Quattro Peak L Plus PCB Reflow oven Verified seller

Description

Quattro Peak L Plus in excellent condition

Specifications:
Overall dimensions
Length (with 3-stage cooling zone): 5.) 6714 mm
Width: 1435 mm
Height (in delivery condition / incl. warning light): 2.) 1647 mm / 2233 mm
Inlet height, adjustable by customer: 2.) 830 ... 1030 ±20 mm
Weight approx. 2800 kg
Number / diameter foot: 14 / 80 mm
Max. floor loading: 750 kg/m²
Process area
Length: 6392.5 mm
Pre-heating zones: 5
Peak zone (top/bottom): 3 peak zones with 6 heating modules (3 top/3 bottom)
Bottom heating modules pre-heating zones (option): 5
Heated tunnel length, total: 4167 mm
Active convection length: Length of cooling zone 1- / 2- / 3- / 4- / 5-stage: 1278.5 / 1752 / 2225.5 / 2822.5 / 3296 mm
Temperature measurement: NiCr-Ni sensors in the hot gas flow
Warm-up time: approx. 30 min.
Heat transfer: 100% forced convection
Process temperature (pre-heating zone/peak zone): max. 300 °C (pre-heating zone) / 350 °C (Peak)
Transport chain conveyor
Working width usable with PCB support: 60 ... 510 mm
Usable working width with PCB support: PIN level ... -10 mm
Pass through height (top/bottom): 30/30 mm
Max. loading: 3 kg/m
Transport mesh belt conveyor
Usable working width: 500 mm
Pass through height (top): 30 mm
Max. loading: 3 kg/m
Conveyor speed 0.2 ... 3.0 m/min
Average conveyor speed 0.7 ... 1.2 m/min.
Exhaustion 3.)
Suction pipe: 1 x Ø 200 mm
Required exhaust air at pipe (inlet): approx. 600 … 800 m3/h
Temperature of exhaust air at the pipe: < 50 °C
Internal exhaust air resistance of oven: 3 - 8 mbar
Continuous sound pressure level < 70 dB(A)
Control Unit CDIAS with RT 7
Nitrogen supply * 4.)
Connecting armature (clamped joint for Cu-pipe): R 3/8“ internal thread
Working pressure (at connecting armature): 6 ... 8 bar approx. 9 m3
N2-consumption, steady state condition and transport width 220 mm: 6.) approx. 9 m3/h
N2-consumption, full load and transport width 220 mm: 7.) approx. 15 m3/h
Readiness for the system (1000 ppm, N2 < 5 ppm O2): approx. 15 min.
Power supply
Connecting power supply: 3~N, PE 230 / 400 V, 50 Hz
Max. current consumption per phase: 95A
Power consumption during heat-up: 64 kW
Power consumption steady state condition: 1.) approx. 9 kW h

For further information please do not hesistate to contact us.