Manufacturer | Demag |
---|---|
Model | Ergotech-System 150-610 NC4 |
Category | Injection moulding machines |
Clamping force | 150 T |
Screw diameter | 50 mm |
Tie bar spacing (H) | 500 mm |
Tie bar spacing (V) | 500 mm |
Shot volume | 399 cm³ |
Shot weight | 360 g |
Pressure on material | 1598 bar |
Platen length | 770 mm |
Platen width | 770 mm |
Robot interface | |
Number of cores | 2 |
Opening of the press | 500 mm |
Mould size | |
------------------- | |
Length x width x height | 5200.0 × 1600.0 × 2100.0 |
Weight | 6700 kg |
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
Year: 2001
Year: 2001 Injection Unit: .../500-610 Screw diameter: 45 mm Injection pressure: 1973 bar Injection volume: 323 ccm Shot capacity: 288 g Clamping Unit: 150/... Clamping force: 150 t Platen size: 750 x 800 mm Distance between tie bars: 500 x 500 mm Mould height: 250...560 mm Opening storke: 500 mm Max.Daylight: 1060 mm Ejector stroke: 160 mm Drive power of the hydraulic pump: 22 kW Cylinder heating power: 13 kW General information: Delivery time: Now Machine dimensions(m) LxWxH: 5,2 x …Price on request
Poland
Year: 1997
TECHNICAL DATA Closing force: 1500 kN Clearance between columns: 500 mm x 500 mm Dimensions of discs: 750 mm x 750 mm Form size: min 250 mm max 560 mm Opening Path: 500 mm Snail: 45 mm Injection volume: 323 ccm Injection pressure: 1970 bar GENERAL Engine: 22 kW heater: 13 kW Hours: dimensions: 5.2 mx 1.6 mx 2 m Weight: 6000 kgPrice on request
Poland
Year:
Price on request
Germany
Year: 1999
Clamping unit Clamping force80 ton Opening stroke700 mm Distance between tie bars400 x 400 mm Mould height min.250 mm Mould height max.500 mm Injection unit Screw diameter35 mm Injection volume168 cm³ Shot weight151 g Injection pressure2024 bar Measurements and weight Dimensions3,9 x 1,4 x 1,85 m Machine weight3700 kgPrice on request
Germany
Year: 2000
Clamping unit Clamping force80 ton Opening stroke700 mm Distance between tie bars400 x 400 mm Mould height min.250 mm Mould height max.500 mm Injection unit Screw diameter30 mm Injection volume105 cm³ Shot weight95 g Injection pressure2400 bar Measurements and weight Dimensions3,9 x 1,4 x 1,85 m Machine weight4200 kgPrice on request
Germany
Year: 2000
brand DEMAG Type ERGOtech system 800-310 NC4 Year 2000 closing unit Closing force 80 ton Opening travel 700 mm Holmmass (hxv) 400 x 400 mm Installation height min. 250 mm Installation height max. 500 mm injection unit Screw diameter 30 mm Spray volume 105 cm³ Spray weight PS 95 gr Injection pressure 2400 bar mass and weight Dimensions LxWxH 3.9 x 1.4 x 1.85 m Machine weight 3700 kgPrice on request
Germany
Year: 1999
Price on request
Germany
Year: 1999
brand DEMAG Type ERGOtech system 800-310 NC4 Year 1999 closing unit Closing force 80 ton Opening path 700 mm Beam dimension (h x v) 400 x 400 mm Installation height min. 250 mm Installation height max. 500 mm injection unit Screw diameter 35 mm Spray volume 168 cm³ Injection weight PS 151 gr Spray pressure 2024 bar mass and weight Dimensions LxWxH 3.9 x 1.4 x 1.85 m Machine weight 3700 kgPrice on request
Germany
Year: 1999
brand DEMAG Type ERGOtech system 800-310 NC4 Year 1999 closing unit Closing force 80 ton Opening path 700 mm Beam dimension (h x v) 400 x 400 mm Installation height min. 250 mm Installation height max. 500 mm injection unit Screw diameter 35 mm Spray volume 168 cm³ Injection weight PS 151 gr Spray pressure 2024 bar mass and weight Dimensions LxWxH 3.9 x 1.4 x 1.85 m Machine weight 3700 kgPrice on request
Germany
Year: 1998
