Machine's specifications - Demag ERGOtech 500-200 NC4 Used machines

Manufacturer	Demag
Model	ERGOtech 500-200 NC4
Category	Injection moulding machines

Demag Ergotech 2000-840 System NC4 Injection moulding machine Sold

Year: 2002

Demag Ergotech 2000-840 System NC4 Injection moulding machine

Price on request

Germany

Demag Ergotech 50-200 Sold

Year: 1994

Clamping force: 50 t Tool height: 210 mm Opening distance: 400 mm Platten dimensions: 520 x 520 mm Clearance between tie bars: 355 x 355 mm Screw diameter: 30 mm Specific injection pressure: 1990 bar Injection volume: 106 cm3 Shot weight: 94 g Dimensions(m) LxWxH: 3.7m x 1.4m x 1.8m Weight: 2900 kg Condition: working

Price on request

Slovakia

Injection Moulding Machine DEMAG ErgoTech 50-200 Sold

Year: 1995

Model: ErgoTech 50-200 Clamp Force: 50 (Tonnes) Screw Diameter: 25 (mm) Shot Weight: 54 (PS)(g) Year: 1995 In excellent condition. Single core pull. Hot air dryer included in price. Viewing in dry-cycle operation only Cleaned and tested In excellent condition for its age, this machine has been well maintained. The hours are unavailable due to a component replacement but the machinery has been tested and cleaned. Fitted with the middle injection unit in the range this is an all round …

Price on request

United Kingdom

Used DEMAG 420T ERGOTECH SYSTEM 4200-2300 Injection moulding machine Sold

Year:

Price on request

France

Used DEMAG 420T ERGOTECH SYSTEM 4200-2300 Injection moulding machine Sold

Year: 1996

Price on request

France

DEMAG 1100 - 200 NC4 ERGOTECH SYSTEM Injection moulding machine Sold

Year: 1998

Year 1998 Clamp Force: 110 Shot Weight: 94 Tie Bar Spacing 450 X 450 mm

Price on request

United Kingdom

Demag Ergotech 50-200 Injection moulding machine Sold

Year: 1993

Clamping force t:50 Opening stroke mm: 400 Distance between tie bars mm:320 x 320 Installation height min/max mm: 210 Mould fixing platen size h x v:530 x 540

Price on request

Germany

Demag 1100 - 200 NC4 ERGOTECH SYSTEM Injection moulding machine Sold

Year: 1998

Locking Force: 110 ton Screw Dia: 35mm Air Circuits: 1 Pump Hours : 38892 Print Journal Robot Interface : Euromap 12 Volts: 400 / 50 Hz Fully refurbished pump EUROMAP : 1100 200 YEAR OF MANUFACTURE : 1998 CLAMPING FORCE : 110 TON SCREW DIAMETER : 35 MM SHOT WEIGHT (P/S) : 128 GR CALCULATED INJECTION VOLUME : 144 CM 3 INJECTION PRESSURE : 1400 BAR PLATEN SIZES : 670 X 670 MM D.B.T.B. : 450 X 450 MM …

Price on request

United Kingdom

Demag Ergotech 80-310 NC4 Injection moulding machine Sold

Year: 1998

Press in review Estimated delivery 15/05/2015

Price on request

Italy

Demag Ergotech 500-200 Injection moulding machine Sold

Year: 1996

TECHNICAL DATA Closing force: 500 kN Clearance between columns: 355 x 355 mm Panel size: 520 x 520 mm The size of the form: 210 mm Road Open: Snail: 30 mm Injection volume: 106 cc 94 grams (PS) Injection pressure: 1990 bar GENERAL Engine: 18 kW heaters: 8 kW dimensions: 3.6 x 1.4 x 1.8 m Weight: 2 900 kg

Price on request

Poland

Demag Ergotech 2000-840 System NC4 Injection moulding machine Sold

Year: 1994

Demag ET 2000-840 NC4 system Year of production 1994 Over 59 000 hours Closing force 200 tons Distance between 560x560 columns Injection volume 358 ccm

Price on request

Slovakia

Demag Ergotech System 500-200 NC4 Injection moulding machine Sold

Year: 1999

Manufacturer: DEMAG Type: Ergotech System 500-200 NC4 Year of construction: 1999 closing unit Closing force: tone 50 Opening travel: mm 610 Holmmass: mm 355 x 355 Installation height min / max: mm 210/410 injection unit Screw diameter: mm 22 Spray volume: cm³ 40 Spray weight: gr 36 Spray pressure: bar 2400 mass and weight Dimensions LxWxH: m 3.7 x 1.5 x 1.8 Machine weight: kg 3100

