Machine's specifications - Daewoo Puma 200 Used machines

Manufacturer	Daewoo
Model	Puma 200
Category	Lathes - cnc lathes

DAEWOO PUMA 200 MC CNC LATHE Sold

Year:

Swing over Saddle 330mm 8" Chuck 12 Station VDI Turret Tailstock : C Axis Live Tooling : Swarf Conveyor.

Price on request

United Kingdom

DAEWOO PUMA 200B CNC lathe Sold

Year: 1998

Price on request

Poland

Used DAEWO PUMA 200A Cnc lathe Sold

Year:

Price on request

Spain

Used Daewoo Puma 200C Cnc lathe Sold

Year: 1997

Max. Turning Diameter 8.3" Max. Turning Length 18.1" Bar Capacity 2.5" Spindle Speeds 45-4,500 RPM Spindle Motor 20 HP Turret Capacity 12 Station Approx. Weight 9,400 lbs Approx. Dimensions 106" x 64" x 69" Equipped With: Mitsubishi Meldas 500 Control 8" 3-Jaw SMW Autoblock Chuck 1997 SMW 6' Space Saver 2000 Magazine Type Barfeeder: Range Of Utilization 1/4" To 3-1/8" Bar Round Bar Diameter:3/8" - 2-1/2" Hexagonal Bar Capacity:3/8" - 2" Collet Chuck Tailstock Parts Catcher Tool Pre-Setter

Price on request

USA

Used DAEWOO PUMA 200S Cnc lathe Sold

Year:

Price on request

Italy

Daewoo Puma 200 C cnc lathe Sold

Year: 1998

MAKE Daewoo Korea TYPE PUMA 200 C YEAR 11.1998 SPECIFICATIONS Swing over bed Ø 510 mm Control Fanuc 18 T Swing over cross slide 330 mm Distance between centres 400 mm Spindle bore 76 mm Spindle speeds / ranges 4500 Rpm Power 15 Kw DIMENSIONS Length 2660 mm Width 1635 mm

Price on request

Switzerland

Daewoo Puma 220 MC cnc lathe Sold

Year: 2002

Specifications: Max. Turning diameter 300 mm dia. Turning Length 513 mm Mainspindle A2-6 Main motor power 11 kw Main Spindle speed Range 50-4500 rpm Boring trough drawing pipe 65 mm dia. C Axis 0.001 X Axis Stroke 240 mm Z Axis Stroke 580 mm Tool Turret capacity 12 stations Motorpower M spindle 3.7 Kw Live Tooling Spindle speeds 5000 rpm Control system FANUC 18T manuf. Controlled in 3 Axis Accessories: Parts Catcher Hydraulic Main centre chuck Kitagawa B-208 - dia …

Price on request

Denmark

Daewoo Puma 200 cnc lathe Sold

Year: 1998

Machine Type: CNC Lathes Year: 1998 Manufacturer: Daewoo Model: Puma 200 Control: Mitsubishi Meldas 520L Condition: Fair Under Power: No Specifications: Max Turning Diameter: 13.78? Max Turning Length: 15.75? Max Bar Capacity: 2.56? Swing Over Bed: 20.08? X Axis Travel: 9.53? Z Axis Travel: 17.32? Rapid Traverse X Axis: 787 IPM Rapid Traverse Z Axis: 1000 IPM Spindle Nose: A2-6 Spindle Bore: 2.99? Spindle Speed: 45 4500 RPM Spindle Motor:: 20 / 15 HP Turret Capacity: 12 Tools Turret …

Price on request

USA

Daewoo Puma 200 cnc lathe Sold

Year: 1998

Year: 1998. Measurements: 2.7 × 1.7 × 2 m. Theoretical weight: 3940 Kg. Capacity: ø200 x 700mm. Approximate working hours: 46,000 hours. FANUC 18-T series numerical control. Machine manual included. The machine is out of use. It can be programmed at the machine or transfer the programs by cable. Defects: -The grease pump is faulty. -Spindle movements using the handwheel can only be carried out in fast mode due to an electronic problem

