CMT URSUS PLUS 250

Year:

CMT URSUS 250/8 "flatbed CNC lathe with 105mm spindle drive. technical characteristics Machinable diameter above the bench 505 mm Machinable diameter above the transverse slide 265 mm Max machinable length 1500 mm Stroke X 240 mm Stroke Z 1500 mm Spindle speed 15 to 1500 rpm Number of ranges 2 Spindle motor power 7,5 Kw Pin nose C.L.8 " Spindle boring 105 mm Fast feeds 5 m / min Quick change turret type Manual Tailpipe Type Diameter of the sleeve …

Year: 1995

Vendu avec tout l'outillage mandrin 4 mors, 3 mors, portes outils.... CN CMT long entrepointe 1500 passage de barres diamètre 105 tourelle mutifix 1 outil 2 gammes de vitesse 0à400 et 400à2000trs/min

Year: 1999

TEACH LATHE CMT URSUS 250 PLUS H TIPS 250 MM DISTANCE TIPS 2000 MM PASSAGE 105 MM TOWER MANUAL QUICK CNC ECS 1802 last series ELECTRONICS AND MOTORS FANUC

Year:

V2 electronic control Centre height mm. 250 Distance between centers mm. 1500 Bar passage mm. 105 chuck Tower complete with tool tailstock

Year: 1996

machine in perfect condition height 250 distance between centers 1500 105mm spindle hole CNC SIEMENS V2 complete with terminals, deck and bezel 1996 to "CE" standards very few working hours

Year:

- By learning (conventional) - 2 manual turrets: 1 8 position turret, turret multifix 1. Accessories: - 3-jaw chuck Ø 300 mm, - 3-jaw chuck Ø 250 mm, - 4 jaw chuck Ø 250 mm, - Nails, - 4 doors tools - Vise and hard jaws - 2 glasses. Height: 250 mm Distance between centers: 1500 mm Maximum diameter above the bed: 505 mm

Year: 1993

Center height 250 mm. Distance between centers 1,000 mm. Ø 265 mm on the wagon. Ø 505 mm on the bench. Ø 105 mm spindle bore. pallet width 330 mm. Spindle motor power 7.5 Kw. spindle speed 0 to 1,500 rpm. Total weight of 3 tons. Cnc CNC V2 1993 Notes COMPLETE: - N. 1 Ø 280 MM SELF.

Year:

Lathe CMT 250 Ursus hole 105 CNC self-learning vidue Capacity: 500x1500x105 mm FIELD OF WORK Distance between centers: 1500 mm Height of tips: 250 mm Maximum diameter on the bench: 500 mm Max diameter on the carriage: 290 mm Bar passage: 105 mm Used URSUS PLUS 250

Year: 1996

Year: 1995

Teach Inn Drehmaschine C.M.T. Typ: URSUS 250 plus Baujahr : 1995 Steuerung: C.M.T. Spitzen höhe: 250 mm Spitzen weite: 1.000 mm Zustand: Sehr schöne Drehbank!

Year:

SPECIFICATIONS Machinable diameter over bed 505 mm Machinable diameter above the cross slide 265 mm Machinable maximum length 1500 mm Race X 240 mm 1500 mm Travel Z Spindle speed of 15 to 1500 rev / min Number of lines 2 Spindle motor power 7,5 Kw Spindle nose C.L.8 " 105 mm spindle boring Rapid feed 5 m / min Type a turret Quick Change Type Manual tailstock The diameter of the sheath against tip 68 mm Quill stroke 220 …