Ponar Żywiec UT 025 H Injection moulding machine Verified seller Good value

9,180 €

Make an offer

Manufacturer	Ponar Żywiec
Model	UT 025 H
Year	2005
Location	Poland
Category	Injection moulding machines
Product id	P220714098
Language	Ponar Żywiec UT 025 H Vstřikolis Ponar Żywiec UT 025 H Ponar Żywiec UT 025 H Ponar Żywiec UT 025 H Spritzgießmaschine Ponar Żywiec UT 025 H Ponar Żywiec UT 025 H Injection moulding machine Inyectora de plástico Ponar Żywiec UT 025 H Presse à injecter Ponar Żywiec UT 025 H Ponar Żywiec UT 025 H Ponar Żywiec UT 025 H Pressa ad iniezione Ponar Żywiec UT 025 H Ponar Żywiec UT 025 H Ponar Żywiec UT 025 H Wtryskarka Ponar Żywiec UT 025 H Ponar Żywiec UT 025 H Ponar Żywiec UT 025 H Ponar Żywiec UT 025 H Термопластавтомат Ponar Żywiec UT 025 H Ponar Żywiec UT 025 H Enjeksiyon kalıplama makinesi Ponar Żywiec UT 025 H

Details
About this seller

Specifications

Clamping force	25 T
Screw diameter	22 mm
Tie bar spacing (H)	300 mm
Tie bar spacing (V)	300 mm
Shot volume	30 cm³
Shot weight	27.3 g
Platen length	475 mm
Platen width	475 mm
Robot interface
Number of heating zones	3
Opening of the press	300 mm
Mould size
-------------------
Length x width x height	2500.0 × 1000.0 × 1750.0
Weight	1470 kg
Worked hours
Hours under power
State	good
At local norms	---------
Status

Description

The PONAR ŻYWIEC UT-025 H injection molding machine was manufactured in 2005 in Poland. The machine is used for processing thermoplastics by injection molding, and is characterized by a double-plate hydraulic mold closing system, operating with a force of 25 tons. The mounted plastic injection molding screw with a diameter of 22 mm is driven directly by a hydraulic motor and rotates at a speed in the range of 10 to 370 rpm.

The injection molding machine allows the installation of injection molds with a minimum height of 175 mm, while the plates for fixing the molds are 475 mm long and 475 mm wide. The modern MITSUBISHI FX2N-48MT-ESS / UL PLC controller allows the injection molding machine to operate in selected manual or automatic modes, as well as to set and control working parameters. The total weight of the machine is 1,470 kg.

Technical data of the injection molding machine for plastics PONAR ŻYWIEC UT 025 H

- maximum force closing the mold: 25 t (250 kN)
- maximum mold opening force: 4.5 t (45 kN)
- maximum mold opening stroke: 300 mm
- minimum mold height: 175 mm
- dimensions of the plates for fixing the mold (length x width): 475 x 475 mm
- maximum clearance between the plates: 475 mm
- clearance between columns: 300 x 300 mm
- hydraulic ejector force: 16.5 kN
- hydraulic ejector stroke: 80 mm
- injection volume: 30 cm3
- maximum injection weight: 27.3 g
- maximum injection efficiency: 37 g / s
- maximum injection pressure: 214 Mpa
- screw diameter: 22 mm
- screw stroke: 80 mm
- screw rotation speed: 10 - 370 rpm
- maximum screw torque: 200 Nm
- pressure force of the injection nozzle: 60 kN
- injection nozzle stroke: 180 mm
- installed heating power: 3.7 kW
- number of heating zones: 3 + nozzle
- hydraulic pump drive power: 5.5 kW
- total installed power: 9.2 kW
- oil tank capacity: 80 dm3
- hydraulic system pressure: 18 Mpa
- dimensions of the UT-025 H machine (length x width x height): 2.5 x 1 x 1.75 m
- total weight: 1470 kg

Equipment of the injection molding machine PONAR ŻYWIEC UT-025 H

- PLC controller: MITSUBISHI FX2N-48MT-ESS / UL
- HMI panel: MITSUBISHI E600
- plastic feeder
- pillows: 4 pcs.
- air valves: 2 pcs.
- DTR - technical and operational documentation

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase

Client type	Reseller
Active since	2010
Offers online	341
Last activity	Nov. 15, 2024

Description

Specifications

Clamping force	25 T
Screw diameter	22 mm
Tie bar spacing (H)	300 mm
Tie bar spacing (V)	300 mm
Shot volume	30 cm³
Shot weight	27.3 g
Platen length	475 mm
Platen width	475 mm
Robot interface
Number of heating zones	3
Opening of the press	300 mm
Mould size
-------------------
Length x width x height	2500.0 × 1000.0 × 1750.0
Weight	1470 kg
Worked hours
Hours under power
State	good
At local norms	---------
Status

About this seller

Client type	Reseller
Active since	2010
Offers online	341
Last activity	Nov. 15, 2024

Ponar Żywiec UT 025 H Injection moulding machine Verified seller Good value

Specifications

Description

Description

Specifications

About this seller

Here is a selection of similar machines

Categories

Menu

Ponar Żywiec UT 025 H Injection moulding machine