Brand KRAUSS MAFFEI Type KM 350-1900 C1 MC4 year of manufacture 2006 Clamping unit Clamping force 350 ton opening stroke 920 mm Beam dimension (h x v) 710 x 710 mm Installation height min. 380 mm Platen size (h x v) 1060 x 1095 mm Injection unit Screw diameter 60 mm Injection volume 769 cm³ Injection weight PS 700 gr Injection pressure 2420 bar Dimensions and weights Dimensions LxWxH 6.6 x 2.1 x 2.4 m Machine weight 15370 kgPrice on request
Germany
Year: 1998
Brand DEMAG type Ergotech-System 1500-610 year of manufacture 1998 Clamping unit clamping force 150 ton opening stroke 500 mm Beam dimension (h x v) 500 x 500 mm Installation height min. 250 mm Installation height max. 560 mm Platen size (h x v) 750 x 750 mm Injection unit Screw diameter 50 mm Injection volume 399 cm³ Injection weight PS 360 gr Injection pressure 1598 bar Dimensions and weights Dimensions LxWxH 5.2 x 1.65 x 2.2 m Machine weight 7000 …Price on request
Germany
Year: 2001
Year: 2001 Injection unit: ... / 610 Screw diameter: 45 mm Specific injection pressure: 1973 bar Injection volume: 323 ccm Shot weight: 288 g Tool locking system: 150 / ... Closing force: 150 t Tool plate dimensions: 750 x 750 mm Clearance between columns: 500 x 500 mm Tool height: 250 ... 560 mm Opening distance: 500 mm Max. Distance of the plates: 1060 mm Ejector stroke: 160 mm General information: Pickup Date: Immediately Dimensions (m) LxWxH: 5.2 x 1.6 …Price on request
Poland
Year: 1999
Manufacturer: DEMAG Type: Ergotech 150-610 NC4 Year of construction: 1999 closing unit Closing force: tone 150 Opening stroke: mm 500 Holmmass: mm 500 x 500 Installation height min / max: mm 250 / Plate size: mm 770 x 770 injection unit Screw diameter: mm 50 Spray volume: cm³ 399 Spray weight: gr 360 Spray pressure: bar 1598 mass and weight Dimensions LxWxH: m 5.2 x 1.6 x 2.1 Machine weight: kg 6700 Extras - 1 air valvePrice on request
Germany
Year: 1999
brand DEMAG Type Ergotech system 150-610 NC4 Year 1999 closing unit Closing force 150 ton Opening travel 500 mm Holmmass (h x v) 500 x 500 mm Installation height min. 250 mm Plate size (h x v) 770 x 770 mm injection unit Screw diameter 50 mm Spray volume 399 cm³ Spray weight PS 360 gr Injection pressure 1598 bar mass and weight Dimensions LxWxH 5.2 x 1.6 x 2.1 m Machine weight 6700 KgPrice on request
Germany
Year: 1997
This DEMAG Ergotech 150-610 NC 4 was manufactured in 1997. A robust injection moulding machine featuring a closing force of 1500 kN and a locking force of 1650 kN. It includes a functioning linear robot Wittmann, enhancing operational efficiency. Ideal for those seeking a reliable machine with significant force capabilities. For more information about this injection moulding machine, please reach out to us. Max weight: 1700 kg Mould height min: 250 Functioning linear robot Wittmann Locking force: 1650 kN Opening …Price on request
Germany
Year: 2001
Demag Ergotech 150 / 500-610 Year: 2001 Injection unit: ... / 500-610 Screw diameter: 45 mm Specific injection pressure: 1973 bar Injection volume: 323 ccm Shot weight: 288 g Tool locking system: 150 / ... Closing force: 150 t Tool plate dimensions: 750 x 800 mm Clearance between columns: 500 x 500 mm Tool height: 250 ... 560 mm Opening distance: 500 mm Max. Distance of the plates: 1060 mm Ejector stroke: 160 mm Pump motor power: 22 kW Power …Price on request
Poland
Year: 1998
Brand DEMAG type Ergotech-System 1500-610 year of manufacture 1998 Clamping unit clamping force 150 ton opening stroke 500 mm Beam dimension (h x v) 500 x 500 mm Installation height min. 250 mm Installation height max. 560 mm Platen size (h x v) 750 x 750 mm Injection unit Screw diameter 50 mm Injection volume 399 cm³ Injection weight PS 360 gr Injection pressure 1598 bar Dimensions and weights Dimensions LxWxH 5.2 x 1.65 x 2.2 m Machine weight 7000 …Price on request
Germany
Year: 1994