Price on request

Spain

Daewoo PUMA 2000Y cnc lathe Sold

Year: 2003

Max turning dia 330 mm Max turning length 508 mm Travels x, y, z x: axis: 250mm, y: axis: +-51mm z: axis: 580mm, Bar capacity 66 mm Spindle speed 4,500 rpm Spindle nose a2-6 Turret 12 stations Tooling BMT 55 Programmable tailstock 120 mm Plus parts recuperator, swarf conveyor, 5 off live tools, 3 off static tools, new kitagawa bb-08 big bore chuck with cylinder, draw bar and tube very nice machine, well maintained,

Price on request

United Kingdom

Daewoo Puma P2000Y cnc lathe Sold

Year: 2002

CNC lathe Daewoo Puma P2000Y from year 2002 Fanuc Series 18i- T control Chip conveyor Programmable tailstock B- 210 handle Tool measurement with Tooleye User manuals available Driven Tools Machine weight 4750 kg The machine is still working, slow around mid-October 2019

Price on request

Germany

Used DAEWOO PUMA 200 Cnc lathe Sold

Year:

Price on request

France

DAEWOO PUMA 200C Sold

Year: 1998

Max Turning Diameter: 13.78″ Max Turning Length: 15.75″ Max Bar Capacity: 2.56″ Swing Over Bed: 20.08″ X Axis Travel: 9.53″ Z Axis Travel: 17.32″ Spindle Bore: 2.99″ Spindle Speed: 45 – 4500 RPM Spindle Motor: 20 hp Turret Capacity: 12 Stations Fanuc CNC Control Overall Dimensions: 105″ x 64″ x 69″ High Weight: 8800 lbs

Price on request

Mexico

Used Daewoo PUMA 2000Y Cnc lathe Sold

Year: 2006

Specifications: Control .............................................................. Fanuc 18iTB Max Bar Capacity ............................................................................ 2.6" Max Turn Diameter ............................................................................. 13" Max Swing Over Carriage .................................................................... 21.6" Max Turning Length ............................................................................. 21" Spindle Nose ...........................................................................A2-6 Spindle Bore ............................................................................... 3" Spindle Speed ................................................................ 5,000 RPM Spindle Motor ......................................................................... 20 HP Rotary Tool Motor ........................................................................ 7.5 HP Rotary Tool Speed ................................................................ 5,000 RPM Turret Stations ............................................................................... 12 X-Axis Travel ............................................................................ 9.8" Z-Axis Travel ............................................................................ 22.8 Y-Axis Travel .......................................................................... 3.94" Rapid Traverse Rates ..................................................... 790 X/ 945 Z IPM …

Price on request

USA

Daewoo PUMA 200 cnc lathe Sold

Year:

CNC Fanuc OT Turret 12 stations Spindle speed 4000 rpm Diameter over bed 500 mm Maximum machining length 508 mm Diam. Maximum machining 358 mm Bar passage 50mm X / Z 225 / 500mm travel 210 mm hydraulic chainring Preseting

Price on request

Spain

Doosan Puma QL 200HM cnc lathe Sold

Year: 2008

This Doosan Puma QL 200HM Lathe machine was manufactured in Korea in the year 2008. This 5 axis machine operates through a Fanuc 18iTB control unit. It incorporates a spindle speed up to 4500 rpm and a spindle power of 11/15 kW. Brand: Doosan Model: Puma QL 200HM Year of manufacture: 2008 Technical Information Control unit: Fanuc 18iTB Dimensions - Length: 3255 mm - Width: 1960 mm - Height: 3187 mm Weight: 5787 kg Spindle speed range: 4500 rpm Spindle …

