Year:1997
No. 01 Autonomer Schlafhorst 238 G of 12 to 40 spindles, input with tubes of 600 mm, out-put in 6/8/10 inch. Thermo splicer. Automatic Doffing. Cleaner device Uster MK30 or Loepfe TK 770.Year:1986
CORMATEX ENTRANCE 3000 MM WITH UTILITY OUTPUT 4200 MM WITH ELECTRIC PANEL TO STANDARDS WITH THE PLC FOR FOLDING SETTINGS OF OUTPUT HEIGHTS.Year:
Wool carding machine HDB This is double rubbing Ateliers Houget Verviers (Belgium) Work width -2500. Condenser tapes is 16mm. Feeding-mechanical-automatic. Amount per feeding 200-500gr. Output 35-50m/min Diameter of cilynder 1500mm. Power 2x13 kw. Machine is good condition and after reconstruction feeding,banding transporter,doffers and condenser tapes is with electrical driver. All machine is work with electrical controller driver.Year:
Ramella assortment consisting of 6 cards and loading with electronic scale. Equipped with an electronic panel for the operation of the machine. Divider made up of 288 wires. Working height 3m.Year:1980
Working width | 220 cm |
---|---|
Nbr of drums | 2 |
Width | 2200 mm |
---|---|
Ø of drums | 1300 mm |
Year:1992
3 RIETER cards type C4-A, year 1992, with TRÜTZSCHLER chute feed system type FBK 533 (year 2004), AutoSilver control type EZA–1, auto lever, auto doffer, pot diameter 60 cm, pot height 110 cm 1 RIETER card type C4, year 1987, with TRÜTZSCHLER chute feed system type FBK 533 (year 1999), AutoSilver control type EZA–1, auto lever, auto doffer, pot diameter …Year:1998
Working width | 200 cm |
---|---|
Ø of drums | 150 mm |
Width | 2000 mm |
---|
Year:1959
Working width | 1750 cm |
---|---|
Nbr of drums | 2 |
Width | 2200 mm |
---|---|
Ø of drums | 1.3 mm |
Year:1980
I sell beautiful and complete line for processing synthetic and non-synthetic fibers pre-loader carda with powder recovery loader with spreader FOR carda h2,500 with drum 1,500 4 pairs of workers randomizers MECAP brand welder 60 meters/minute with output in 3 mt MECAP oven 10 meters with cooling MECAP cutter WITH 13 blades plus horizontal and vertical pre-cutting system the machine …Year:1994
BEFAMA CARDING MACHINE, 2 DOFFER, MODEL 600, 1994 The machine is after a capital renovation, with new GRAF wiring. General condition is very good, electical cabinet new with stering. Working width is 2000 mm. Maximum productivity is 300 kg/h. Feeding section included. In case of any questions, please do not hesitate to contact ;). Additonaly there is a mixing chamber, …Year:
COSMOPOL C70 Carding machine Opanka soles Opanka sole card for inside carding.Year:1970
CARDA TESSILE LINEA PER T.N.T E CALANDRATURA E ACCOPPIATURA CALANDRA MONTI 2200 H TAGLIERINA H2200 AGUGLIATRICE H 2200 AFFALDATORE H 2500 CARDA FOR H 2000Year:2014
Make: Rieter Model: C70 Year: 2014 Autoleveller: Available Chute Feed Type: C70S Can Changer: Automatic Can Dia: 40" Waste Collection: Continuous No of Licker In: 3 IGS for Cylinder: Available St Flat Back: 4 St Flat Front: 2 with Q packYear:2002
Used Textile Machines Make: Rieter Model: C51 Autoleveller: Available Chute Feed Type: A70 Can Changer: Automatic Can Dia: 40" Waste Collection: Continuous No of Licker In: 1 IGS for Cylinder: Available St Flat Front: 6 St Flat Back: 6 Year of Mfg: 2000, 2001 , 2002Year:~ 1971
Working width | 200 cm |
---|
Width | 2000 mm |
---|
Year:
Working Width: 400 mm Number of Pair Workers/Strippers: 4 Doffer Type: Fancy + Ring Doffer Number of Ends: 11 Condenser Width: 700 mm Rubbing Section: Yes Condition of Card Wire: Excellent Additional Notes: Some drive belts and motor are missing.