Machine's specifications - Haas VF-3 Used machines

Manufacturer	Haas
Model	VF-3
Category	Machining centers - vertical

Haas VF-3 cnc bed type milling machine Sold

Year: 2004

HAAS CNC milling machine, 2004. VF-3 model with 4 axle Haas (FANUC) Control table 1219mm x 457mm scope of work X-1016mm Y-508mm Z-635mm BT-40, 7500rpm, 20ATC warehouse, nozzle progr chip conveyor

Price on request

Poland

Used Haas VF-3. Cnc Vertical Machining Centre, w/ Haas Control Sold

Year: 1993

Specifications: Control........ Haas Max Table Weight........ 4,000 Lbs X-Axis Travel........... 40 Y-Axis Travel............. 20 Z-Axis Travel........... 25 Spindle Motor..... 15 HP Rapid Traverse Rates....... 500 IPM Cutting Feed Rates........... 200 IPM Tool Changer...... 20 Carousel Index Time Tool to Tool............. 4.0 Sec Index Time Chip to Chip......... 5.4 Sec Equipped With: Quick Code Rigid Tap

Price on request

USA

Haas VF-3 cnc vertical milling machine Sold

Year:

Haas Control (FANUC) Control Table 1219mm x 457mm Work range X-1016mm Y-508mm Z-635mm BT-40, 7500rpm, 20ATC magazine, Progr nozzle Chip conveyor, Cooling through the spindle, The machine is in very good condition

Price on request

Poland

Haas VF-3 CNC Vertical Machining Center Sold

Year: 2004

Haas VF-3 CNC Vertical Machining Center Technical Specifications TRAVELS Metric X Axis 1016 mm Y Axis 508 mm Z Axis 635 mm Spindle Nose to Table (~ min) 102 mm Spindle Nose to Table (~ max) 737 mm T-Slot Width 16 mm T-Slot Center Distance 80.0 mm Number of Std T-Slots Max Weight on Table (evenly distributed) 1588 kg SPINDLE Metric Max Rating 14.9 kW Max Speed 7500 rpm Max Torque 102 Nm @ 1400 rpm Drive System Max Torque …

Price on request

Canada

Used HAAS VF-3 Cnc vertical milling machine Sold

Year: 2002

Traverses XYZ: 1016 x 508 x 635mm Table Size:1219 x 457mm Spindle Speed:10000 rpm Spindle Motor Power: 11kW Spindle Taper: BT40 Control: HAAS Tool Change Capacity: 40 side arm ATC Additional Equipment: HRT210 4th axis Description: Coolant, Low Volt Light, Programmable Coolant Nozzle, Manuals, Tooling, 4 Axis.

Price on request

Poland

Used HAAS VF-3 CNC vertical milling machine Sold

Year: 1997

Please inquire if you wish to receive additional information. Thanks

Price on request

USA

Used HAAS, Model VF-3 Vertical machining centre. Sold

Year: 1997

SPECIFICATIONS: SPINDLE NOSE TO TABLE: 4 - 29" MAX WEIGHT ON TABLE: 3,500 LBS T-SLOTS T-SLOTS WIDTH: .625" CENTER DISTANCE: 3.15" SPINDLE TAPER SIZE: #40 TAPER SPEED: 0 - 7500 RPM TRANSMISSION: 2-SPEED GEARED HEAD MAX. TORQUE (ft-lb @ rpm): 250 FT-LB @ 450 RPM BEARING LUBRICATION: AIR/OIL INJECTION COOLING: LIQUID COOLED SPINDLE MOTOR MAX RATING (INTERMITTENT DUTY RATING): 15 HP VECTOR DRIVE AXIS MOTORS MAX RATING (INTERMITTENT DUTY RATING): 5 HP AXIS MOTORS MAX THRUST RATING: 3,400 LBS FEEDRATES …

Price on request

USA

Used HAAS VF-3 Vertical machining centre Sold

Year: 1995

CARRERAS: 43 X 18 X 20” (1,050 X 450 X 500 mm) POTENCIA: 11 KW (15 HP) EN EL HUSILLO VELOCIDAD: 7,500 RPM EN EL HUSILLO CAMBIADOR: SOMBRILLA (20 HERRAMIENTAS)