Price on request

Italy

DAEWOO PUMA 200B Cnc lathe Sold

Year: 1998

Control: FANUC 18T Diam. Plate: 210 mm Diam. Torneable: 350mm Diam. over bed: 510 mm Long. Torneable: 400 mm Spindle speed: 50-5000 rpm Pot. Main Engine: 11/15 kW Tool changer: 12 Positions Bar capacity: 62 mm Includes: Probe Tool Includes: Chip Extractor

Price on request

Spain

DAEWOO PUMA 200LC Cnc lathe Sold

Year: 1999

Chuck Size 8" Max Diameter Bar Capacity 2.56" Max Swing Over Bed / Carriage 20.08" / 12.99" Max Turning Diameter / Std. 13.78" / 8.27" Distance Between Centers 20.8" Max Machining Length 15.75" Spindle Motor 20 / 15 HP Spindle Speed 45 - 4500 RPM Spindle Bore 2.99" Spindle Nose A2-6 Spindle Torque 188 ft. lbs. Tools 12 Rapid Traverse Rates (X / Z) 800 / 1000 IPM X-Axis Travel 9.53" Z-Axis Travel 17.32" Turret Index (Single Step) 0.15 Seconds …

Price on request

USA

Daewoo Puma 200 Sold

Year: 1998

Machine Type: CNC Lathes Year: 1998 Manufacturer: Daewoo Model: Puma 200 Control: Mitsubishi Meldas 520L Condition: Fair Under Power: No Specifications: Max Turning Diameter: 13.78? Max Turning Length: 15.75? Max Bar Capacity: 2.56? Swing Over Bed: 20.08? X Axis Travel: 9.53? Z Axis Travel: 17.32? Rapid Traverse X Axis: 787 IPM Rapid Traverse Z Axis: 1000 IPM Spindle Nose: A2-6 Spindle Bore: 2.99? Spindle Speed: 45 � 4500 RPM Spindle Motor:: 20 / 15 HP Turret Capacity: 12 Tools Turret …

Price on request

USA

Daewoo PUMA 200B cnc lathe Sold

Year: 1998

Controller: FANUC Series 18i-TB Number of axis total 3 Number of spindles 1 Number of revolvers 1 Swing in gap 330 mm Swing diameter over bed 510 mm Max. turning diameter 350 mm Maximum turning length 400 mm Turret carriage: Longitudinal travel (Z-axis) 440 mm Transversal strocke (X axis) 242 mm Rapid traverse Z 25 m/min Rapid traverse X 20 m/min Turret slide: Number of positions 12 Tool shank cross section 25 mm Main spindle: Inner taper type A2-6 Collet …

Price on request

Switzerland

Used Daewoo PUMA 200 C Sold

Year: 1999

Price on request

France

DAEWOO Puma 2000Y cnc lathe Sold

Year: 2002

Control Fanuc Series 18i-T Turning diameter 330 mm Turning length 510 mm Swing over bed 600 mm Swing diameter over slide rest 550 mm Bar material dia. 65 mm x-axis 250 mm z-axis 580 mm y-axis 100 mm Turning speeds max. 4500 U/min Spindle nose A2#6 Spindle bore 110 mm Turret 12 x Diameter of quill 80 mm Quill cone MK 4 Quill travel 120 mm Rapid traverse 7,5 - 24 m/min Main drive 15 (20) kW Total power requirement …

Price on request

Germany

Used Daewoo PUMA 2000Y cnc lathe Sold

Year: 2004

Year of construction 2004 Max. Turning diameter 330 mm Max. Turning length 510 mm Max. Turning diameter from bar 65 mm Y axis Stroke 100 mm (+/- 50) Mandrel [Counter-spindle] Attack ASA 6 45/4500 rpm rotation speed Engine power AC (cont./30min.) KW 11/15 Torretta Number of tools (motorizable) nr. 12 Motorized power kW / 30min. 3.7 No. of tools nr. 12 Fanuc 18i-TB control 2 motorized radial tool holders 2 axial motorized tool holders

