Machine's specifications - Gildemeister CTX 400 E Used machines

Manufacturer	Gildemeister
Model	CTX 400 E
Category	Lathes - cnc lathes

Gildemeister CTX 400 S2 cnc lathe Sold

Year: 1998

CNC lathing machine Gildemeister CTX 400 S2 Year of construction: 1998 Machine CTX400S2 Year of construction 1998 Switch-on times 42150 hrs Condition very well maintained! Revolver 12 stations VDI30 tailstock Chip conveyor + Cooling device Feed Ø 210 Schunk

Price on request

Germany

Used Gildemeister CTX 400 S2 cnc lathe Sold

Year: 1999

Machine parameters: - Head 12 - tools for fitting VDI-30 - Max rpm. 5000 / min. - Max Wed. engage into. X = 290mm - Max length. Engage into. Z = 600mm - The main spindle holder Fi-200mm - Collector finished part - Cooling system - Chip conveyor - Spindle bore: Fi-66mm - Full manual programming - DTR - The weight of the machine: 5.5 tons

Price on request

Poland

Gildemeister CTX 400 cnc lathe Sold

Year: 1992

Swing over bed 500 mm Maximum turning length 640 mm Turning diameter 290 mm Turret carriage: Longitudinal travel (Z-axis) 640 mm Transversal strocke (X axis) 212 mm Turret slide: number 1 Number of positions turret 1 12 Inner cone DIN 69880 Indexing time 0.8 sec Main spindle: Spindle hole 72 mm Spindle speeds: stepless from 25 rpm up to 5000 rpm Torque max. 420 Nm Spindle power 22 kW Morse taper 4 MT Spindle stroke 100 mm Spindle diameter 80 …

Price on request

Switzerland

Used Gildemeister CTX 400 Cnc lathe Sold

Year: 2000

Heidenhain 3190 DINplus of Turn Plus Swing over bed 570 mm Swing over cross slide 420 mm Turning length 635 mm The diameter of the handle 250 KHNC 250/56 Engine power 21 KW Speed range from - 25 - 5000 rev / min Dimensions of the machine ca 4,3 / 1,8 / 2 m 12x revolver (without driven tools) Equipment: tailstock, chip conveyor

Price on request

Germany

Used GILDEMEISTER CTX 400 S2 Cnc lathe Sold

Year: 1997

Delivery time on inquiry urning diameter 420 mm turning length 635 mm control Heidenhain EPL mit Din PLUS tool taper VDI 30 mit 8 Werkzeughalt Turret 12 Plätze Speed bis 5.000 U/min. connected load 44 kVA Machine on 31206 h weight of the machine ca. 5,3 t dimensions of the machine ca. 4,3 x 1,8 x 2,0 m m

Price on request

Germany

GILDEMEISTER CTX 400 S2 CNC Lathe Sold

Year: 1997

tool taper VDI 30 mit 8 Werkzeughalt Turret 12 Plätze Speed bis 5.000 U/min. connected load 44 kVA chip conveyor 8 toolholders VDI 30 documentation no driven tools

Price on request

Germany

GILDEMEISTER CTX 400 E Cnc lathe Sold

Year: 1998

Price on request

France

Gildemeister CTX 400 S2 cnc lathe Sold

Year: 1998

Max. turning diam. 420 mm. Max, turning length: 630 mm. Max. rotating diam. 570 mm. Spindle rpm 25-5000 X= 220 mm. Z= 635 mm. Rapid X-Z: 20-24 m/min Machine dimensions: 4300 x 1750 x 1750 mm, weight: 5500 kg.

Price on request

Italy

Gildemeister CTX 400 S2 cnc lathe Sold

Year: 1998

cnc HEIDENHAIN PILOT 1190

Price on request

Italy

Gildemeister CTX 400 S2 cnc lathe Sold

Year: 1998

1998

Price on request

Poland

CNC Lathe GILDEMEISTER CTX 400 S2 Sold

Year: 2002

turning diameter max. 400 mm turning length max. 600 mm control DIN Plus Turn Plus standard turning dia. 200 mm turning diameter over bed 570 mm turning dia. over face-slide 470 mm Main spindle: turning speed range - main spindle 25 - 5.000 min/-1 power capacity - main spindel 21 kW max. Torque 240 Nm spindle diameter in front bearing 120 mm spindle bore ( 79 ) mm usable bar diameter ( 68 ) mm chucking diameter 200 mm spindle …

Price on request

Germany

GILDEMEISTER CTX 400 S2 cnc lathe Sold

Year: 2000

Technical details turning diameter 570 mm turning length 635 mm control Heidenhain CNC Pilot 4290 turning diameter over bed slide 420 mm spindle turning speed - stepless 25-5000 U/min number of driven tools 6 mm Drive 5 kW total power requirement 30 kW Additional information CNC HEIDENHAIN Pilot 4232 C-axis with 6 driven toolings 20 FIXED VDI 30 TOOLING 1 CHUCK + 1 COLLET CHUCK CHIP CONVEYOR ONLY 15000 RUNING HOURS

Price on request

France

Gildemeister CTX 400 cnc lathe Sold

Year: 2002

Year prod. 2002. Control Sinumerik 840 D ShopTurn. Max. turning diameter 400 mm, maximum turning length of 600 mm. Head for 12 tools including 6-powered. ejector chip, interface for the magazine rod a set of tools.

Price on request

Poland

Used Gildemeister CTX 400 2-axis CNC Lathe Sold

Year: 1991

Maximum turning diameter 250 mm Maximum turning length 600 mm Maximum swing 500 mm Maximum spindle bore for bar work 60 mm Spindle speed 25-5000 Rpm Number of tools on turret 12 Tool type DIN 69880 VDI-30 CNC control EPL-2

Price on request

Netherlands

Gildemeister CTX 400 cnc lathe Sold

Year:

- system Heidenhain EPL2.2 (system failure) - d1/d2xl=290/500x640 mm - center distance 750 mm - spindle hole 72 mm - spindle RPM 25-5000 - accessories (chip conveyor, tailstock, cooling, 12 pos. turret, others) - books

Price on request

Unknown country

Gildemeister CTX 400 CNC lathe Sold

Year: 1998

Live tooling 6x

Price on request

Netherlands

Gildemeister CTX 400 S2 cnc lathe Sold

Year: 2002

Swivel diameter: 570 mm Torque: 635 mm Spindle bore: 78 mm Sloping bed: Yes Fanuc Control System: Fanuc 21i Swing over the support: 420 mm X-axis travel: 220 mm Z-axis travel: 635 mm Rapid traverse of the X axis: 20 m / min Fast Z axis: 24 m / min Tool tray: true Number of tool tray positions: 12 Spindle speed: 5000 / min. Fanuc 21i Controller, RS-232 Port. 3-jaw chuck, diameter 203 mm. Including conveyor belts. The machine is …

Price on request

Czech Republic

GILDEMEISTER CTX 400 CNC Lathe Sold

Year:

Lathes Working range: Swing diameter over bedway cover: 500 mm Swing diameter over guideway cover: 290 mm face travel: 212 mm Lengsweg: 640 mm Turning spindle: Spindle head (flat flange): 140 h5 mm spindle head diameter in front bearing: 100 mm chuck diameter: 200 mm Main drive AC: Drive power: 100% ED (60%) power range: 1:5 22 (27,5) kW Feed drive AC: X-feed force: 100% ED 4000 N Z-feed force: 100% ED 8000 N X-rapid feed m/min: 10 Z rapid …

Price on request

Germany

GILDEMEISTER CTX 400 E CNC lathe Sold

Year: 1999

Turning diameter over bed: 570 mm Turning length: 635 mm Spindle hole diameter: 79 mm Spindle r.p.m.: 25 - 5 000 r.p.m. Tools magazine: 12 pcs. Rapid traverse: X: 20 m/min Z: 24 m/min Overall power demand: 44 kVA Dimensions: length: 3 200 mm width: 1 750 mm hight: 1 750 mmWeight: 5 300 kg Control: CNC HEIDENHAIN EPL

Price on request

Poland

Gildemeister CTX 400 cnc lathe Sold

Year:

Controller : Heidenhain Swing over bed 500 mm Maximum turning length 640 mm Turning diameter 290 mm Turret carriage: Longitudinal travel (Z-axis) 640 mm Transversal strocke (X axis) 212 mm Turret slide: number 1 Number of positions turret 1 12 Inner cone DIN 69880 Indexing time 0.8 sec Main spindle: Spindle hole 66 mm Inner taper type HAINBUCH SK65 BZI Spindle speeds: stepless from 25 rpm up to 5000 rpm Torque max. 420 Nm Spindle power 22 kW Morse taper …

Price on request

Switzerland

GILDEMEISTER CTX 400 cnc lathe Sold

Year: 1991

Max. turning Ø 500 mm X-Axis 600 mm Z-Axis 212 mm Spindle bore 72 mm Speed range 5000 rpm Spindle power 22 kW ATC / revolver 12

Price on request

Netherlands

Used Gildemeister CTX 400 S2 Cnc lathe Sold

Year: 2000

Heidenhain 3190 Spindle speed 5000 rpm Feed accelerated axis X 25m / min. Feed accelerated axis 25m / min. Max length. Turning the Z axis 600mm Max Avg. 290mm X axis rolling probe Holder Ø 250mm tailstock chip conveyor Machine weight 5.5 tons Year of production 2000

Price on request

Poland

Used GILDEMEISTER CTX 400 S2 Cnc lathe Sold

Year: 1997

CNC Gildemeister CTX Drehamschine - 400 Incl. Includes chip conveyor. VDI 30 tool holder 8 Incl. Documentation for mechanical, electrical, operating manual and programming manual driven tools not

Price on request

Germany

Gildemeister CTX 400 - CNC Lathe Sold

Year: 1992

Specifications: Max. Turning dia o/slide 500 mm dia. Max. Turning diameter 290 mm dia. Turning Length 635 mm Spindle Speeds 25-5000 pr/min Spindle bore 62 mm dia. Tooling system 12 Rapid feeding. 15 m/min Main motor power 22 kw Control system EPL 2-2 Controlled in 3 axis C Axis - Mainspindle Stroke 360 Live Tooling Spindle speeds 20-4000 rpm Rotary Tool Motor Power 2,1 kw Accessories: Various toolposts. Live Tools rade 2 pcs. Live angle Tools 2 pcs. 3-jaw centre …

Price on request

Denmark

Gildemeister CTX 400 S2 cnc lathe Sold

Year: 2002

This Gildemeister CTX 400 S2 Lathe was manufactured in the year 2002 in Germany and has 47795 production hours. It is equipped with a HEIDENHAIN control unit. The machine has a spindle speed of 25- 5000 rpm. Machine width: 3570 mm Machine depth: 1750 mm Machine height: 1750 mm Machine weight: 5700 kg CNC: HEIDENHAIN Spindle speed range: 25 - 5000 rpm X-Axis Movement: 600 mm Tools

Price on request

Latvia

GILDEMEISTER CTX 400 E cnc lathe Sold

Year: 2002

Capacity O Number Of Axes Controlled: 4 O Maximum Rotating Diameter On Bench: Mm 570 O Maximum Turning Diameter: Mm 420 O Bar Passage: Mm 65 Useful Length: Mm 630 Spindle O Spindle Motor Power: Kw 21 O Self-centering Diameter: Mm 210 · Turret O N. Tools: 12 O Tool Attachment: Vdi 30 O N.7 Motorized Modules For Turret O Turret With Y Axis High Pressure With 1000 Liter Booster Tank Chip Conveyor Excellent Condition Prompt Delivery Visible Under Power

Price on request

Italy

Gildemeister CTX 400 cnc lathe Sold

Year: 1995

The GILDEMEISTER CTX 400 CNC lathe was manufactured in 1995 by GILDEMEISTER Drehmaschinen GmbH in Germany. The machine processes a workpiece with a maximum turning diameter over the bed of 500 mm, a turning diameter over a slide of 290 mm, and a turning length of 640 mm. The lathe spindle rotates at 3200 rpm. The automatic lathe is equipped with a tool head for twelve VDI 40 tools and an EPL 2 CNC control. Technical data of the CNC …

Price on request

Poland

Gildemeister CTX 400 cnc lathe Sold

Year: 1991

Control system: Eltro-Pilot Total hours: 65 750 h Maximum power of the main spindle: 22 kW Maximum-turning length: 600 cm Max. turning diameter: 450 mm Length of the lathe: 4527 mm Width of the lathe: 1940 mm Height of the lathe: 1730 mm Weight of the lathe: 5 t Equipment: Chip conveyor Automatic tailstock Chuck Technical books Holders X-axis and Z-axis

Price on request

Czech Republic

Used GILDEMEISTER CTX 400 S cnc lathe Sold

Year: 2002

Year: 2002 CNC Fanuc 21i TS Max rotating diameter: 570 mm Max turning length: 635 mm Max turning diameter: 420 mm Bar passage: 65 mm X axis: 220 mm Z axis: 635 mm Fast forward X-Z 20-24 Spindle spindles5000rpm Motor power 21Kw Maximum torque 240Nm Spindle hole 79 mm 12 tool holder turret Motorized turret Tailstock diameter in the front 80 mm Tailstock path 550 mm Tailstock housing (conomorese) MK 4 Complete with: Chip conveyor Tool presetting Hand pick up …

Price on request

Italy

Gildemeister CTX 400 cnc lathe Sold

Year: 1990

Rotating diameter 250 mm Rotating length 600 mm Max. Speed (rpm) 25 - 5,000 rpm Circumferential diameter over bed 500 mm Circular diameter over plan slide 290 mm Machine weight approx. 5.2 t Machine mass approx. 6,0x2,5x1,8 m Operating hours approx. Including Spaenefoerder Allweiler; Mountain hollow fixture; Parts removal device; Tailstock; Sauter Revolver with VDI30 (12x), Known error Reistock / Quill and / or part removal device Relaiskarte defective, if these functions should be repaired. Map shown in jpg Machine …

Price on request

Germany

Gildemeister CTX 400 Sold

Year:

Price on request

Belgium

Used GILDEMEISTER CTX 400 CNC lathe Sold

Year:

65MM BAR CAPACITY SWARF CONVEYOR PARTS CATCHER

Price on request

United Kingdom

Gildemeister CNC Drehmaschine CTX 400 Sold

Year: 1998

Steuerung : Heidenhain CNC Pilot Planweg 220 mm, Laengsweg 635 mm, 21.000 Einschaltstunden, Revolver 12 fach, VDI 30, Durchlass 65 mm, Spannzangenfutter mit 60 spannzangen, 15 starre Halter,

Price on request

Germany

Used CNC lathe GILDEMEISTER CTX 400 + C axis Sold

Year:

Used CNC lathe GILDEMEISTER CTX 400 + C axis whole through the spindle 79mm , turns 5000rpm , tools store 12 , VDI30 , tool's drive, tout ,chip conveyor, 7 pcs of the tools with drive are included in the set bar feeders from LNS

Price on request

Poland

Used Gildemeister, Model CTX 400. Cnc Lathe, w/ Siemens controls Sold

Year:

Specifications X travel: 650 mm (25.59”) Z travel: 260 mm (16.236” Center distance: 27” Spindle motor: 8 kw (10HP) Turret stations: 12 Wired: 240 volt, with step down transformer EQUIPPED WITH: Tail stock Parts catcher Shunk Md. THW-166-37 3-jaw chuck, (6.1”) (28) sets of Shunk jaws Hainbach Md. SP0218015900 Collet nose with approx. 2 ½” bore, 105 kn max pressure Siemens controls Turret tool holders Full set of manuals Factory rebuilt: 2006

Price on request

USA

GILDEMEISTER CTX 400 E Cnc lathe Sold

Year: 1996

C -axis CNC Heidenhain Eltro Pilot 3190 against advanced conveyor has chips PASSAGE above bench 570 mm PASSAGE above the carriage 420 mm length of FILMING 635 mm door tools VDI 40 watering 1 Chuck 1 door tools fixed 1 door AXIAL rotary tool staffing

Price on request

France

Used GILDEMEISTER CTX 400 E Cnc lathe Sold

Year: 1998

HEIDENHAIN PILOT 3190 5000 rpm spindle. Subspindle Yes + C axis Head - SAUTER - 12 tools Live Tools Yes - all slots C axis on main and soaring X-axis rapid traverse 25m/min. Z-axis rapid traverse 25m/min. Max turning length 500 mm Z axis Maximum turning diameter 350mm X-axis Skid finished part T chip conveyor Hours of work in auto 8387 Machine weight 6500kg

Price on request

Poland

Gildemeister CTX 400 Cnc lathe Sold

Year: 2006

ONE USED GILDEMEISTER CNC LATHE Model: CTX 400 X travel: 650 mm (25.59”) Z travel: 260 mm (16.236” Spindle RPM: 25 to 5000 Spindle bore: 72 mm (2.834”) Center distance: 27” Spindle motor: 8 kw (10HP) Turret stations: 12 Wired: 240 volt, with step down transformer EQUIPPED WITH: Tail stock Parts catcher Shunk Md. THW-166-37 3-jaw chuck, (6.1”) (28) sets of Shunk jaws Hainbach Md. SP0218015900 Collet nose with approx. 2 ½” bore, 105 kn max pressure Siemens controls Turret …

Price on request

USA

GILDEMEISTER CTX 400 Cnc lathe Sold

Year: 1991

turning diameter 290 mm turning length 640 mm control EPL 2 swing diameter max. over bed cover 500 mm swing diameter over face slide 290 mm travel -x axis 212 mm travel -z axis 640 mm spindle bore 72 mm spindle turning speed range 25 - 5000 U/min tool taper VDI 30 DIN 69880 turret head 12 Pos. 3-jaw-chuck diameter 200 mm spindle taper Ø 140 h5 rapid travel - longitudinal/face 15 / 10 m/min taper in tailstock-quill MK 4 …

Price on request

Germany

Gildemeister CTX 400 Cnc lathe Sold

Year: 1998

X: 420 mm Y : 635 mm CNC PILOT 3190 Heidenhain Control unit machine is in very good condition

Price on request

Turkey

GILDEMEISTER CTX 400 cnc lathe Sold

Year:

Machine parameters: - head 12 - gear on the holder VDI 30 - axis C - 6 slots driven - maximum torque. 5000 / min. - the power of the drive spindle 22 KW - max Wed. of turned. X = 500mm - l max. Of turned. Z = 640mm - hydraulic chuck on the main spindle 200mm-Fi - Fi-through spindle 72mm - feeder rod detail-receiver - cooling system - hydraulic tailstock - chip conveyor - full programming guide - …

Price on request

Poland

Gildemeister CTX 400 cnc lathe Sold

Year: 1991

CNC lathe Gildemeister CTX 400 Year of production 1991 Turning diameter max. 500 mm Turning length max. 640 mm Spindle bore 72 mm Rotation max. 5,000 rpm Chip ejector Machine dimensions 4.5 x 2.0 x 1.8 m Weight approx. 5 t

Price on request

Poland

Gildemeister CTX 400 S2 cnc lathe Sold

Year: 1999

Max. Turning length 600 mm Max swing over bed 570 mm Max. Swing over cross slide 470 mm Spindle bore 79 mm Max. Chuck diameter 250 mm With a chuck diameter of 200 mm, 47 mm bar passage with chuck diameter 250 mm, 64 mm bar passage Total connected load 44 kVA Equipment: - Heidenhain Turn Plus CNC control - C axis - 12-pos turret (VDI 30) with driven stations - Tailstock - chip conveyor - Coolant device - oil-mist …

Price on request

Germany

CNC lathe Gildemeister CTX 400 S2 Sold

Year: 2000

Max turning length: 635 mm Max. turning diameter: 420 mm Type of CNC: Heidenhain many tools excellent condition!

Price on request

Serbia

Used Gildemeister CTX 400 Cnc lathe Sold

Year:

model CTX 400 ELTROPILOT control turning diameter 290 / 500mm, turning length 640mm speed 5000rpm, 72mm, tailstock, chip conveyor, warehouse 12ATC, the machine is ready to work, very good condition !!