Diamétre de vis : 45 mm Poids injectable : 290 g Passage entre colonne : 500 x 500 mmPrice on request
France
Year: 1999
DEMAG brand Type ERGOtech system 800-310 NC4 Year of manufacture 1999 Clamping unit Closing force 80 ton Opening path 700 mm Side dimensions (h x v) 400 x 400 mm Installation height min. 250 mm Installation height max. 500 mm Injection unit Screw diameter 35 mm Injection volume 168 cm³ Injection weight PS 151 gr Injection pressure 2024 bar mass and weight Dimensions LxWxH 3.9 x 1.4 x 1.85 m Machine weight 3700 kg Additional information & extras Robot interface …Price on request
Germany
Year: 1995
Closing force 80 tons The diameter of the screw 30 mm Robot connector Closing and injection side - new seals 21kW powerPrice on request
Poland
Year: 1999
Manufacturer: DEMAG Type: Ergotech System 150-610 NC4 Year of construction: 1999 closing unit Closing force: tone 150 Opening stroke: mm 500 Holmmass: mm 500 x 500 Installation height min / max: mm 250 / Plate size: mm 770 x 770 injection unit Screw diameter: mm 50 Spray volume: cm³ 399 Spray weight: gr 360 Spray pressure: bar 1598 mass and weight Dimensions LxWxH: m 5.2 x 1.6 x 2.1 Machine weight: kg 6700 Extras - 1 air valve - 2 …Price on request
Germany
Year: 1999
Manufacturer: DEMAG Type: Ergotech System 150-610 NC4 Year of construction: 1999 closing unit Closing force: tone 150 Opening stroke: mm 500 Holmmass: mm 500 x 500 Installation height min / max: mm 250 / Plate size: mm 770 x 770 injection unit Screw diameter: mm 50 Spray volume: cm³ 399 Spray weight: gr 360 Spray pressure: bar 1598 mass and weight Dimensions LxWxH: m 5.2 x 1.6 x 2.1 Machine weight: kg 6700 Extras - 1 air valve - 2 …Price on request
Germany
Year: 1999
brand DEMAG Type Ergotech system 150-610 NC4 Year 1999 closing unit Closing force 150 ton Opening travel 500 mm Holmmass (h x v) 500 x 500 mm Installation height min. 250 mm Plate size (h x v) 770 x 770 mm injection unit Screw diameter 50 mm Spray volume 399 cm³ Spray weight PS 360 gr Injection pressure 1598 bar mass and weight Dimensions LxWxH 5.2 x 1.6 x 2.1 m Machine weight 6700 KgPrice on request
Germany
Year: 1999
brand DEMAG Type Ergotech system 150-610 NC4 Year 1999 closing unit Closing force 150 ton Opening path 500 mm Beam dimension (h x v) 500 x 500 mm Installation height min. 250 mm Plate size (h x v) 770 x 770 mm injection unit Screw diameter 50 mm Spray volume 399 cm³ Injection weight PS 360 gr Spray pressure 1598 bar mass and weight Dimensions LxWxH 5.2 x 1.6 x 2.1 m Machine weight 6700 kgPrice on request
Germany
Year: 1999
brand DEMAG Type Ergotech system 150-610 NC4 Year 1999 closing unit Closing force 150 ton Opening path 500 mm Beam dimension (h x v) 500 x 500 mm Installation height min. 250 mm Plate size (h x v) 770 x 770 mm injection unit Screw diameter 50 mm Spray volume 399 cm³ Injection weight PS 360 gr Spray pressure 1598 bar mass and weight Dimensions LxWxH 5.5 x 1.6 x 2.2 m Machine weight 6700 kgPrice on request
Germany
Year:
Category: Injection Moulding Manufacturer: Demag Model: 1500-610 Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Screw Diameter (mm): 45mm Max Shot Weight (PS) (g): 290 Control System: NC4 Controller Lead Time: Immediate Hours: circa, 44000 In Production: Yes Currently undergoing refurbishment at our works is a Demag Ergotech 1500-610 (150T) Compact. Fitted with the NC4 controller with the centre rotary wheel. A good specification machine with double core pull circuits, circa 44k run hours. Demag machines are well …Price on request
United Kingdom
Year: 1999
Make Demag ergotech Type 1250-610 Year of manufacture 1999 Screw diameter 45 mm Injection weight in Polysterol 149 g / PS Closing force 1250 kNPrice on request
Germany