Price on request

Italy

Used Daewoo Puma 200-LC. Cnc Lathe, w/ Fanuc 21-T Control Sold

Year: 1999

Specifications Chuck 8" Kitagawa 3-Jaw Hydraulic Bar Capacity 2.5" Turning Diameter 11" Centers 25" Turret 12 Station Swing Over Saddle 13.7" Motor 20 HP X-Axis Travel 9.5" Z-Axis Travel 27.5" Equipped with Fanuc 21-T Control Tailstock Quill Taper MT #4 Tailstock Quill Diameter 2.6" Tailstock Quill Stroke 3.1" Programmable Tailstock Barfeed Interface Tool Presetter Box Ways SMW Spacesaver Barfeeder Chip Conveyor

Price on request

USA

Tour CNC d'occasion Daewoo Puma 200 MA Sold

Year: 1998

Diamètre mandrin: 160 mm Diamètre en barre: 45 mm Axe C Outil Tournant Récupérateur de pièces

Price on request

France

Used Daewoo Puma 200C-GL Lathe Sold

Year: 1999

Price on request

USA

Daewoo PUMA 200 CNC Lathe Sold

Year:

Daewoo PUMA 200 CNC Lathe 510mm Swing 340max. machining diameter 528mm between centres 64mm bar capacity 3500rpm spindle 10 station turret 18.5kW spindle motor FANUC OT control 204mm 3 jaw power chuck tool pre-setter swarf conveyor parts catcher tailstock(1998)

Price on request

United Kingdom

Daewoo PUMA 2000Y cnc lathe Sold

Year: 2002

DAEWOO turning center, 2002. PUMA 2000Y model, + C / Y axis / FANUC 18i-T Control driven tools, operating range: turning diameter 330mm turning diameter over the bed 600 / 550mm turning length 510mm axis travels "X" = 250 mm, "Z" = 580 mm, "Y" = 100 mm ± 50 mm, rod turning Ø65mm spindle passage Ø76mm main spindle speed 4500rpm, 20kw 12ATC tool magazine turnover nap. tools 6000rpm, 3.7kw probe, detail catcher, chip conveyor, 3-jaw hydraulic chuck + other …

Price on request

Poland

Daewoo Puma 200 Sold

Year: 1998

Condition: Used-Very Good Detailed Description: 1998 Daewoo Puma 200 Turning Center Control: Mitsubishi Meldas 500L MACHINE SPECIFICATIONS Max Swing 20.1" (510mm) Max Turning Diameter 13.4" (335mm) Max Turning Length 16.1" (405mm) Turret Positions 12 Bar Capacity 2.5" (55mm) Spindle Speeds To 4,500 RPM Spindle Motor 20 HP (14.91kW) Equipment & Features: 8" 3-Jaw Hyd. Chuck, Tailstock, Parts Catcher, Chip Conveyor, Toolsetter, Coolant System

Price on request

USA

Used CNC lathe Daewoo Puma 200 Sold

Year:

Control: Mitsubishi Meldas 520L Condition: Good Under Power: Yes CAPACITY: Swing Over Bed: 20.1" Swing Over C.S.: 13" Z-Longitudinal: 16.7" Max.Mach.Diam: 13.8" SPINDLE: Bar Capacity: 2.5" Equipped With: 8" Kitagawa 3-jaw chuck SMW SPACESAVER 2100 bar feeder Assorted Spindle Liners Assorted Collets Mitsubishi Meldas 520L Tailstock Comments: In Plant, Under Power

Price on request

USA

Tour CNC DAEWOO PUMA 200 d'occasion Sold

Year: 1998

-12 outils VDI 40 -Puissance à installer 7,5/11 Kw -Course X 242 mm -Course Z 440 mm -Diamètre fourreau 75 mm -Course fourreau 80 mm -Avance rapide axe X 20 m/mn -Avance rapide axe Z 25 m/mn mandrin diamètre 165 porte pinces convoyeur à copeaux palpeur outils nombreux outillages arrosage haute pression