Price on request

Mexico

USED HAAS VF-3 CNC VERTICAL MACHINING CENTER Sold

Year: ~ 1996

40"x ,20"y ,25"z, Haas cnc, 4th axis, 48"x18"tbl, 710IPM, 20ATC,

Price on request

USA

Used HAAS Model VF-3 CNC Lathe Sold

Year: 1994

TABLE SIZE 48" x 18" MAXIMUM PALLET LOAD 3,000 LBS SPINDLE NOSE TO PALLET TOP 4" - 29" X AXIS TRAVEL 40" Y AXIS TRAVEL 20" Z AXIS TRAVEL 25" RAPID TRAVERSE RATE X, Y & Z AXES 500 IPM SPECIFICATIONS : CUTTING FEED RATE 0.1 - 300 IPM SPINDLE TAPER CAT 40 SPINDLE SPEEDS (2 SPEED GEARED) 0 - 7,500 RPM SPINDLE MOTOR 15 HP TOOL CHANGER CAPACITY 20 STATION ATC MAXIMUM TOOL WEIGHT 12 LBS Equipped With: HAAS …

Price on request

USA

Used HAAS, Model VF-3. Vertical machining centre Sold

Year: 1997

Specifications HAAS CNC CONTROL TABLE SIZE: 48" X 18" 15 HP HIGH TORQUE SPINDLE 7,500 MAXIMUM RPM 20 POSITION TOOL CHANGER CAT 40 TAPER CHIP AUGER PROGRAMMABLE COOLANT FLOPPY DISC DRIVE WIRED FOR 4TH AXIS

Price on request

USA

Used HAAS, Model VF-3. Vertical machining centre, W/PALLET SHUTTLE Sold

Year:

Specifications HASS CNC CONTROL TRAVELS: 40" X 20" X 25" 20 HP HIGH TORQUE SPINDLE MOTOR 7,500 RPM GEAR BOX 2 PALLET 40" X 19" 20 POSITION TOOL CHANGER PROGRAMMABLE COOLANT RIGID TAP

Price on request

USA

Used HAAS, Model VF-3. Vertical machining centre Sold

Year: 2003

Specifications HAAS CNC CONTROL TRAVELS: 40" X 20" X 25" Z TABLE: 48" x 18" HP - 20 10,000 MAX RPM 20 POSITION TOOL CHANGER PROGRAMMABLE COOLANT FLOPPY DRIVE RIGID TAP 4TH AXIS READY CHIP AUGER HIGH SPEED MACHINING, QUICK CODE

Price on request

USA

Used Haas, Model VF-3. Vertical machining centre Sold

Year: 1996

Control: Haas X Axis Travel: 40" Y Axis Travel: 20" Z Axis Travel: 25" Spindle Taper: 40 Spindle Speed: 7500 RPM Spindle Motor: 15 HP Tool Capacity: 20 ATC Machine Weight: 12,500 LBS

Price on request

USA

Used Haas, Model VF-3. Vertical machining centre Sold

Year: 1996

Specifications Control: Haas X Axis Travel: 40" Y Axis Travel: 20" Z Axis Travel: 25" Spindle Motor: 15 HP Tool Capacity: 20 ATC

Price on request

USA

Used HAAS, Model VF-3. Vertical machining centre Sold

Year: 2000

Equipped with: All cast iron construction Brushless servo amplifiers and servo motors on all axes Brushless servo amplifier for fourth-axis rotary table HAAS four-axis CNC control with manual pulse generator, 3.5" floppy disc drive (on pendant), RS-232 port, dual 32-bit processors, and 1 MB extended memory Twenty-four position side-mount automatic toolchanger Two-speed gear box Programmable coolant nozzle Telescopic way covers Chip auger Rigid Tapping Visual Quick Code Macro Code Coordinate Rotation/Scaling Work light Automatic BIJUR lubrication system External coolant pump …

Price on request

USA

Used HAAS, Model VF-3. Vertical machining centre Sold

Year: 2005

PRELIMINARY SPECIFICATIONS 48" X 18" TABLE 40" X-AXIS 20" Y-AXIS 25" Z-AXIS 1500LBS MAX TABLE WEIGHT 20/15HP SPINDLE MOTOR VECTOR DRIVE 20 STATION AUTOMATIC TOOL CHANGER EQUIPPED WITH HAAS 32-BIT CNC CONTROL RS-232C PORT INTERFACE FOR DNC OPERATION RIGID TAPPING CHIP AUGER 2 SPEED GEAR BOX 1 MEG MEMORY QUICKVODE PROGRAMMING SYSTEM 3.5" FLOPPY DISK DRIVE PROGRAMMABLE COOLANT THROUGH SPINDLE COOLANT SPINDLE ORIENTATION 55 GALLON STANDARD COOLANT SYSTEM WITH TANK & PUMP FULLY ENCLOSED GUARDS

Price on request

USA

Used HAAS VF-3. CNC VERTICAL MACHINING CENTER, w/ Haas 32-Bit Cnc Control Sold

Year: 1994

Specifications MAXIMUM TABLE LOAD.................. 3,500 LBS SPINDLE NOSE TO TABLE TOP .......... 4" - 29" X AXIS TRAVEL....................... 40" Y AXIS TRAVEL....................... 20" Z AXIS TRAVEL....................... 25" RAPID TRAVERSE RATE X AXIS.......... 500 IPM RAPID TRAVERSE RATE Y AXIS.......... 500 IPM RAPID TRAVERSE RATE Z AXIS.......... 500 IPM CUTTING FEED RATE................... 0.1 - 200 IPM SPINDLE MOTOR (VECTOR DRIVE)........ 15 HP AC TOOL CHANGER CAPACITY............... 20 STATION ATC MAXIMUM TOOL WEIGHT ................ 12 LBS ****EQUIPPED WITH**** HAAS 32-BIT CNC CONTROL …

Price on request

USA

Used Haas VF-3 Vertical machining centre 1997 Sold

Year: 1997

Specification / Description SPECIFICATIONS Control Haas Table Size 48" x 18" Max. Table Load 3,500 LBS X Axis Travel 40" Y Axis Travel 20" Z Axis Travel 25" Spindle Nose to Table Top 4" - 29" Spindle Taper CAT 40 Spindle Speed 10,000 RPM Spindle Motor 15 HP Tool Changer 20 Position Machine Weight 12,500 LBS Machine Dimensions 118" L x 110" W x 117" H Equipped With: EQUIPPED WITH 10K Spindle 2-Speed Gearbox 4th Axis Pre-Wire Rigid Tap Rotation …

Price on request

USA

Used Haas, Model VF-3. Cnc Vertical machining centre Sold

Year: 1997

Specifications: Table Size: 48"X18" X Axis Travel: 40" Y Axis Travel: 20" Z Axis Travel: 25" Spindle Horsepower: 15 HP Rapid Traverse Rate: 710 IPM Automatic Tool Changer: 20+1 Equipped With: 2 Speed Gearbox 4th Axis Pre-Wire Rigid Tap Custom Macros Coordinate Rotation and Scaling Spindle Orientation Haas Quick Code Custom Macros Chip Auger 3.5" Floppy Drive Brushless Servos

Price on request

USA

Used Haas, Model VF-3. Cnc Vertical machining centrem, w/ Chip Auger Sold

Year: 1994

Equipped with Programmable Coolant Operating Condition: Good

Price on request

USA

Used HAAS, Model VF-3. Cnc Vertical Machining Centre Sold

Year: 1994

SPECIFICATIONS: TABLE DIMENSIONS................. 48" X 18" X-AXIS TRAVEL.................... 40" Y-AXIS TRAVEL.................... 20" Z-AXIS TRAVEL.................... 25" SPINDLE MOTOR.................... 15 HP TOOLING.......................... 20 ATC UMBRELLA CHANGER EQUIPPED WITH: 8" HRT210 ROTARY TABLE TAILSTOCK CHIP AUGER PROBE READY MACROS ROTATION & SCALING FLOPPY DRIVE RIGID TAPPING

Price on request

USA

Used HAAS VF-3 Vertical machining centre Sold

Year:

Min./Max. Spindle Nose to Table..... 4 - 29" T-Slot Width............. 5/8" T-slot Center Distance.......... 3.15" Number of T-slots........... 5 Max. Weight on Table......... 3500 # Max. Rating............. 20 HP Vector Drive Max. Torque............. 75 Ft. Lb. @ 1400 RPM Equipped With: Drive System: Direct Speed Belt Drive 1000 IPM 20-Station Carousel Tool Changer 1 MB Program Memory 15" color LCD Monitor USB Port Rigid Tapping 55 Gallon Fluid Coolant System 40 Taper Haas Control

Price on request

USA

HAAS VF-3 vertical machining centre Sold

Year: 1995

Model: VF-3 Traverses XYZ: 1016 x 508 x 635mm Table Size: 1219 x 457mm Spindle Speed: 7500 rpm Spindle Motor Power: 15Hp Spindle Taper: BT40 Control: HAAS Tool Change Capacity: 20 Description: Coolant, Low Volt Light, Programmable Coolant Nozzle, Manuals

Price on request

United Kingdom

Used HAAS VF-3. Cnc Vertical Machining Centre, w/ Chip Auger Sold

Year: 2000

SPECIFICATIONS: X AXIS 40 " Y AXIS 20 " Z AXIS 25 " MAX WEIGHT ON TABLE (EVENLY DISTRIBUTED) 3500 LB SPINDLE: MAX RATING 20 HP MAX TORQUE 75 FT-LB @ 1400 RPM DRIVE SYSTEM DIRECT SPEED BELT DRIVE MAX TORQUE W/OPT GEARBOX 250 FT-LB @ 450 RPM RAPIDS ON X,Y,Z 1000 IN/MIN MAX CUTTING 650 IN/MIN TOOL CHANGER CAPACITY 20 MAX TOOL DIAMETER (FULL) 3.5 " MAX TOOL WEIGHT 12 LB POSITIONING (+/-) 0.0002 " REPEATABILITY (+/-) 0.0001 " …

Price on request

USA

Used HAAS VF-3. Cnc Vertical Machining Centre, w/ Haas 4th Axis Cnc Control Sold

Year: 2001

Specifications: X-AXIS TRAVEL ........................ 40" Y-AXIS TRAVEL ........................ 20" Z-AXIS TRAVEL ........................ 25" MAX. TABLE LOAD ...................... 3,500 LBS SPINDLE MOTOR (VECTOR DRIVE) ......... 20 HP TOOL CHANGER CAPACITY ................ 20 ATC EQUIPPED WITH: * HAAS 4TH AXIS CNC CONTROL * 4TH AXIS READY * CHIP AUGER * PROGRAMMABLE COOLANT * FLOPPY DISK * REMOTE JOG HANDLE * ROTATION SCALING, MACROS, SPINDLE ORIENTATION QUICK CODES

Price on request

USA

Used Haas VF-3. Cnc Vertical Machining Centre Sold

Year: 1996

SPECIFICATIONS: X AXIS TRAVEL: 40" Y AXIS TRAVEL: 20" Z AXIS TRAVEL: 25" SPINDLE MOTOR: 15 HP TOOL CAPACITY: 20 ATC

Price on request

USA

Used HAAS VF-3. Vertical Machining Centre, w/ Programmable Coolant Sold

Year: 2000

Specifications Maximum Table Load ................... 3,500 LBS Travels: X-Axis Travel ............... 40" Y-Axis Travel ........................ 20" Z-Axis Travel ........................ 25" Spindle Nose to Table Top ............ 4" - 29" Main Motor ........................... 20 HP Tool Changer: Tool Changer Position... 20 ATC Rapids: Rapid Traverse ............... 710 IPM Cutting Feed Rate .................... 500 IPM Additional Info.: 4th Axis Interface Rigid Tapping Chip Auger 3.5" Floppy Drive Programmable Coolant Quick Code Programming Coordinate Rotation and Scaling Spindle Orientation Software Version 9.9 N …

Price on request

USA

Used HAAS VF-3. Cnc Vertical Machining Centre, w/ Haas CNC Control Sold

Year: 2004

MACHINE SPECS: CONTROL: HAAS TRAVELS: 40" X 20" X 25" MAIN MOTOR: 20HP ATC POSITION: 20 EQUIPPED WITH INDEXER OR ROTARY TABLE: YES EQUIPPED WITH 5-AXIS CAPABILITY: YES EQUIPPED WITH: Haas CNC Control 2 Speed Gear Box Haas Trunnion Table

