Description
Embroidery machine Saurer Epoca 2 16.3 yards - year 2003
Excellent état, Trés bien entretenu,
This machine can be used to embroider fabrics for lingerie, furnishings, ready-to-wear and guipure.
It can be configured according to the needle ratio programme for large or small patterns, as well as according to the colour of the bobbins.
Cuts threads automatically front and back at needle ratio change and at the completion of the pattern.
It includes 552 pins for English embroidery.
Embroiders 14.50 metres long and 160cm wide thanks to its 165cm frame.
Total length of the machine: 18 meters
Can work with up to 552 new needles and shuttles.
Production speed is 360 stitches per minute.
Net weight: 18.5 Tons
Air consumption with cut thread: 0,84 m³/h
The machine operates with a programme on floppy disk.
The computer system is SLM.
White shuttle holders.
New monitoring screen
General technical data:
Minimum needle ratio: 4/4 inches French = 27.07 mm
Lateral displacement: Max. ratio 120/4 = 810 mm
Lateral displacement with transport: Max. ratio 104/4 = 700 mm
Minimum stitch unit: 0.1 mm horizontally and vertically
Drilling depth: 0 to 20 mm continuous (= max. ⌀4.2 mm for 12% drill)
Standard coil dimensions (LxD): 85 x 50 mm
Cones:
230 x 125 mm (4/4), embroidery height 1250/1650
200 x 150 mm (8/4), embroidery height 1250/1650
230 x 125 mm (8/4), embroidery height 850
Shuttles: Saurer TOP steel or carbon ("Silenzio")
Dimensions of cocoons:
Steel 43 x 15.2 mm
Carbon 43(0/-0.2) x 14.7(0/-0.2) mm
Fabric roll ⌀:
not wound: ⌀80 mm;
wound: max. ⌀110 mm
Compressed air:
Min. pressure 6.5 bar; without oil; filtered 5 μm
Moisture content: max. 1% (water mass in the air)
Supply tube: ⌀13mm
Maximum sound power: Leq = 86 dB (A) Middle on needle side;machine distance 1 m, 1.6 m above ground level.
Command:
Usage: Color Touch Screen, Remote Control Manual, Winding Keyboard, Foot Switch
Data format: Standard Highlevel Code (SHC); Standard Lowlevel Code (SLC)
Interface: LAN; 3 1/2" MS-DOS floppy
Internal memory capacity: > 20 Mio. SHC functions (> 100,000 meters of cardboard)
Floppy memory capacity: ~ 280,000 SHC functions (~ 1,400 metres of cardboard)
Thread breakage: individual, for each embroidery position
Drills control: Double lifting by AC servo motors
Controls: Without maintenace, brushless AC servo motors
Lightning protection: Fine protection (power supply)
Electrical data, ambient conditions:
Rated voltage: Three-phase current, 400 V AC + protective conductor
Max voltage variations: +/- 10% of nominal value
In case of large discrepancies: stabilize the diet
Pre-usable: 32 Delayed to 3 phases (cable thickness min. 4 x 6 mm²
Rated power: 16.3 yd: 5 kVA
Frequency range: 50/60 Hz +/- 2%
Ambient temperature: 5 to 35°C (recommended: 20°-30°C; variations: +/- 2°C)
Relative humidity: max. 60% at 35°C; max. 90% at 20°C (recommended: 55-65%)
Maximum altitude: 2300m above sea level
Une version de logiciel:
Emfamily
CHS
EM HOST
Armoire:
PANTEC SLM Version B 18-09-2003
Systeme:
Pentacut
Pentamat
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase