negotiation operation
- Compliant with PCI v2.2.
- Supports ACPI Power Management.

Internal I/O Connectors

- ATX 20-Pin power connector
- 4-pin ATX 12V power connector
- CPU FAN x1 / System FAN x1
- CD-in connector
- Clear CMOS jumper
- Chassis intrusion switch connector
- 1 x Serial port connector
- 1 x Floppy disk drive connector
- 2 x ATA 133 IDE drive connectors
- 2 x SATA drive connectors
- 2 x USB 2.0 connector support additional 4 ports
- Front panel connector
- Front panel audio connector

This equipment is located in US