Price on request

USA

Used Haas VF-3. Cnc Vertical Machining Centre, w/ Programmable Coolant Sold

Year: 1993

Specifications Travel 40 x 20 x 24 Tools 20 ATC Control Haas Horsepower 15 Table 48"x18" Equipped with Gear Box Programmable Coolant 4th Axis Wiring Chip Auger Rigid Tapping

Price on request

USA

Used Haas VF-3. Cnc Vertical Machining Centre, w/ Gear Box Sold

Year: 1995

Specifications Travels 40x20x24 Tools 20 ATC Control Haas Horsepower 15 Voltage 208-230 Spindle Hours 1868 On Hours 8508 Equipped with Floppy Rigid Tap 4th Wire P-Cool Spindle Orientation Gear Box

Price on request

USA

Used Haas VF-3. Cnc Vertical Machining Centre, w/ Haas CNC Control w/ CRT Sold

Year: 1997

Specifications Max Load 3,500 Lbs Travels: X-Axis 40" Y-Axis 20" Z-Axis 25" Nose to Table Top 4" * 29" Motor 15 HP Rapid Traverse Rates 710 IPM Tool Changer: Type Carousel Stations 20 + 1 Equipped With: Haas CNC Control w/ CRT Programmable Coolant 4th Axis Pre Wire Custom Macros Coordinate Rotation & Scaling Haas Quick Code 3 1/2" Floppy Drive Rigid Tapping Chip Auger

Price on request

USA

Used Haas VF-3. Cnc Vertical Machining Centre, w/ Through Spindle Coolant Sold

Year: 2011

Specifications Travels 40x20x25 Tools 20 Tool Changer Control Haas Horsepower 30 Equipped with Through Spindle Coolant Probes Rigid Tapping Chip Auger Gear Box

Price on request

USA

Used HAAS VF-3. Cnc Vertical Machining Centre, w/ Haas 32-Bit Cnc Control Sold

Year: 1998

Specification MAX. TABLE LOAD (EVENLY DISTRIB.) 3500 LBS SPINDLE NOSE TO TABLE TOP 4" - 29" X AXIS TRAVEL 40" Y AXIS TRAVEL 20" Z AXIS TRAVEL 25" RAPID TRAVERSE RATE ALL AXES 710 IPM CUTTING FEED RATE ALL AXES 0.1 - 300 IPM SPINDLE MOTOR 20 HP TOOL CHANGER CAPACITY 24+1 STATIONS MAX. TOOL WEIGHT 12 LBS Equipped With: HAAS 32-BIT CNC CONTROL WITH 9" AMBER CRT RIGID TAPPING (SYCHRONIZED/SOLID TAPPING) RS-232C PORT INTERFACE FOR DNC OPERATION CAT 40 …

Price on request

USA

Used Haas VF-3. Vertical Machining Center, w/ Programmable Coolant Nozzle Sold

Year: 1998

Specifications Control: Haas X Axis Travel: 40" Y Axis Travel: 20" Z Axis Travel: 25" Max Table Load: 3,500 LBS Spindle Motor: 20 hp Tool Capacity: 24 ATC -EQUIPPED WITH- Pre-Wired for 4th Axis Haas 11" Rotary Table Rigid Tapping Programmable Coolant Nozzle Chip Auger **Low Hours, Never Used In Production**

Price on request

USA

HAAS VF-3 vertical machining centre Sold

Year: 2008

Control: HAAS Spindle Motor Power: 20Hp Spindle Speed: 7500rpm Spindle Taper: BT40 Tool Change Capacity: 20 Station Traverses XYZ: 1016 x 508 x 635mm Table Size: 1219 x 457mm Additional Equipment: High pressure coolant Description: Through Spindle Coolant, Coolant, Interlocked guards, Low Volt Light, Programmable Coolant Nozzle, Manuals, Swarf Auger