Price on request

France

Used DAEWOO PUMA 200C Cnc lathe, 8" Chk, 2.5" HOLE, 20.1" SWING, 20.8" CENTERS Sold

Year: 1998

SPECIFICATIONS CONTROL: FANUC 18T SWING OVER CARRIAGE: 13" SWING OVER BED: 20.1" X-AXIS TRAVEL: 9.3" Z-AXIS TRAVEL: 16.9" RAPID TRAVERSE RATES: 800 IPM X/ 1000 IPM Z CHUCK SIZE: 8" MAX BAR CAPACITY: 2.5" DIST. BETWEEN CENTERS: 20.8" MAX TURNING DIA: 13.4" MAX TURNING LENGTH: 15.7" SPINDLE SPEEDS: 45-4,500 RPM SPINDLE TORQUE: 188 FT LBS SPINDLE MOTOR: 20 HP SPINDLE BORE: 2.99" DRAW TUBE BORE: 2.56" TAILSTOCK TAPER: MT#4 TAILSTOCK TRAVEL: 3.1" TURRET STATIONS: 12 MACHINE DIMENSIONS: 110" LENGTH X …

Price on request

USA

Used Daewoo, Model Puma 200. CNC Turning Center, w/ Mitsubishi 520L CNC Control Sold

Year: 1997

Specifications Chuck: 8" Bar Capacity: 2.5" Max. Swing Over Bed: 20.1" Swing Over Saddle: 13" X-Axis Travel: 9.5" Z-Axis Travel: 17.3" X-Axis Rapid Traverse Rate: 800 IPM Z-Axis Rapid Traverse Rate: 1,000 IPM Spindle Motor: 20 HP Turret Capacity: 12-Station Turret Tailstock Quill Taper: MT #4 Tailstock Quill Diameter: 3" **** EQUIPPED WITH: Mitsubishi 520L CNC Control 8" 3-Jaw Hydraulic Chuck Tool Setter 12-Station Turret Tailstock Chip Conveyor All Available Toolholders All Available Manuals

Price on request

USA

Used CNC lathe Daewoo Puma 200C Sold

Year: 1998

Used CNC lathe Daewoo Puma 200C Max. machining diameter of 340mm 408mm between centers Max diameter of workpiece 510mm Diameter of the rod 65 mm Chuck ........................ 8 "(203mm) FANUC 18T Control Rotating head ........................ 10 items Spindle ........................ 3500 rpm Spindle power 15kW Pinole programmable Equipped with: chip conveyor, detail measuring device, cooling system, tailstock, secure lock, 3 jaw chuck, capturing device

Price on request

Poland

Daewoo Puma 200-B CNC Lathe Sold

Year: 1999

Maximum Turning Diameter Ø mm 350 Standard Mirror Size inch 400 Bar Capacity Ø mm 65 Spindle Speed 4500 rpm 20 kw Spindle Motor Set Stations (ad) 12 X Axis Travel mm 242 Z Axis Stroke mm 440 Rapid rate (X & Z) m / min 20 & 25 Control Unit Fanuc 18T Chip Conveyor Available Automatic Lubrication System Available • The hydraulic chuck

Price on request

Unknown country

DAEWOO Puma 200B Cnc lathe Sold

Year: 1998

CNC:Fanuc 18T Chuck diameter:210 mm Turning diameter:350 mm Diameter over bed:510 mm Turning length:400 mm Spindle speed:50-5000 rpm Main motor power:11/15 kW Stations turret:12 Spindle bore:62 mm Total working hours:8,916 Rapid feeds:(X,Z): 20-25 m/min Additional information: Tool presetter, swarf conveyor Weight of the machine:3,940 Kg

Price on request

Spain

DAEWOO PUMA 200B cnc lathe Sold

Year: 1998

Catalog No. : 2006 Type: PUMA 200B Producer: DAEWOO Made in: 1998 Characteristic: System: FANUC Turning over Bed: 350 mm To a bar capacity of: 52 mm Chuck ø : 210 mm Machine weight: 3940 kg Accessories: jaws + tool holder; chip conveyor

