Chiron FZ 18

Year: 1996

Parameters: Control system: Sinumerik 810 C Number of axes: 4 Operating voltage: 400V 50Hz Number of spindles: 1 Spindle speed infinitely: 20 - 6000 rpm Rapid traverse: 20 m / min Tool holder: SK 40 Travel: X: 630 mm Y: 400 mm Z: 425 mm Number of tools: 20 Tool clamping: mechanical Pallet changer: yes Clamping surface: 1250 x 850 mm Machine weight: approx. 5500 kg Machine dimensions: 1800 x 3400 x 2.900 mm

Year:

CONTROLLER HEIDENHAIN, X axis travel: 2000 mm, Y-axis travel: 400 mm, Z axis travel: 425 mm,

Year: 1999

sold as it is

Year: 1996

Control: Siemens Sinumerik 810 The axes XYZ 2000/400/400 mm Spindle speed 10,000 rpm With four axis (fully driven) Machine weight 7200 kg 85000 hours. under power systematically serviced and partially renovated: - New spindle in 2011 (cost 7.800, - EUR) - The Y-axis 2012 (cost 1.400, - EUR) - The new Z-axis column cover in 2012 (4.800, - EUR) - A new monitor in the year 2013 (1662 - EUR) - Transmission Chain in 2014 (EUR 2,400) - The main …

Year: 2000

Specifications: Table Size 2250 x 460 mm Longitudinal travel (X) 2000 mm Cross travel (Y) 400 mm Vertical travel (Z) 425 mm Spindle taper 40 ISO Stepless spindle speeds 10-10000 rpm Toolchanger ATC 20 pos. Control system Siemens 840D manuf. Controlled in axis 4 Accessories: Chip conveyor. Coolant. CNC Rotary table. Mega 250 Working manuel Length: 4220 mm, Height: 3055, Width: 2500 mm, Weight: 6700 kg

Year: 1996

Control: Sinumerik 810 C Operating voltage: 400V 50Hz Machine dimensions: 1800 x 3400 x 2900 mm Number of spindles: 1 Spindle speed infinitely: 20 - 6000 r / min Rapid traverse 20 m / min Tool: SK 40 Travel: X: 630 mm Y: 400 mm Z: 425 mm Number of tools: 20 Tool clamping: mechanical Pallet changer: yes Clamping surface: 1250 x 850 mm Weight: 5500 kg

Year: 2000

5 axis VMC CHIRON FZ 18 S CNC Control: FANUC 21i-M Condition: very good, during installation X travel: 650 mm Y travel: 400 mm Z travel: 425 mm Tool length 220 mm Tool diameter: max. 65 mm Weight: max. 5 kg At free adjacent places: Max. diameter 180 mm Max. weight 8 kg Tooltaper SK 40 Conoidal hollow shank HSK A63

Year: 2001

Specifications: Longitudinal travel (X) 2000 mm Cross travel (Y) 400 mm Vertical travel (Z) 425 mm Spindle taper 40 ISO Stepless spindle speeds 0-10.000 rpm Tool changer/No. of stations 20 Control system Siemens 840D manuf. Length: 4000 mm, Height: 2973 mm, Width: 2500 mm, Weight: 6700 kg

Year: 1999

CHIRON vertical machining center

Year: 1995

Table dimensions: 600 x 850 mm Longitudinal travel: 750 mm Cross travel: 400 mm Vertical stroke: 425 mm Spindle motor power: 24 HP, Spindle taper: ISO 40, Spindle Speed ​​- RPM / 1 ': 0 to 10500 , spindle Speed ​​Range: 2 electronic; feed speed: 0 to 10000 mm / 1 '; rapid advancements speed: 20000 mm / 1'; tool magazine: 20; Voltage: 380 V, Year Built: 1995/1994; numerical control: SIEMENS 810; Weight: 5900 Kg Height: 2600 - Width: 2300-depth: …

Year: 2006

Year of production: 2006 Working Displacements: X: 2,600mm Y: 520 mm Z: 630 mm Table: 3,200 x 570 mm Tool magazine: 20 pcs. Control: CNC Heidenhain iTNC 530 Machine weight: 7,200 kg

Year: 91

4 axis, turn table The machine was used exclusively in aluminum production and is still under power.

Year: 1997

Year: 1995

This Chiron FZ18 Vertical Machining center was manufactured in the year 1995 in Germany. It is equipped with a SIEMENS SINUMERIK 810M control unit. Machine weight: 5540 kg CNC: Siemens Sinumerik 810M X-Axis Movement: 750 mm Y-Axis Movement: 400 mm Z-Axis Movement: 425 mm Outer length: 1150 mm Outer width: 460 mm Table load: 1200 kg Type of tool holder: SK40 Distance spindle center - stand (throw): 435 mm Distance spindle nose - table: 190 - 612 mm Spindle in …