Price on request

Poland

Gildemeister CTX 400 E cnc lathe Sold

Year: 1997

This Gildemeister CTX 400 E Lathe was manufactured in the year 1997 in Germany and has 43974 production hours. It is equipped with a HEIDENHAIN ELTROPILOT control unit. The machine has a spindle speed of 25-5000 rpm. CNC: HEIDENHAIN ELTROPILOT Spindle speed range: 25-5000 Spindle motor power: 9-12 kW The original hydraulic pump has been replaced by an added system. Fully functional

Price on request

France

GILDEMEISTER CTX 400 Cnc lathe Sold

Year: 1993

CNC lathe with tailstock, C-axis and driven tools. The previous owner made products on the machine for the optics and the defense sector. The machine can be inspected under power in our warehouse. Equipment * CNC-control ELTROPILOT TurnPlus (software version 4.4) * C-axis * hydr. power-chuck Forkardt 3 NHF-250 * 2 off driven toolholders and several standard toolholders * 12-station turret (6 driven positions, 12 Nm / 5 kW at 4000 rpm/ min.) 30 mm DIN 69880 * Coolant system …

Price on request

Germany

Used Gildemeister CTX 400 Cnc lathe Sold

Year: 1996

C-Achse, angetr. Werkzeuge, Spindelbohrung 72 mm, Revolver 12-fach / 6 Stationen angetrieben, Forkardt Futter 200 mm

Price on request

Germany

Gildemeister CTX 400 E cnc lathe Sold

Year: 1999

CNC lathe no livetools, no tailstock, coolant device, chipconveyor, hollow clamping device, with collet chuck, incl. barloader IEMCA MASTER 80HF, approx. 15.000 hours. turning diameter 420 mm turning length 600 mm control Heidenhain CNC-Pilot swing diameter 570 mm spindle bore 79 mm spindle turning speed range 25 - 5000 1/min 3-jaw-chuck diameter 200 max. 250 mm swing diameter over face slide 420 mm turret (x-stations) 12 Pos. total power requirement 44 kVA main drive motor 21 kW weight of the …

Price on request

Germany

GILDEMEISTER CTX 400 CNC lathe Sold

Year: 1991

CNC EPL-2 Working hours: 29.000h 3-clamping jaw Revolver 12x Chip conveyor Tailstock MK 4 Swing over bed 500mm Swing over cross slide 290mm Quil height 300mm Turning length 600mm Spindle bore 72mm Spindle diam. of anterior bearing 100mm Fast traverse speed 10m/min Tapping feed speed 25- 5000U/min

Price on request

Poland

GILDEMEISTER CTX 400 cnc lathe Sold

Year:

FANUC 21I SELF AUTOBLOK DIAM. 250 MM PRESETTING TOOL BAR PACKAGE INTERFACE LOADER ARM DOWNLOAD SLICED PIECE 02 FORMS DRIVEN AXIAL 01 MODULE POWERED RADIAL Field of work Chuck diameter 250 mm Spindle hole 79 mm Max. rotating the base 570 mm Max. rotating the cross slide 420 mm Max. Swing 304 mm Spindle Mounting flange spindle mm 170h5 Internal diameter front bearing 120 mm Maximum rpm rev / min 5000 Available power (100% - 40%) KW 21 - 28 …

Price on request

Italy

Gildemeister CTX 400 cnc lathe Sold

Year: 1990

CNC lathing machine Manufacturer: Gildemeister Type: CTX 400 Year of construction: 1990 Technical Details: Rotating diameter over bed 500mm X-axis 212mm Z axis 640mm Spindle bore 72mm Speed 5000 rpm. Rapid traverse x-axis 10m / min. Rapid traverse z-axis 15m / min. Space requirement 4527x1940x1730mm Weight 5140 kg • Operating hours approx. 63800 h • Chip conveyor Allweiler • Mountain hollow clamping device • Part removal device • Reistock • Sauter turret with VDI30 (12x)

Price on request

Germany

CNC lathe GILDEMEISTER CTX 400 Sold

Year: 1991

C axis tailstock center motorized toolholder turret VDI 40 positions 1 motorized tool fixed toolholder chip conveyor Handbooks

Price on request

Italy

Second-hand CNC lathe GILDEMEISTER CTX 400 Sold

Year: 1998

Without motorised tools

Price on request

Germany

GILDEMEISTER CTX 400 Twin Bi broches 4 axes Sold

Year: 2000

Heidenhain Eltropilot II (DIN plus) 12 x Live tooling (3,7 kW / 4500 rev/min) 5000 Rev/min Incl. toolsetter Chip conveyor, part catcher Main spindel 18 kW by 5000 rev/min Subspindel 7,5 kW Full C-axis Y AXIS INTERFACE FOR BARLODER PART CATSCHER

Price on request

Germany

Gebrauchte GILDEMEISTER CTX 400 Schrägbettmaschine Sold

Year: 1996

Revolverkopf (x-fach) 12pos. x-Weg 212 mm z-Weg 640 mm Drehzahlbereich 25 - 5000 U/min Vorschübe - längs 0,5 - 5000 mm/min Vorschübe - plan 0,5 - 5000 mm/min Eilgang - längs/plan 15 / 10 m/min Reitstockkonus MK 4 Reitstockpinolendurchmesser 80 mm Reitstockpinolenhub 100 mm Gesamtleistungsbedarf 22 kW

