Northwood 265T

Listing description

16502 Northwood model 265T
460v, 3 phase
Year 1999

2 60”x 60” moving tables, each machined table with two vacuum zones.
Extra heavy duty fixed gantry bridge and moving table with 1 1/2” thick aluminum tooling plate.

11kw Eurospindle router with programmable spindle speeds of 3,600-18,00 RPM and an 8 position automatic tool changer

Including 12 toolholders, collets and set up stand.

7.5 horizontal 360 degree programmable molding head, 6,000 RPM.
6” max tool length and 5” max tool diameter.
5hp arbor saw in both Y and X axis
Drilling block with vertical and horizontal spindles
40 hp Travini vacuum pump
1 seat of Alpha cam version 6

Closed loop AC servo drive system with precision ground ball screws for positioning.
1,000 IPM max, positioning feed rate, X travels 188”, Y 68”, Z axis 8”

Extended gantry bridge for full table coverage when both tables are locked together, all axes ride on large STAR precision contour linear guides w/STAR linear drive modules

GE/Fanuc “16 M” series computer control system featuring 4 linear axes simultaneous control (3 horizontal & 1 Vertical) 10” high resolution monitor, RS -232 port, hand held controller.

Feed rate and spindle speed override.
Linear, circular & helical interpolation in inch or metric; automatic acceleration and deceleration.

Part programming can be done offline through a direct link from office PC using any popular CAD/CAM packages

Complete with air conditioned cabinet

Machine has less than 2500 hours of operation, has been cleaned and tested and is in good operating order

This equipment is located in US