Specifications

Type CNC
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

Description

EQUIPPED WITH:
OSP-P100L CNC Control w/CRT
44-Position Automatic Tool Changer
5-Axis Machine Design
3.15" Spindle Bore - A2-8 Spindle Nose
Collet-Type Chuck w/Kitagawa Hydraulic
Actuator
Renishaw Automatic Gauging
C-Axis Zero Offset
Countermeasure For Collision Between H1 Turret
And Tailstock
Tailstock - Lift-Up Chip Conveyor
CATALOG SPECIFICATIONS:
Spindle Bore Diameter 3.15"
Bar Diameter Capacity 2.75"
Swing Over Bed, Maximum 21.65"
Swing Over Saddle 20.87"
Work Diameter, Maximum 21.65"
Work Length, Maximum 39.37"
X-Axis Travel, XA Turret 18.70"
X-Axis Travel, XB Turret 6.30"
Z-Axis Travel, ZA Turret 40.06"
Z-Axis Travel, ZB Turret 45.47"
Y-Axis Range 160 (+80 to -80)
Y-Axis Range 6.30 (+3.15 to -3.15)
C-Axis Rotation, Range 360-DEGREES
C-Axis Rotary Control Angle 0.001-DEGREES
B-Axis Angle 210-DEGREES
B-Axis Indexing 1-DEGREE
Main Spindle Speeds, Range to 5000 RPM
Milling Spindle Speeds, Range to 6000 RPM
Tailstock Quill Diameter 3.54"
Tailstock Bore Taper 5 MT
Tailstock Quill Travel 5.91"
Main Spindle Horsepower 30/20 HP
Milling Spindle Horsepower 15/10/7.5 HP
Overall Dimensions, L x W 170" x 100"
Overall Height 114"
Weight Approximately 25300 LBS

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2008
Offers online 51
Last activity Dec. 12, 2024

Description

EQUIPPED WITH:
OSP-P100L CNC Control w/CRT
44-Position Automatic Tool Changer
5-Axis Machine Design
3.15" Spindle Bore - A2-8 Spindle Nose
Collet-Type Chuck w/Kitagawa Hydraulic
Actuator
Renishaw Automatic Gauging
C-Axis Zero Offset
Countermeasure For Collision Between H1 Turret
And Tailstock
Tailstock - Lift-Up Chip Conveyor
CATALOG SPECIFICATIONS:
Spindle Bore Diameter 3.15"
Bar Diameter Capacity 2.75"
Swing Over Bed, Maximum 21.65"
Swing Over Saddle 20.87"
Work Diameter, Maximum 21.65"
Work Length, Maximum 39.37"
X-Axis Travel, XA Turret 18.70"
X-Axis Travel, XB Turret 6.30"
Z-Axis Travel, ZA Turret 40.06"
Z-Axis Travel, ZB Turret 45.47"
Y-Axis Range 160 (+80 to -80)
Y-Axis Range 6.30 (+3.15 to -3.15)
C-Axis Rotation, Range 360-DEGREES
C-Axis Rotary Control Angle 0.001-DEGREES
B-Axis Angle 210-DEGREES
B-Axis Indexing 1-DEGREE
Main Spindle Speeds, Range to 5000 RPM
Milling Spindle Speeds, Range to 6000 RPM
Tailstock Quill Diameter 3.54"
Tailstock Bore Taper 5 MT
Tailstock Quill Travel 5.91"
Main Spindle Horsepower 30/20 HP
Milling Spindle Horsepower 15/10/7.5 HP
Overall Dimensions, L x W 170" x 100"
Overall Height 114"
Weight Approximately 25300 LBS

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Type CNC
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2008
Offers online 51
Last activity Dec. 12, 2024

Here is a selection of similar machines

OKUMA Macturn 250-2S/1000