Specifications

Ø above the bed 2480 mm
Max workpiece weight 16000 kg
Overhauled no
Tailstock no
Steady no
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status in production

Description

Plandrehmaschine, gebraucht
facing lathe, used
Typ/ type: DP 2 S 2
Hersteller/ make : WMW Magdeburg
Baujahr/ year of make: 1984
Planscheibendurchmesser/ face plate : 1600 mm
Spitzenhhe/ height of center: 1250 mm
Drehdurchmesser ber Bett / max. swing: 2480 mm
Max. Werkstckgewicht/ max. weight of work: 4 t bei fliegender Einspannung
Max. Werkstckgewicht/ max. weight of work: 16 t
Drehmeielquerschnitt / max. size of chisel: 50 mm
Spindellagerdurchmesser vorn /
work.spindle at front bearing : 280 mm
Spindelbohrung/ bore of spindle: 100 mm
Hauptspindeldrehzahlbereich/ speeds of spindle: 2,24.. 224 U/ min // rpm
Vorschubantrieb/ drive of feed: Vorschub/ min.feed: 0,355...125 mm/ min
Beim Gewindeschneiden /
at thread cutting ...240 mm / U// mm per round
Anschlusswert / load: 55 kW

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2021
Offers online 3
Last activity Sept. 19, 2024

Description

Plandrehmaschine, gebraucht
facing lathe, used
Typ/ type: DP 2 S 2
Hersteller/ make : WMW Magdeburg
Baujahr/ year of make: 1984
Planscheibendurchmesser/ face plate : 1600 mm
Spitzenhhe/ height of center: 1250 mm
Drehdurchmesser ber Bett / max. swing: 2480 mm
Max. Werkstckgewicht/ max. weight of work: 4 t bei fliegender Einspannung
Max. Werkstckgewicht/ max. weight of work: 16 t
Drehmeielquerschnitt / max. size of chisel: 50 mm
Spindellagerdurchmesser vorn /
work.spindle at front bearing : 280 mm
Spindelbohrung/ bore of spindle: 100 mm
Hauptspindeldrehzahlbereich/ speeds of spindle: 2,24.. 224 U/ min // rpm
Vorschubantrieb/ drive of feed: Vorschub/ min.feed: 0,355...125 mm/ min
Beim Gewindeschneiden /
at thread cutting ...240 mm / U// mm per round
Anschlusswert / load: 55 kW

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Ø above the bed 2480 mm
Max workpiece weight 16000 kg
Overhauled no
Tailstock no
Steady no
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status in production

About this seller

Client type Reseller
Active since 2021
Offers online 3
Last activity Sept. 19, 2024

Here is a selection of similar machines

Niles DP2 S2 heavy duty lathe