PEHAKA HS 620 / 1000 GBS Band saw Verified seller

Description

Miter cut sawing system for steel construction
Column-guided miter cut band saw semi-automatic PEHAKA
type HS 620 / 1000 GBS
Machine no. 39093 Year of manufacture 1995 / Electric Overhauled in 2011
Cutting area round at 45-90° Ø 650 mm
Cutting area flat at 90° 1010 x 650 mm
Cutting area flat at 75° left 950 x 650 mm
Cutting area flat at 60° left 830 x 650 mm
Cutting area flat at 45° left 650 x 650 mm
Cutting area flat at 30° left 410 x 650 mm
Cutting area flat at 75° right 950 x 650 mm
Cutting area flat at 60° right 830 x 650 mm
Cutting area flat at 45° right 650 x 650 mm
Saw band dimensions 10480 x 54 x 1.6 mm
Saw band speed 14-160 m/min. infinitely variable
smallest remaining piece length / clamping length 80 mm
vice clamping range 0-1010 mm
material inlet height 840 mm
hydraulic drive power approx. 2.2 kW
saw motor drive power 5.5 and 7.8 kW (pole-changing)
mains connection 400 volts, 50 Hz, approx. 15 kW
- CNC control SIEMENS S7 with touch panel, electrically overhauled in 2011
- saw band speed via 2-stage drive motor and infinitely variable speed adjustment
- fully hydraulic band saw in two-column design
- hydraulic saw bow lowering with infinitely variable cutting pressure adjustment
- lowering speed infinitely variable
- mitre adjustment via motor-driven swivel saw unit, with angle setpoint specification via the control and actual value digital display
- working height button for increased lowering speed before sawing
- hydraulic double vice clamping
- hydraulic unit on the bow of the saw unit
- motor-driven Saw band cleaning brush Ø 80 mm
- driven material conveyor rollers on the inlet and outlet side with gear motor
- coolant device with cooling lubricant pump for water emulsion (was not used)
- minimum quantity lubrication for the saw blade
- chip conveyor with motor drive inserted in the machine bed
- controlled length stop up to 9000 mm with motor-driven swiveling material
stop Stop length approx. 9700 mm, stop travel 9000 mm,
- inlet roller conveyor with roller drive 15.5 meters, roller width 1000 mm, total width 1500 mm
20 rollers Ø 90 mm, rollers driven by gear motor, height 840 mm, load capacity 400 kg/m
- outlet roller conveyor 10 meters, roller width 1000 mm, 15 rollers Ø 90 mm, height 840 mm, + cross conveyor
Space requirement of the saw system L x W approx. 27 x 6 meters
Transport space required for the saw unit L x W x H approx. 560 x 300 x 330 cm
Weight of the saw unit approx. 9 ton.
Transport space required for the infeed roller conveyor length 13.5 meters x width 3 meters x height 140 cm
Weight of the infeed roller conveyor approx. 8 ton. (transported in one piece with 2x auxiliary supports for stabilization)
Transport space required for the stop roller conveyor length 10.5 meters x width 3 meters x height 200 cm (6 cross conveyors are separated at 3 meters wide)
Weight of the stop roller conveyor approx. 8 ton. (transported in one piece with 2x auxiliary supports for stabilization)
good condition