SCM SCM DMC SYSTEM TC 1350 Wide belt sander

Description

● Working width 1350 mm.
● Support structure for longitudinal units with a sanding belt length of 2620 mm.
● Control panel on the machine body.
● Threading of sanding belts on the left side of the machine.
● Feed conveyor speed from 2 to 16 m/min.
● Automatic centering of the conveyor belt by means of a transversely moving roller.
● Rubber-coated pressure rollers in front and behind the processing units.
● Hydra V-Pad electronic control unit with 10.4" touch screen.
● PLC controller "X20" to control all operating functions of the machine.
● Self-diagnosis of faults with an additional set of functions.
EMERGENCY AND PROTECTIVE DEVICES
● Emergency shutdown panel at the machine input.
● Emergency shutdown buttons on the front and back of the machine.
● General power switch with the ability to lock with a padlock.
● Electronic emergency shutdown systems in case of lateral movement, rupture and insufficient tension of the sanding belt.
● Emergency shutdown in case of insufficient pressure or lack of compressed air
● Electronic alarm for lateral movement of the conveyor belt.
● Electric brake wear monitoring sensors.
● Automatic motor protection switches.
● Limit switch to control the entry of the workpiece into the machine.
● Limit switch to protect against workpieces with too large an allowance in thickness being fed into the machine.
● Rubber-coated pressure roller at the machine entrance with a device to prevent the workpiece from being thrown back.