Price on request

Czech Republic

Daewoo Puma 200C cnc lathe Sold

Year: 1998

1998 DAEWOO PUMA 200C SPECIFICATIONS: Swing Over Bed 21” Max Turning Length 15.75” Max Turning Diameter 13.78” Distance Between Centers 20.8” X-Axis Travel 9.53” Z-Axis Travel 17.32” Spindle Speed 4500 RPM Spindle Bore / Bar Capacity 2.99”/ 2.56” Spindle Motor 20/15 HP Spindle Nose A2-6 Turret Stations 10 Machine Dimensions (L x W x H) 104.7” x 64.4” x 68.5” Machine Weight 9010 LBS EQUIPPED WITH: Mitsubishi CNC Control 8” 3 Jaw Chuck Tool Pre-setter and Parts Catcher are not …

Price on request

USA

Used DAEWOO Puma 200 cnc lathe Sold

Year: 1999

Year of construction: 1999 Control: Fanuc 18-T Rotation diameter on the pallet: 510 mm Diameter on cross slide: 330 mm Axis x: 210 mm Z axis: 550 mm spindle hole: 76 mm Motor power: 35 KW 100% ED Speed range from - to: 45-4500 rpm Axes: 2 Tower: 12 stations Locking device Automatic tailstock Chip conveyor SMW Autoblock three-jaw chuck: 210 mm

Price on request

Italy

Daewoo PUMA 200B cnc lathe Sold

Year: 1998

Control: FANUC O-T Series Diam. Plate: 210 mm Diam. Tournable: 350mm Diam. on the bench: 510 mm Long. Tounable: 400 mm Head speed: 50-5000 r.p.m. Pot. Main motor: 11/15 kW Tool Changer: 12 Positions Bar step: 62 mm Incorporates: Tool probe Incorporates: Chip extractor Incorporates: Bar feeder

Price on request

Spain

Daewoo Puma 200 cnc lathe Sold

Year: 1998

1998 model Daewoo Puma 200 8 İnç Fanuc control

Price on request

Turkey

Daewoo PUMA 2000Y cnc lathe Sold

Year:

DOOSAN CNC turning center, model PUMA 2000Y, 4-axis, C axis, Y axis, FANUC SERIES 18i-TB Control, driven tools, tailstock, turning diameter 330/550mm, turning length 500mm through spindle 76mm, 3500/6000rpm , 22/15kw, probe, chip conveyor, 12ATC magazine, dimensions 3900 x 2000 x 2200mm, weight 4850kg

Price on request

Poland

Daewoo PUMA 2000Y cnc lathe Sold

Year:

DOOSAN CNC turning center, model PUMA 2000Y, 4-axis, C axis, Y axis, FANUC SERIES 18i-TB Control, driven tools, tailstock, turning diameter 330/550mm, turning length 500mm through spindle 76mm, 3500/6000rpm , 22/15kw, probe, chip conveyor, 12ATC magazine, dimensions 3900 x 2000 x 2200mm, weight 4850kg

Price on request

Poland

Used DAEWOO PUMA 200LC Cnc lathe Sold

Year: 1998

Price on request

Italy

Daewoo Puma 200

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?

Turning length	510 mm
Turning Ø	350 mm
Ø above the bed	510 mm
Ø above transversing slide	330 mm
Length between centers	400 mm
Type of CNC	FANUC 18T
X-axis	250 mm
Z-axis	580 mm
Spindle taper	A2-6
Spindle bore	76 mm
Number of turrets	1
Number of tools on turret	12
Number of rotating tools	6
Turning speed	4500 rpm
Spindle motor power	15 kW
Tailstock	no
Bar feeder	no
-------------------
Length x width x height	3683.0 × 1574.8 × 1752.6
Weight	3940 kg