DMC Unisand 2000

Year: 1998

Working width 1300 mm. Complete with 2 rollers 1998

Year:

width : 1100 mm 1 roller 1 pad segment pads 1 oscillating pad

Year:

Year: 2003

Specifications 43" wide capacity • 6.69" maximum thickness opening • 1st working unit: 10" wide orbital pad powered by (1) 1.5 HP motor each that controls the orbital structure and (1) 5.5 HP motor each that controls the orbital pad • 2nd unit: 10" wide orbital pad powered by (1) 1.5 HP motor each that controls the orbital structure and (1) 5.5 HP motor each that controls the orbital pad • 7.9" diameter oscillating panel cleaning brush powered by (1) …

Year: 1998

Working width 1350mm Working thickness 4 - 170mm Belt size 1370 x 2620mm Feed speeds 3 - 17m/min Equipped with: + Electronic pad with 46 sections, motor 15kw + Scotchbrite brush, motor 2.2kw + Panel blower Infeed support rollers Belt cleaning blower on pad Softouch keypad for settings Amp-meter LED thickness readout

Year: 2000

1350mm, for paints: - 1st belt with roller D = 300mm soft rubber - 2nd belt with roller D = 300mm soft rubber, with inverter - Double roller scotch-brite oscillating D = 200mm - Blowers cleaning on both abrasive belts - Development of abrasive belts 2620 mm - Electronic oscillation of the sanding belts - Automatic table positioner - Variable speed feed - Carpet in good condition, with vacuum in the plan - Weight about 3500 kg - Machine CE, …

Year:

Line consisting of 2 DMC sanders

Year: 1998

Year:

top belt sanding machine

Year: 1999

Sanding & Polishing • Wide belt sanding machine • Serial number SA/003937 • Sanding width approx. 1350 mm • Workpiece thickness from 4 mm up to 170 mm • Vacuum transport belt, F.LLI FERRARI vacuum unit power 11 KW • Belt conveyor with variable feed speed • Feed motor power 4 KW • Aggregate 1: EPICS TA-46 transversal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 6550 x 150 mm, motor power 11 KW …

Year: 1998

DMC Sander mod. UNISAND 2000 Working width: 1350 mm. 1st cross group 2nd group combined: rubber roller + skate Exit cleaning group Vacuum carpet Blowers in sandboxes EC

Year: 2001

Machine equipped with vacuum holdown on feed belt, wired 460 volt. Rating: Very Good

Year:

DMC 3-unit sander equipped with: 1 first sanding calibration unit with 1 rubber roller 1 ramp of thickness detectors over the entire width of the wide belt sander, This finishing sander is equipped with a segmented electronic pad and an orbital vibrating pad vacuum belt for short parts, speed variator on the belts cleaning blow guns working width: 1100 mm

Year: 2000

Calibrating DMC model Unisand 2000 M2 1350mm, for paints: - 1 ° belt with roller D = 300mm soft rubber - 2 ° belt with roller D = 300mm soft rubber, with inverter - Double roller scotch-brite swing D = 200mm - Blowers cleaning on both abrasive belts - Development of abrasive belts 2620 mm - Electronic oscillation of the sanding belts - Automatic table positioner - Feed speed variator - Carpet in good condition, with depressor in the plan …

Year: 2002

Calibrating and Sanding Bottom and Top DMC model Unisand 2000 M3. Year 2002. Thickness: 4-170 mm Longitudinal sanding belt: 1370 x 2620mm Feeding speed: 4,5 – 18mt/min Vaccum Entrance table with 2 roller Exit table with 1 roller Electronic display Bottom machine: Steel roller diam. : 250mm Motor power: 22,5 Kw Rubber roller diam. : 250mm Motor power: 18 Kw Section sanding pad: 12|9 Kw with 2 speeds EPICS Top machine: Steel roller diam. : 250mm Motor power: 22,5 Kw …

Year: 2000

DMC UNISAND 2000 Calibration Line - maximum workable width 1350 mm - 1 inlet roller conveyor dimensions 3300 x 1340 x 960 mm - sander from below US 1350 M2 / I with 2 smoothing belts - MAHROS TS / WN conveyor belt, dimensions 4450 x 1420 mm - sander from above US 1350 M2 with 2 smoothing belts - exit roller conveyor, dimensions 5000 x 1350 mm - 1 Ferrari engine for depression expulsion of powders