Price on request

Germany

Demag Ergotech System 500-200 NC4 Injection moulding machine Sold

Year: 1999

Manufacturer: DEMAG Type: Ergotech System 500-200 NC4 Year of construction: 1999 closing unit Closing force: tone 50 Opening travel: mm 610 Holmmass: mm 355 x 355 Installation height min / max: mm 210/410 injection unit Screw diameter: mm 22 Spray volume: cm³ 40 Spray weight: gr 36 Spray pressure: bar 2400 mass and weight Dimensions LxWxH: m 3.7 x 1.5 x 1.8 Machine weight: kg 3100

Price on request

Germany

Demag ERGOtech system 500-200 NC4 Injection moulding machine Sold

Year: 1997

Clamping unit Clamping force50 ton Opening stroke610 mm Distance between tie bars355 x 355 mm Mould height min.210 mm Mould height max.410 mm Injection unit Screw diameter25 mm Injection volume74 cm³ Shot weight67 g Injection pressure2400 bar Measurements and weight Dimensions3,55 x 1,35 x 1,8 m Machine weight3200 kg

Price on request

Germany

Demag ERGOtech system 500-200 NC4 Injection moulding machine Sold

Year: 1997

Clamping unit Clamping force50 ton Opening stroke610 mm Distance between tie bars355 x 355 mm Mould height min.210 mm Mould height max.410 mm Injection unit Screw diameter30 mm Injection volume105 cm³ Shot weight95 g Injection pressure1995 bar Measurements and weight Dimensions3,55 x 1,35 x 1,8 m Machine weight3200 kg

Price on request

Germany

Demag ERGOtech system 500-200 NC4 Injection moulding machine Sold

Year: 1997

brand DEMAG Type ERGOtech system 500-200 NC4 Year 1997 closing unit Closing force 50 ton Opening travel 610 mm Holmmass (h x v) 355 x 355 mm Installation height min. 210 mm Installation height max. 410 mm injection unit Screw diameter 30 mm Spray volume 105 cm³ Spray weight PS 95 gr Injection pressure 1995 bar mass and weight Dimension LxWxH 3.8 x 1.6 x 2 m Machine weight 3200 Kg

Price on request

Germany

Demag ERGOtech system 500-200 NC4 Injection moulding machine Sold

Year: 1997

brand DEMAG Type ERGOtech system 500-200 NC4 Year 1997 closing unit Closing force 50 ton Opening travel 610 mm Holmmass (h x v) 355 x 355 mm Installation height min. 210 mm Installation height max. 410 mm injection unit Screw diameter 25 mm Spray volume 74 cm³ Spray weight PS 67 gr Injection pressure 2400 bar mass and weight Dimension LxWxH 3.8 x 1.6 x 2.0 m Machine weight 3200 Kg

Price on request

Germany

Demag ERGOtech system 500-200 NC4 Injection moulding machine Sold

Year: 1997

brand DEMAG Type ERGOtech system 500-200 NC4 Year 1997 closing unit Closing force 50 ton Opening travel 610 mm Holmmass (h x v) 355 x 355 mm Installation height min. 210 mm Installation height max. 410 mm injection unit Screw diameter 30 mm Spray volume 105 cm³ Spray weight PS 95 gr Injection pressure 1995 bar mass and weight Dimension LxWxH 3.8 x 1.6 x 2.0 m Machine weight 3200 Kg

Price on request

Germany

Demag ERGOtech system 500-200 NC4 Injection moulding machine Sold

Year: 1997

brand DEMAG Type ERGOtech system 500-200 NC4 Year 1997 closing unit Closing force 50 ton Opening path 610 mm Beam dimension (h x v) 355 x 355 mm Installation height min. 210 mm Installation height max. 410 mm injection unit Screw diameter 30 mm Spray volume 105 cm³ Injection weight PS 95 gr Spray pressure 1995 bar mass and weight Dimensions LxWxH 3.8 x 1.6 x 2.0 m Machine weight 3200 kg

