Specifications

-------------------
Length x width x height 22000.0 × 5500.0 × 6000.0
Weight 20000 kg
Worked hours 100 hours
Hours under power 100 hours
State like new
At local norms ---------
Status visible

Description

Dryer for grains / seeds and herbal plants

The dryer includes: belt dryer, feeder systems (belt or screw) for feeding and receiving the raw material, automated control of the dryer from a touch panel located on the control cabinet.

Characteristic

1. Dryer

the possibility of using energy sources such as: gas, heating oil, technical steam, hot water, waste heat from a biogas plant,
when using waste heat in a biogas plant, a heat source is used
from cooling power generators, which results in high savings while promoting ecology,
flexibility of drying various loose materials,
adjusting the work system to different moisture content of the raw material by drying in a continuous or intermittent cycle.
2. Belt dryer chamber

modular design (expandable with additional modules),
thermal isolation,
insulated inspection doors (easy access for maintenance and bearing lubrication),
adjustable height of legs in each module (made of galvanized steel),
sprinkler system above each belt,
drain water holes (cleaning).

3. Conveyor belts

polyester tapes dedicated to loose and fine materials,
belt width: 2990mm,
drive by means of driving drums (in fig. 3),
spreading the raw material on the belt (in fig. 2),
a feeder receiving the dried raw material.

4. Control

automation and simple operation of the device,
control from the touch panel,
temperature sensors (2-3 pcs.),
speed control of belts, fans and feeders by means of an inverter.


5. Fans

exhaust fans (in fig. 7),
ventilation ducts (in fig. 6).


6. Heater
FPM500 model
purpose - generating a stream of hot air with optimal temperature, set by the control system
burner supply - LPG gas
detailed description of the heater and burner in separate documents

7. Loading of raw material

by means of a conveyor belt (in fig. 1),
even distribution of the raw material (stand, platform),
at a height of about 3,000mm.

8. Unloading of raw material: by means of a belt feeder, side discharge.


9. Drive: gear motor for each level separately,

10. Power: 55kW

11. Power supply: 3 x 400V

12. Machine dimensions
length: 22,000mm,
width: 5 500mm,
height: 6,000mm.

13. Total weight: approx. 20,000 kg


14. Production year: 2020

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type User – large company
Active since 2022
Offers online 1
Last activity Dec. 23, 2024

Description

Dryer for grains / seeds and herbal plants

The dryer includes: belt dryer, feeder systems (belt or screw) for feeding and receiving the raw material, automated control of the dryer from a touch panel located on the control cabinet.

Characteristic

1. Dryer

the possibility of using energy sources such as: gas, heating oil, technical steam, hot water, waste heat from a biogas plant,
when using waste heat in a biogas plant, a heat source is used
from cooling power generators, which results in high savings while promoting ecology,
flexibility of drying various loose materials,
adjusting the work system to different moisture content of the raw material by drying in a continuous or intermittent cycle.
2. Belt dryer chamber

modular design (expandable with additional modules),
thermal isolation,
insulated inspection doors (easy access for maintenance and bearing lubrication),
adjustable height of legs in each module (made of galvanized steel),
sprinkler system above each belt,
drain water holes (cleaning).

3. Conveyor belts

polyester tapes dedicated to loose and fine materials,
belt width: 2990mm,
drive by means of driving drums (in fig. 3),
spreading the raw material on the belt (in fig. 2),
a feeder receiving the dried raw material.

4. Control

automation and simple operation of the device,
control from the touch panel,
temperature sensors (2-3 pcs.),
speed control of belts, fans and feeders by means of an inverter.


5. Fans

exhaust fans (in fig. 7),
ventilation ducts (in fig. 6).


6. Heater
FPM500 model
purpose - generating a stream of hot air with optimal temperature, set by the control system
burner supply - LPG gas
detailed description of the heater and burner in separate documents

7. Loading of raw material

by means of a conveyor belt (in fig. 1),
even distribution of the raw material (stand, platform),
at a height of about 3,000mm.

8. Unloading of raw material: by means of a belt feeder, side discharge.


9. Drive: gear motor for each level separately,

10. Power: 55kW

11. Power supply: 3 x 400V

12. Machine dimensions
length: 22,000mm,
width: 5 500mm,
height: 6,000mm.

13. Total weight: approx. 20,000 kg


14. Production year: 2020

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

-------------------
Length x width x height 22000.0 × 5500.0 × 6000.0
Weight 20000 kg
Worked hours 100 hours
Hours under power 100 hours
State like new
At local norms ---------
Status visible

About this seller

Client type User – large company
Active since 2022
Offers online 1
Last activity Dec. 23, 2024

Here is a selection of similar machines

SELWA SE22/5