Price on request

Germany

GILDEMEISTER CTX 400 CNC Lathe Sold

Year: 1995

greates pass round over bed 500 mm diameter of spindle flange 140 h5 mm spindle diameter in front bearing 100 mm hollow spindle diameter 65 mm max. torque on the spindle 150 Nm longitudinal stroke 650 mm chucking diameter max. 250 mm face stroke 212 tailstock quill diameter 80 mm tailstock quill taper MT 4 tailstock travel 100 mm feeds - longitudinal 0,5 - 5000 mm/min feeds - cross 0,5 - 5000 mm/min rapid travel - longitudinal/face 10 m/min power …

Price on request

Germany

GILDEMEISTER CTX 400 CNC Turning- and Milling Center Sold

Year: 1996

swing diameter 570 / 470 mm travel -x axis 220 mm travel -z axis 635 mm spindle speed: 25 - 5000 1/min C-Axis Ja turret head 12 Pos. Driven Tools 6 Pos. rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min drive capacity - spindle motor 21 kW power capacity - milling spindle 1,4 kW tailstock adjustment 550 mm taper in tailstock-quill MK 4 dia. of quill 80 mm voltage 400 V total power requirement 44 kVA - c-axes …

Price on request

Germany

Used GILDEMEISTER CTX 400 Cnc lathe Sold

Year: 1991

Price on request

Italy

Used GILDEMEISTER CTX 400 Cnc lathe Sold

Year: 1991

Price on request

Ukraine

Used GILDEMEISTER CTX 400 Cnc lathe Sold

Year: 2000

Price on request

Poland

GILDEMEISTER CTX 400 Cnc lathe Sold

Year: 1991

swing diameter over slide rest 260 mm greates pass round over bed 400 mm diameter of spindle flange 140 h5 mm spindle diameter in front bearing 100 mm spindle bore 72 mm hollow spindle diameter 55 mm longitudinal stroke 630 mm chucking diameter max. 250 mm max. torque on the spindle 150 Nm face stroke 260 tailstock quill diameter 80 mm tailstock quill taper MT 4 tailstock travel 100 mm feeds - longitudinal 0,5 - 5000 mm/min feeds - cross …

Price on request

Russia

Gildemeister CTX 400, Siemens, 6"Chk, 2 3/4", Factory rebuilt 2006, well tooled Sold

Year: 2006

ONE USED GILDEMEISTER CNC LATHE Model: CTX 400 X travel: 650 mm (25.59”) Z travel: 260 mm (16.236” Spindle RPM: 25 to 5000 Spindle bore: 72 mm (2.834”) Center distance: 27” Spindle motor: 8 kw (10HP) Turret stations: 12 Wired: 240 volt, with step down transformer EQUIPPED WITH: Tail stock Parts catcher Shunk Md. THW-166-37 3-jaw chuck, (6.1”) (28) sets of Shunk jaws Hainbach Md. SP0218015900 Collet nose with approx. 2 ½” bore, 105 kn max pressure Siemens controls Turret …

Price on request

USA

GILDEMEISTER CTX 400 E Cnc lathe Sold

Year: 1997

* subspindle * 2 x C-axis * driven Tools * swarf conveyor * several toolholders * 3-jaw power chuck Forkardt 3FNC-200 (main spindle) * 3-jaw power chuck Forkardt 3KTHS-140 (subspindle) Working hours = 19424 h. 5 years ago the ball-screws have been replaced. Machine is in very good condition and maintained.

Price on request

Germany

Used Gildemeister CTX 400 E Cnc lathe Sold

Year: 1997

control HEIDENHAIN PILOT 3190 Spindle speed 5000 rpm Subspindle + C axis Head SAUTER - 12 tools Driven tools - all slots C-axis Feed accelerated axis X 25m / min. Feed accelerated axis 25m / min. Max length. Turning the Z axis 500mm Max Avg. 350mm X axis rolling Collector finished part tailstock chip conveyor Hours. Working in auto 8387 Machine weight 6500kg Year of production 1997

Price on request

Poland

GILDEMEISTER CTX 400 Cnc lathe Sold

Year: 1999

turning diameter 570 mm turning length 635 mm control Heidenhain CNC Pilot 3190 turning diameter over bed slide 420 mm spindle turning speed - stepless 25-5000 U/min spindle bore 79 mm rapid travel - longitudinal/face 20 m/min tailstock taper MT 4 tailstock quill diameter 80 mm main drive 21 kW total power requirement 30 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,3 x 1,8 x 1,75 m Additional Informations CNC HEIDENHAIN Pilot turret head …

Price on request

Germany

Gildemeister CTX 400 Cnc lathe Sold

Year: 1994

two axes without motorized Gildemeister Turning diameter: 400 mm Turning length: 600 mm EPL control z: 640 mm x: 212 mm spindle speed: 20 - 5000 g / min Wrong?