Price on request

Germany

Demag ERGOtech system 500-200 NC4 Injection moulding machine Sold

Year: 1997

DEMAG brand Type ERGOtech system 500-200 NC4 Year of manufacture 1997 Clamping unit Closing force 50 ton Opening path 610 mm Side dimensions (h x v) 355 x 355 mm Installation height min. 210 mm Installation height max. 410 mm Injection unit Screw diameter 30 mm Injection volume 105 cm³ Injection weight PS 95 gr Injection pressure 1995 bar mass and weight Dimensions LxWxH 3.8 x 1.6 x 2.0 m Machine weight 3200 kg

Price on request

Germany

Used DEMAG Ergotech viva 2000-610 Injection moulding machine Sold

Year: 1999

Brand DEMAG type Ergotech viva 2000-610 year of manufacture 1999 Clamping unit clamping force 200 ton opening stroke 575 mm beam dimension (h x v) 560 x 560 mm Installation height min. 310 mm Installation height max. 660 mm Platen size (h x v) 830 x 830 mm Injection unit Screw diameter 45 mm Injection volume 323 cm³ Injection weight PS 290 gr Injection pressure 1973 bar Dimensions and weights Dimensions LxWxH 5,7 x 1,7 x 2,1 m Machine weight …

Price on request

Germany

DEMAG Ergotech 500-5200 Injection moulding machine Sold

Year: 1998

Demag et 500/5200 injection machine + equipment Robot sepro sr4040 visual control Robot discharge belt Safety cage area unloads the robot on a belt Dehumidifier sb mod. Db / n-320 with feeder Tool-tem mold tempering mod. Tt-168 Tool-tem mold tempering mod. Tt-168 16 hot chamber control zones in the mold 12 control of 12 sequential injection valves Material feeder to the machine Two core movable plate Movable plate air valve In-mold ejection option Color dispenser

Price on request

Spain

Demag Ergotech 500-200 System NC4 Injection moulding machine Sold

Year: 1995

Demag Ergotech 500-200 System NC4 Injection moulding machine

Price on request

Germany

Demag Ergotech 50/320-200 Injection moulding machine Sold

Year: 2000

brand: Demag model: Ergotech 50/320-200 year: 2000

Price on request

Italy

DEMAG Ergotech 2000-610 NC4 Injection moulding machine Sold

Year: 1998

clamping force ton 200 opening Stroke mm 575 distance between tie bars mm 560 x 560 mould height min/max mm 310 / 660 size of mould plates mm 830 x 830 Injection unit screw diameter mm 45 injection volume cm³ 323 shot capacity gr 290 injection pressure bar 1973

Price on request

Germany

Demag Ergotech NC4 50-200 Injection moulding machine Sold

Year: 2001

Clamping force 50T Step columns 320 x 320 mm Screw diameter 30 mm Volume injection 106 cc Specific pressure 1900 bar Variable capacity pump

Price on request

Italy

Demag Ergotech 50-200 Injection moulding machine Sold

Year: 2004

Demag Ergotech 50-200 Year: 2004 Control: NC4 Injection unit: .../200 Screw diameter: 25 mm Specific injection pressure: 2400 bar Injection volume: 61cc Injection Weight: 54g Tool closing system: .../500 Closing force: 50 t Tool plate dimensions: 520 x 520 mm Clearance between columns: 355 x 355 mm Tool height: 210 mm Opening distance: 400 mm Max. Distance between plates: 610 mm General information: Dimensions(m) LxWxH: 3.7m x 1.4m x 1.8m Weight: 2900 kg

Price on request

Poland

Demag Ergotech 420-2300 NC4 Injection moulding machine Sold

Year: 1998

brand DEMAG Type Ergotech 420-2300 NC4 Year 1998 closing unit Closing force 420 ton Opening travel 710 mm Holmmass (h x v) 800 x 710 mm Installation height min. 380 mm Installation height max. 820 mm Plate size (h x v) 1200 x 1100 mm injection unit Screw diameter 70 mm Spray volume 1212 cm³ Spray weight PS 1090 gr Injection pressure 1877 bar mass and weight Dimensions LxWxH 8.8 x 2.2 x 2.4 m Machine weight 20000 Kg

Price on request

Germany

Demag Ergotech 2000-840 System NC4 Injection moulding machine Sold

Year: 2004

Demag Ergotech 2000-840 System NC4 Injection moulding machine

Price on request

Germany

Demag Ergotech NC4 50-200 Injection moulding machine Sold

Year: 1995

Manufactured year 1995 clamping force 50 T tie bars 355 x 355 mm Minimum mold thickness 210 mm Opening stroke 400 mm Hydraulic ejector 125 mm stroke

