Manufacturer | Dmg Mori |
---|---|
Model | NTX 1000 |
Category | Lathes - cnc lathes |
Turning length | 450 mm |
Turning Ø | 370 mm |
Type of CNC | Siemens 840 Dsl -Operate |
Spindle taper | Capto C5 |
Spindle bore | 73 mm |
Number of turrets | 38 |
Number of tools on turret | 38 |
Turning speed | 20000 rpm |
Tailstock | no |
Bar feeder | no |
------------------- | |
Length x width x height | 3570.0 × 2690.0 × 2870.0 |
Weight | 8500 kg |
Year: 2012
Manufacturer DMG MORI Model NTX 1000 Year Built 2012 Control Siemens 840 Dsl -Operate Chuck diameter 170/140 mm Turning diameter approx. 370 mm Turning length approx. 450 mm Spindle passage 65 mm Technology motor spindle Speed 5,500 rpm Power 11 kW Torque 223 Nm C-axis 0.001 Rod end ratchet 65 mm Clamping cylinder hollow clamping cylinder Voltage difference compressive stress Chuck I Hainbuch Chuck II Röhm DURO-NC 170 Techonolgie motor spindle Speed 6,000 rpm Power 7.5 kW C-axis 0.001 Clamping …Price on request
Germany
Year: 2012
Standard equipment - subspindle as integrated spindel motor power 5,5/7.5 KW (7,37/10.05 hp) (100/40% ED), 6000 rpm - hydraulic clamping device, - C-axis and brake (hydr.) - absolut, direct measuring systems in linear axes X1, Y1, Z1 - coolant pump 8 bar; 35 l/min (116.03 psi / 9.24 gal/min) - chip conveyor, discharge hight 600 mm (23.62 in) - cooling unit for spindle motors, turn- millspindle, B-axis-torque motor - USB-interface, ethernet-interface Hollow clamp. attachment dia. 66mm (max. 5.500rpm) Hydraulic hollow …Price on request
Germany
Year: 2015
Price on request
France
Year: 2015
Outstanding machine in perfect condition. Year 2015 - Last generation NTX11150407 Series cutting time 9232 hours operating time 11703 hours Working time 22218 hours With Iemca barge up 80 Muller high pressure pump Paper filter Remote cold groupPrice on request
France
Year: 2019
This DMG MORI NTX 1000 milling turning machine was made in Japan in the year 2019. It is controlled by a DMG MORI ERGO line control unit. The machine has a spindle speed of 5000 rpm. This high-quality machine is immediately available. Machine weight: 11500 kg CNC: DMG MORI ERGO line Spindle speed range: 5000 rpm Main electronic connection: 200 V Power consumption: 54 kVAPrice on request
Czech Republic
Year: 2017
CNC Control: F31iB5 with CELOS – ERGOline Touch Capacity Max. turning length mm: 800 Max. turning diameter mm: 430 (Turret 2: 274) Max. Workpiece swing diameter mm: 450 Rapid traverse tool spindle X, Y, Z,, m / min: 40,40,50 Rapid traverse lower revolver: X, Z m / min .: 28,26 Rapid traverse counter spindle m / min .: 36 Rapid traverse B,C min-1: 100,250 Tool spindle X-axis mm: 455 Y-axis mm: ± 105 Z-axis mm: 800+155 <ATC travel> B axis …Price on request
Germany
Year: 2017
MAIN SPINDLE - Bar diameter: 52 mm - Diameter above the bed: 450 mm - Diameter above the carriage: 450 mm - Max turning diameter: 430 mm - Max turning length: 800 mm - Spindle speed: 6000 rpm - Spindle nose: JIS A2-5 - C axis: 360° indexing increment 0.001° COUNTER SPINDLE - Spindle speed: 6000 rpm - Spindle nose: JIS A2-5 - C axis: 360° indexing increment 0.001° MILLING HEAD - B axis - Spindle speed: 12000 rpm - …Price on request
France