Price on request

Italy

GILDEMEISTER CTX 400 E Cnc lathe Sold

Year: 1997

DIAM LAV ON BENCH 570 MM DIAM GUIDE TO WORK ON CROSS 420 MM CROSS ROUTE 220 MM PATH LONGITUDINAL 635 MM DIAM spindle head 170 H5 DIAM PORTAM.NEL HEAD FRONT SUPPORT 120 MM SPINDLE HOLE 79 MM DIAM CHUCK IS TIGHTENING 250 MM DRIVING FORCE OF 100% 21 KW MAXIMUM TORQUE 240 NM FIELD SCHEME 25 5000 FORCE FEED X 3.5 FORZA Z feedrate KN 7 SPEED TRAVEL FAST X 20 M MIN SPEED TRAVEL FAST Z 24 M …

Price on request

Italy

Gildemeister CTX 400 cnc lathe Sold

Year: 1991

Year built: 1991 EPL Control 2 Number of hours: 28910 handle trojszczękowy Revolver 12 pcs. Onstalacja removes chips Konik MK 4 Specifications: Fly-Ø over bed 500 mm Ø Flight planning on running a 290 mm Height 300 mm 600 mm Longitudinal feed Drilling spindle 72 mm Spindle diameter 100 mm The expedited procedure 10 m / min Turnover anywhere between 25 to 5000 rev / min Machine dimensions 4150 x 1830 x 2000 mm Machine weight approx. 4,5t

Price on request

Poland

GILDEMEISTER CTX 400 E cnc lathe Sold

Year: 1992

Turning Ø: over bed 500 mm gr rotation Ø.: gr turning length:. 600 mm Spindle bore: 72 mm Spindle speeds: 25 - 5000 rpm Number of toolholders: 12 Rapid traverse the x-axis: 10 m / min Rapid z-axis: 15 m / min Spindle drive: 22 kW Space: 4500 x 2000 x 2500 mm well preserved CNC lathe, 32 887 under power, equipped with tool drives the turret control EPL 2 (SIEMENS) Equipment compl. elec. u. hydr. Equipment, coolant system, chip …

Price on request

Germany

GILDEMEISTER CTX 400 E cnc lathe Sold

Year: 1997

DIAM TO WORK ON BENCH 570 MM DIAM LOVARABILE GUIDE ON CROSS 420 MM CROSS RACE 220MM LONGITUDINAL STROKE 635 MM DIAM HEAD PORTAMNEDRINO 170 H5 HOLE MANDREL 79 MM DIAM TIGHTENING CHUCK 210MM DRIVING FORCE 21 KW MAXIMUM TORQUE 240 NM FIELD SYSTEM 25 5000 RPM FORCE AVANZAMENTE AXIS X 3.5 FORCE AVANZAMENTE Z AXIS 7 KN SPEED 'RUN FAST X 20 M MIN SPEED 'RUN FAST Z 24 M MIN SCREW CLUB BALL Z X 32 X 10 …

Price on request

Italy

GILDEMEISTER CTX 400 cnc lathe Sold

Year: 1995

AXIS C-C.UT.12 POS.-UTENSILI.MOTORIZZATI Ranked # 6 Center height: 420 mm Spindle speed: 5000 rpm / 1 'Motor power: 28 kw

Price on request

Italy

GILDEMEISTER CTX 400 cnc lathe Sold

Year: 1996

3 axes, motorized axis C Heidenhain control

Price on request

Italy

GILDEMEISTER CTX 400 cnc lathe Sold

Year:

Machine parameters: - head 12 - gear on the holder 30 VDI - maximum torque. 5000 / min. - the power of the drive spindle 22 KW - max Wed. of turned. X = 500mm - l max. Of turned. Z = 640mm - hydraulic chuck on the main spindle-fi 200mm - through spindle 72mm-Fi - cooling system - hydraulic tailstock - chip conveyor - full programming guide - DTR - machine weight: 5.2 tons EXTRA EQUIPMENT: - 1 x …

Price on request

Poland

Gildemeister CTX 400 cnc lathe Sold

Year: 1994

→ swing diameter: 500 mm → distance between centers: 640 mm → control: Gildemeister EPL 2 → face travel: 212 mm → chuck diameter: 200 mm → speed: 1-4000rpm → connection: 380V 7.5 KW

Price on request

Germany

Gildemeister CTX 400 cnc lathe Sold

Year:

Brand: Gildemeister Type: CTX 400 Controls: EPL turning diameter: 500 mm Turning length: 640 mm

Price on request

Netherlands

Gildemeister Ctx 400 cnc lathe Sold

Year:

ontrol of ELTROPILOT Control Turning Diameter 500 / 290mm, turning 640mm, 12ATC magazine, through spindle 72mm, rpm 5000rpm, tailstock, probe, chip conveyor additionally a lot of frames, The machine is in very good condition!

Price on request

Poland

Gebrauchte CNC-Drehmaschine GILDEMEISTER CTX 400 Sold

Year: 1998

Drehdurchmesser: ca.350 mm. Länge: 600 mm. Spanndurchmesser: 250 mm. Antrieb: 21 KW

Price on request

Germany

Gildemeister CTX 400 cnc lathe Sold

Year:

Height of centres: 420 mm Distance between centres: not available Spindle/plateau diam.: not available Max.Swing height: not available Spindle speed: 5000 rpm Motor power: 28 kw CNC: ALTRO/OTHER Spindle bore: 65 mm Max.swing diam.: not available CNC ELTROPILOT DIN PLUS -C AXIS-TOOLS CHANGER 12 POS.-N.6 LIVE TOOLS

Price on request

Italy

Gildemeister CTX 400 E cnc lathe Sold

Year: 1997

Control system Heidenhain : CNC pilot Turn table diameter : 420 mm Turning lenght : 635 mm Sloping bed : true Spindle bore : 79 mm Travel X-axis : 220 mm Travel Z-axis : 635 mm Spindle speed : 25 - 5000 /min. Machine weight : 4300 kg The machine is in good technical condition, under power, it can be tested.