Price on request

Italy

Demag ERGOtech system 500-200 NC4 Injection moulding machine Sold

Year: 1997

brand DEMAG Type ERGOtech system 500-200 NC4 Year 1997 closing unit Closing force 50 ton Opening path 610 mm Beam dimension (h x v) 355 x 355 mm Installation height min. 210 mm Installation height max. 410 mm injection unit Screw diameter 25 mm Spray volume 74 cm³ Injection weight PS 67 gr Spray pressure 2400 bar mass and weight Dimensions LxWxH 3.8 x 1.6 x 2.0 m Machine weight 3200 kg

Price on request

Germany

Demag Ergotech 420-2300 NC4 Injection moulding machine Sold

Year: 1998

brand DEMAG Type Ergotech 420-2300 NC4 Year 1998 closing unit Closing force 420 ton Opening travel 710 mm Holmmass (h x v) 800 x 710 mm Installation height min. 380 mm Installation height max. 820 mm Plate size (h x v) 1200 x 1100 mm injection unit Screw diameter 70 mm Spray volume 1212 cm³ Spray weight PS 1090 gr Injection pressure 1877 bar mass and weight Dimensions LxWxH 8.8 x 2.2 x 2.4 m Machine weight 20000 Kg

Price on request

Germany

Demag Ergotech 420-2300 NC4 Injection moulding machine Sold

Year: 1995

Year of production 1995 Clamping force 420 Opening 710 Mould height 380.00 mm Injection 1090 Distance between tie bars 800x710 Screw diameter 70 mm Injection capacity 1212 ccm Equipment: 2 cores, euromap

Price on request

Poland

Demag Ergotech 50-200 Injection moulding machine Sold

Year: 1993

Production year: 1993 Control type: NC 4 TECHNICAL DATA Closing force: 500 kN Clearance between columns: 355 mm x 355 mm The dimensions of the panels: 530 mm x 580 mm The size of the mold: min 210 mm Opening road: 400 mm Max is distant. between the column: 610 mm Snail: 25 mm Injection volume: 61 ccm / 54 gram PS Injection pressure: 2400 bar GENERAL Engine: 15 kW Heaters: 5.1 kW Hours: Dimensions: 3.65 m x 1.45 m …

Price on request

Poland

Demag Ergotech System 500-200 NC4 Injection moulding machine Sold

Year: 1999

Manufacturer: DEMAG Type: Ergotech System 500-200 NC4 Year of construction: 1999 closing unit Closing force: tone 50 Opening travel: mm 610 Holmmass: mm 355 x 355 Installation height min / max: mm 210/410 injection unit Screw diameter: mm 22 Spray volume: cm³ 40 Spray weight: gr 36 Spray pressure: bar 2400 mass and weight Dimensions LxWxH: m 3.7 x 1.5 x 1.8 Machine weight: kg 3100

Price on request

Germany

Demag Ergotech 420-2300 NC4 Injection moulding machine Sold

Year: 1998

Manufacturer: DEMAG Type: Ergotech 420-2300 NC4 Year of construction: 1998 closing unit Closing force: tone 420 Opening travel: mm 710 Holmmass: mm 800 x 710 Installation height min / max: mm 380/820 Plate size: mm 1200 x 1100 injection unit Screw diameter: mm 70 Spray volume: cm³ 1212 Spray weight: gr 1090 Injection pressure: bar 1877 mass and weight Dimensions LxWxH: m 8.8 x 2.2 x 2.4 Machine weight: kg 20000

Price on request

Germany

Demag Ergotech 50-200 Injection moulding machine Sold

Year:

Closing force 500 kN Opening speed max. 400 mm Assembly height mold min. 210 Maximum distance between the 610 mm mold mounting plates Mold mounting plates 520 x 520 mm Light between the columns 355 x 355 mm Mold weight max 400 kg Extraction stroke 125 mm Screw diameter 30 mm Pressure 1990 bar Volume 106 cmc Injected peyyo weight 94 g Dosing stroke max. 150 mm Measures 3.6 x 1.4 x 1.8 m