Price on request

United Kingdom

Used 1999 Haas VF-3 Vertical Machining Center Sold

Year: 1999

HAAS CNC CONTROL TABLE: 48" X 18" TRAVELS(X, Y, Z): 40" X 20" X 25" SPINDLE NOSE TO TABLE TOP: 4" - 29" 20 POSITION TOOL CHANGER - CAT 40 20HP - 7,500 RPM EQUIPPED WITH: CHIP AUGER RIGID TAP 1MB MEMORY

Price on request

USA

Used 1996 Haas VF-3 Vertical Machining Center Sold

Year: 1996

Control........... Haas Table Size......... 48" x 18" Max Table Load.......... 3,500 lbs X-Axis Travel.......... 40" Y-Axis Travel.......... 20" Z-Axis Travel....... 25" Spindle Nose to Table Top...... 4" – 29" Spindle Taper.......... CAT 40 Spindle Speed......... 7,500 RPM Spindle Motor....... 15 HP Tool Changer....... 20 Position Machine Weight...... 12,500 lbs Machine Dimensions......... 118"L x 110"W x 117"H 2 Speed Gearbox Programmable Coolant 3.5” Floppy Drive Haas Quick Code Rigid Tapping 4th Axis Pre-wire Quick Code Programming

Price on request

USA

HAAS VF-3 Vertical machining centre Sold

Year: 2001

Control............. Haas Table Size......... 48" x 18" Max Table Load.......... 3,500 lbs X-Axis Travel......... 40" Y-Axis Travel......... 20" Z-Axis Travel............ 25" Spindle Nose to Table Top.......... 4" – 29" Spindle Taper.......... CAT 40 Spindle Speed.......... 7,500 RPM Spindle Motor............ 20 HP Rapid Traverse Rates.......... 710 IPM Tool Changer........... 32 ATC Machine Weight.......... 12,500 lbs Machine Dimensions..... 118"L x 110"W x 117"H

Price on request

USA

Used HAAS VF-3 Vertical machining centre Sold

Year: 1996

Rapids: Rapid Traverse: 710 IPM Cutting Feed Rate: 300 IPM Equipped With: Haas 32 Bit Control 1 MB Memory Programmable Coolant Nozzles Chip Auger 4th Axis ready Brushless Servos Macros Coordinate Rotation and Scaling Floppy Drive Quick Code

Price on request

USA

HAAS VF-3 Machining center - vertical Sold

Year: 2008

2008 HAAS VF-3 Travel: X-Axis 40" Y-Axis 20" Z-Axis 25" Table Size 48" x 18" Spindle Speed 7500 RPM Spindle Taper Cat 40 Spindle Nose to Table Top 4" - 29" Spindle Torque 250 ft. lbs. Spindle Motor 20 HP Tools 24 Table Load Capacity 3500 lbs. Rapid Traverse Rates 710 IPM Max Tool Diameter 3.5" Max Tool Length 13" Max Tool Weight 12 lbs. Machine Dimensions (L x W x H) 118" x 110" x 119.5" Machine Weight 12,500 …

Price on request

USA

Used HAAS VF-3 Machining center - vertical Sold

Year: 1993

Year: 1993 Technical data : - The size of the working table: 1020 x 510 mm - Operating range of X, Y, Z: 1016 x 508 x 635 mm

Price on request

Poland

Used HAAS VF-3 Machining center - vertical Sold

Year: 1996

SPECIFICATIONS: Control Haas Table Size 48" x 18" Max Table Load 3,500 lbs X-Axis Travel 40" Y-Axis Travel 20" Z-Axis Travel 25" Spindle Nose to Table Top 4" – 29" Spindle Taper CT 40 Spindle Motor 15 HP Spindle Speed 7,500 RPM Tool Changer 20 Position Machine Weight 12,500 lbs EQUIPPED WITH: Haas CNC Control 2-Speed Gearbox Rigid Tap 4th-Axis Ready Brushless Servos Programmable Coolant Chip Auger Quick Code 3.5" Floppy (Can Convert To USB) RS-232 Port

