Daewoo Puma 1500SY

Year: 2005

General Specifications As Per Brochure CNC Control: Fanuc 18i-TB Capacity: Swing Over Bed: 23.6" Swing Over Carriage: 21.7" Max. Bar Capacity: 1.8" Max. Turning Diameter (main spindle): 13" Max. Turning Length: 20.9" Main Spindle: Spindle Speed: 6000 RPM Spindle Nose: ASA A2-5 Spindle Bore Diameter: 2.1" Min. Programmable Angle: .001 degrees Y-Axis: Travel: 4"(+/-2") Rapid Traverse Rate: 296 IPM Bed,Saddle,Cross Slide: Travel (X/Z-Axis): 9.8"/22.8" Rapid Traverse Rate (X/Z-Axis): 788/945 IPM Turret: # of Tools: 12 Turning Tool Shank Size: 1" …

Year: 2004

Specifications: Maximum Swing Over Bed/Carriage 23.6"/21.6" Maximum Cutting Diameter 13" Maximum Distance Between Spindles 33.8" Maximum Bar Diameter 1.75" X Axis Travel 9.84" Z Axis Travel 22.8" Y Axis Travel +/- 1.97" B Axis Travel (Sub Spindle Stroke) 32.6" C Axis (Main/Sub Spindle) Positioning .001 Degree Chuck Size, Main/Sub 8"/6" Spindle Motor, Main/Sub 10 HP Spindle Speeds, Main/Sub 60-6,000 RPM Rotary Tool Spindle HP AC 7.5 HP Rotary Tool Spindle Speed 50 - 5,000 RPM Turret Positions 12 Machine (only) …

Year:

Make: Daewoo Model No.: Puma 1500SY Serial No.: P150SY0388 Condition: Very Good Comes with 2 X Collet Chuck, Tool Holders, Cool blaster, parts & Chip Conveyor All specifications are approximations, and are subject to verification. “One Our Floor, Fully powered / tested & in Good working condition. Only 14,867 cutting hours. Equipped with 2 Collet Chucks, Full C Axis, Milling, Sub Spindle and Y Axis. Comes with Parts & chip conveyor, live tool holders.” ——————————————————- Daewoo Puma 1500SY Equipped With: …

Year: 2002

Maximum Machining Diameter: 350mm Standard Machining Diameter: 255mm Maximum Machining Length: 550mm Maximum Bar Capacity: 45mm Z-axis Travel: 579mm X-axis Travel: 249mm Y-axis Travel: 100mm C-axis: 360.0000 Spindle Speeds: 60 ~ 6000rpm Tailstock Bore: MT No. Number of Turret Stations: 12 (12 driven) Maximum Driven Tool Speed: CNC System: Fanuc 18i-T Equipped with: FMB SL80L Magazine Bar Feed, Collet Chuck, Tool Setter, Turret Tools, Parts atcher, Tailstock

Year: 2004

2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis, INCLUCING: 3 X-Axis & 3 Z Axis Live tools(BMT55), ALL Static tool holders (BMT55), 3 Jaw Chucks for the Main and Sub spindle, 2006 IEMCA BOSS 551 Magazine Barfeeder, 1 set of guide channels that max out the bar capacity to 1 5/8 Round, Will run as small as 3/8" Diameter