Price on request

Italy

Demag ERGOtech system 500-200 NC4 Injection moulding machine Sold

Year: 1997

Clamping force50 ton Opening stroke610 mm Distance between tie bars355 x 355 mm Mould height min.210 mm Mould height max.410 mm Injection unit Screw diameter30 mm Injection volume105 cm³ Shot weight95 g Injection pressure1995 bar Measurements and weight Dimensions3,55 x 1,35 x 1,8 m Machine weight3100 kg

Price on request

Germany

Demag ERGOtech system 500-200 NC4 Injection moulding machine Sold

Year: 1997

brand DEMAG Type ERGOtech system 500-200 NC4 Year 1997 closing unit Closing force 50 ton Opening path 610 mm Beam dimension (h x v) 355 x 355 mm Installation height min. 210 mm Installation height max. 410 mm injection unit Screw diameter 30 mm Spray volume 105 cm³ Injection weight PS 95 gr Spray pressure 1995 bar mass and weight Dimensions LxWxH 3.8 x 1.6 x 2.0 m Machine weight 3200 kg

Price on request

Germany

Demag ERGOtech system 500-200 NC4 Injection moulding machine Sold

Year: 1997

brand DEMAG Type ERGOtech system 500-200 NC4 Year 1997 closing unit Closing force 50 ton Opening path 610 mm Beam dimension (h x v) 355 x 355 mm Installation height min. 210 mm Installation height max. 410 mm injection unit Screw diameter 30 mm Spray volume 105 cm³ Injection weight PS 95 gr Spray pressure 1995 bar mass and weight Dimensions LxWxH 3.8 x 1.6 x 2.0 m Machine weight 3200 kg

Price on request

Germany

Gebrauchte Spritzgießmaschine DEMAG Ergotech 50-200 NC 4 Sold

Year: 1995

Weg: 400 mm

Price on request

Germany

DEMAG ERGOTECH 50-200 (art.681) Sold

Year: 1997

DEMAG ERGOTECH 50-200 Compact NC 4 force tons: 50 shot ccm: 106 year: 1997 price: 8.500 €

Price on request

Germany

Demag Ergotech 420-2300 NC4 Injection moulding machine Sold

Year: 1998

Manufacturer: DEMAG Type: Ergotech 420-2300 NC4 Year of construction: 1998 closing unit Closing force: tone 420 Opening travel: mm 710 Holmmass: mm 800 x 710 Installation height min / max: mm 380/820 Plate size: mm 1200 x 1100 injection unit Screw diameter: mm 70 Spray volume: cm³ 1212 Spray weight: gr 1090 Injection pressure: bar 1877 mass and weight Dimensions LxWxH: m 8.8 x 2.2 x 2.4 Machine weight: kg 20000 Extras - 4 core trains - 1 air valve

Price on request

Germany

Demag Ergotech 50-200 Injection Moulder Sold

Year: 2004

Clamping force: 50 t Year: 2004 Shot capacity: 54 g Control: NC4 Screw diameter: 25 mm Injection pressure: 2400 bar Injection volume: 61 ccm Shot capacity: 54 g Clamping force: 50 t Plate size: 520 x 520 mm Distance between tie bars: 355 x 355 mm Mould height: 210 mm Opening storke: 400 mm Max.Daylight: 610 mm Machine dimensions(m) LxWxH: 3,70 x 1,40 x 1,80 m

Price on request

Poland

Demag Ergotech 50-200 Injection moulding machine Sold

Year: 2004

Year: 2004 Control: NC4 Injection unit: .../200 Screw diameter: 25 mm Specific injection pressure: 2400 bar Injection volume: 61cc Injection Weight: 54g Tool closing system: .../500 Closing force: 50 t Tool plate dimensions: 520 x 520 mm Clearance between columns: 355 x 355 mm Tool height: 210 mm Opening distance: 400 mm Max. Distance between plates: 610 mm Dimensions(m) LxWxH: 3.7m x 1.4m x 1.8m Weight: 2900 kg Instrumentation: The offer includes only an injection machine

Price on request

Poland

Demag ERGOtech 500-200 NC4

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?

Clamping force	50 T
Screw diameter	30 mm
Tie bar spacing (H)	355 mm
Tie bar spacing (V)	355 mm
Shot volume	105 cm³
Shot weight	95 g
Pressure on material	1995 bar
Platen length	520 mm
Platen width	520 mm
Robot interface
Number of cores	1
Opening of the press	610 mm
Mould size	210 - 410
-------------------
Length x width x height	3800.0 × 1600.0 × 1800.0
Weight	3200 kg