Price on request

Czech Republic

Used Gildemeister CTX 400 cnc lathe Sold

Year:

Control: Control ELTROPILOT turning diameter: 500 / 290mm, turning length: 640mm, magazine 12ATC, through spindle: 72mm, RPM 5000rpm, tailstock, probe chip conveyor, additionally a lot of tools, The machine is in a very goodcondition!

Price on request

Poland

Gildemeister CNC Drehmaschine CTX 400 Sold

Year: 1993

Steuerung : EPl 2 C Achse, angetriebene Werkzeuge, Drehlänge 640 mm, Umlauf Bett 500 mm, Revolver 12 fach, Dreibackenfutter, Spannzangenfutter, Stangenvorschub, Reitstock, 8 angetr. Wz Halter, Späneförderer

Price on request

Germany

Gildemeister CTX 400 Drehmaschine - CNC Sold

Year: 2000

Gildemeister CTX 400 Drehmaschine - CNC

Price on request

Germany

GILDEMEISTER CTX 400 S2 Cnc lathe Sold

Year: 2001

turning diameter 570 mm turning length 635 mm control Heidenhain CNC Pilot 3190 turning diameter over bed slide 420 mm spindle turning speed - stepless 25-5000 U/min spindle bore 79 mm rapid travel - longitudinal/face 20 m/min number of driven tools 6 mm milling drive 5 kW tailstock taper MT 4 tailstock quill diameter 80 mm main drive 21 kW total power requirement 30 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,3 x 1,8 …

Price on request

Germany

Gildemeister CTX 400 S2 cnc lathe Sold

Year: 1997

Workpiece diameter max. 240 mm Workpiece length max. 600 mm Revolver VD30 12 specialist Space needs about L: 4.3 x D: 1.8 x 2.0 m accessories Chip conveyor, 3-jaw chuck, coolant system, 53 sets of jaws with base jaws, 26 Werzeughalter, various measuring instruments, Operating instructions.

Price on request

Germany

GILDEMEISTER CTX 400 CNC lathe Sold

Year: 1999

Price on request

Italy

Gildemeister CTX 400 Drehmaschine - CNC Sold

Year: 1991

Gildemeister CTX 400 Drehmaschine - CNC

Price on request

Germany

Used GILDEMEISTER CTX 400 E Cnc lathe Sold

Year: 1997

Price on request

Germany

Gildemeister CTX 400 E cnc lathe Sold

Year: 1998

accessories not included

Price on request

Switzerland

Gildemeister CTX 400 S2 cnc lathe Sold

Year: 2001

This Gildemeister CTX 400 S2 lathe was manufactured in 2001. It features a Heidenhain CNC control system, a turning diameter max of 400 mm, and a turning length max of 600 mm. Equipped with a tailstock with quill, collet chuck, two-jaw chuck, four-jaw chuck, bar loader, and 9 attached tool holders. The spindle bore is 78 mm. Ideal for precision tasks, the Gildemeister CTX 400 S2 machine we have for sale. Contact us for further details regarding this lathe. CNC: …

Price on request

Germany

GILDEMEISTER CTX 400 E cnc lathe Sold

Year: 1997

Description Swing over bed 570 mm Swing over slide 420 mm Length movement 635 mm Spindle bore (main) 79 mm Spindle speeds (main) 25-5000 rpm Spindle bore (sub) 56 mm Spindle speeds (sub) 25-5000 rpm Movement subspindle 575 mm Turret w/12 stations C-axis/rotating tools Control: Heidenhain / Eltropilot Equipped with: Magazine barfeeder Iemca VIP 80 E - 2004 8 rotating tools Various tool holders Chip conveyor this extra information is standard for this model. Please always double-check the details during …

Price on request

Denmark

Gildemeister CTX 400 E cnc lathe Sold

Year: 1999

This GILDEMEISTER CTX 400 E (1999) Lathe was manufactured in the year 1999 in Germany. It is equipped with a HEIDENHAIN CNC controller and a single driven tool. CNC: Heidenhain Spindle motor power: 44 kW Working width: approximately 635 mm Single driven tool Through-hole diameter of ø50 mm through the head

Price on request

Slovenia

Gildemeister CTX 400 E

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?

Turning length	600 mm
Turning Ø	420 mm
Ø above the bed	500 mm
Ø above transversing slide	290 mm
Length between centers	600 mm
Type of CNC	EPL 2
X-axis	220 mm
Z-axis	635 mm
Spindle taper
Spindle bore	72 mm
Number of turrets	1
Number of tools on turret	12
Number of rotating tools	6
Turning speed	5000 rpm
Spindle motor power	22 kW
Tailstock	no
Bar feeder	no
-------------------
Length x width x height	4300.0 × 1800.0 × 1750.0
Weight	5500 kg