Description
Single column - eccentric press RICHTER type PEKRS 80
Year of construction 1970 - overhaul 2023
Pressure force 80 tons.
projection 350 mm
Table size 900 x 650 mm
Fall-through hole in the clamping table Ø 200 mm
Ram area 700 x 500 mm
Number of strokes 70 strokes/min.
Stroke adjustment 6 - 100mm
Ram adjustment 85 mm
Installation height max. 400
Clamping spigot hole Ø 50 mm
Table height above floor 810 mm
Motor power 8 kW
Mains connection 400 volts, 50 Hz
- Pneumatic clutch-brake combination ORTLINGHAUS
- Press safety valve HERION
- pneumatic ram balancing cylinders
- Overload protection with rupture plate in the ram
- Central grease lubrication with hand pump
Required space L x W x H 1800 x 1250 x 2830 mm
Weight 5.7 tons.
very good condition
Technically overhauled and rebuilt with new electrics to the latest UVV, completion 02/2023
- Upgrading the eccentric press to the latest UVV according to BGR 500, Chapter 2.3
- Control with plain text error messages and diagnostic screen for quick error localization
- new electrical cabinet mounted on the side of the machine
- completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display
- Two-hand control panel with emergency stop and engagement lock
- el. foot switch
- Cam switch mechanism with run monitor control
- Stroke triggering by press safety valve with pneumatic pressure compensator
- Rewiring of the machine
- Updated user manual
The machine is equipped with 6 operating modes:
1 = Setup
2 = single stroke two-hand
3 = single lift foot
4 = endurance foot
5 = auto. endurance run
6 = reverse run
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase