Clamping force | 90 T |
Screw diameter | 1.65354 in |
Tie bar spacing (H) | 16.92913 in |
Tie bar spacing (V) | 14.17323 in |
Shot volume | 13.1018 in³ |
Shot weight | 6.7936 oz |
Pressure on material | 1724 bar |
Platen length | 25 in |
Platen width | 12.20472 in |
Number of cores | |
Number of heating zones | |
Opening of the press | 18.70079 in |
Mould size | 210 |
------------------- | |
Length x width x height | 4800.0 × 1156.0 × 2100.0 |
Weight | lb |
Year: 2005
Category: Injection Moulding Manufacturer: BOY Model: 90M Viewing: Undergoing refurbishment Condition: Refurbished with guarantee Year: 2005 Clamp Force (t): 90 Screw Diameter (mm): 48 Max Shot Weight (PS) (g): 252 Control System: Procan Lead Time: 8 weeks from order Hours: circa 36,000 In Production: Yes Nearly fully refurbished by our team is this 2005, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller, 48mm plasticising unit with bi-metallic barrel, single core pull and two 16A sockets. …Price on request
United Kingdom
Year: 2004
This BOY 90M injection moulding machine was built in 2004 in Germany. It has 53100 production hours . This machine can operate with a screw diameter 48 mm.Price on request
Slovenia
Year: 2005
Model: 90M Tons: 99/90 Metric Injection capacity ..... 6.3 grams / 178 grams Screw Diameter: 42mm Close Run: 18.7 "/ 47.5cm Platen Dimensions: 25 "x 24" / 63.5cm X 61cm Opening Max. 28.5 "/ 72.5cm Distance between columns: 17 "x 14" / 43cm X 36cm Control: Procan MDPrice on request
USA
Year: 2002
TECHNICAL DATA Screw Dia [mm]: 42 Shot Weight [g]: 193 Injection Pressure [bar]: 1724 Clamping Force [kN]: 900 Tie Bar Distance [mm]: 430x360 Platen Size [mm]: 635x 610 Mould Height min. [mm]: 250 CONTROL OTHER Power [kW]: 26,3 Workinghours [h]: 17000 Dimensions [m]: 4,8x1,20x2,15 Weight [kg]: 3530Price on request
Poland
Year: 2006
Manufacturer: BOY Model: 90M Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2006 Clamp Force (t): 90 Screw Diameter (mm): 42 Max Shot Weight (PS) (g): 193 Control System: Procan Lead Time: Immediate Hours: circa 36,000 In Production: Yes Awaiting refurbishment at our works is this 2006, BOY 90M injection moulding machine, fitted with 42mm screw. It comes fitted with the Procan controller, air blast, and has circa 36,000 run hours.Price on request
United Kingdom
Year: 2005
Clamping force [kN] 900 Dimensions of mounting plates (hxv) [mm] 635x610 Clearance between columns (hxv) [mm] 430x360 Min./max. mold height [mm] min 250 Maximum opening width [mm] 725 Injection unit Screw diameter [mm] 36 Injection volume [cm3] 157.8 Injection weight [g] 142 Injection pressure [bar] 2347 Electrical and hydraulic equipment Rated power of the pump motor [kW] 15 Heater power [kW] 11.3Price on request
Poland