Price on request

USA

Used HAAS VF-3 Machining center - vertical Sold

Year: 1998

SPECIFICATIONS: Control Haas Table Size 48" x 18" Max Table Load 3,500 lbs X-Axis Travel 40" Y-Axis Travel 20" Z-Axis Travel 25" Spindle Taper CT 40 Spindle Motor 20 HP Spindle Speed 7,500 RPM Tool Changer 32 Position Machine Weight 12,500 lbs EQUIPPED WITH: 32 Position ATC 2-Speed Gearbox Chip Auger Rigid Tap 4th Axis Pre-Wire Programmable Coolant Nozzle Coordinate Rotation & Scaling Custom Macros 3.5” Floppy Quickcode 4 MB Expanded Memory 1000 Blocks Per Second Processing

Price on request

USA

Haas Vf-3 Machining center - vertical Sold

Year: 1998

Haas Control ( FANUC) Control table 1219mm x 508mm work range X-1016mm Y-508mm Z-635mm BT-40, 7500rpm, 20ATC magazine, nozzle chip conveyor The machine is in very good condition!

Price on request

Poland

Haas VF-3 Machining center - vertical Sold

Year: 2015

SPECIFICATIONS: Control Haas Table Size 48" x 18" Max Table Load 3,500 lbs X-Axis Travel 40" Y-Axis Travel 20" Z-Axis Travel 25" Spindle Taper CT 40 Spindle Motor 30 HP Spindle Speed 8,100 RPM Tool Changer 24+1 Position Machine Weight 12,500 lbs EQUIPPED WITH: 24+1 Side-Mount ATC Chip Auger Rigid Tap Programmable Coolant Nozzle USB Port Coolant Tank & Pump

Price on request

USA

Haas VF-3 Machining center - vertical Sold

Year: 2018

SPECIFICATIONS: Table Size / Max Table Load 48” x 18” / 3,500 Lbs X-Axis Travel 40” Y-Axis Travel 20” Z-Axis Travel 25” Spindle Speed 30,000 RPM Spindle Taper BT-30 Spindle Motor 20 H.P Tool Changer Style / Stations Sidemount / 24 + 1 EQUIPPED WITH: Haas CNC Control 30,000 RPM High Speed Spindle W.I.P.S / Wireless Intuitive Probe System Programmable Coolant 55 Gallon Coolant Tank Automatic Air Gun High Intensity Lighting High Speed Machining, Visual Programming System, Rigid Tapping, Macros, …

Price on request

USA

Haas VF-3 Machining center - vertical Sold

Year: 2005

SPECIFICATIONS: Control Haas Table Size 48" x 18" X-Axis Travel 40" Y-Axis Travel 20" Z-Axis Travel 25" Spindle Nose to Table Top 4" – 29" Spindle Taper CT 40 Spindle Speed 10,000 RPM Spindle Motor 20 HP Tool Changer 24+1 Side-Mount EQUIPPED WITH: 2-Speed Gear Box w/ 10,000 RPM Spindle 24+1 Side-Mount Tool Changer Chip Auger Programmable Coolant Nozzle 1 MB Quickcode Programming Rigid Tap 3.5” Floppy Drive 4th Axis Pre-Wire Coordinate Rotation & Scaling Remote Jog Handle Custom Macros …

Price on request

USA

Haas VF-3 Machining center - vertical Sold

Year: 1995

Machine Type: CNC Verticals Year: 1995 Manufacturer: Haas Model: VF-3 Control: Haas 32 BIT/CRT Condition: Used Table: Table Size: 48" x 18" Maximum Table Load: 3,500 lbs Travels: X-Axis Travel: 40" Y-Axis Travel: 20" Z-Axis Travel: 25" Spindle Nose to Table Top: 4" - 29" Spindle: Spindle Speeds: 0 - 7,500 RPM Spindle Taper: 40 Taper Main Motor: 15 HP Tool Changer: Tool Changer Positions: 20 ATC Rapids: Rapid Traverse: 710 IPM Cutting Feed Rate: 300 IPM Dimensions: Floor Space …

Price on request

USA

HAAS VF-3 Machining center - vertical Sold

Year: 2003

Control HAAS Max & Min distance from table to spindle 102 - 737mm Table Size 1219 x 457mm Traverses XYZ 1016 x 508 x 635mm Rapid Feedrates 18m/minute Spindle Motor Power 20Hp Spindle Speed 7500rpm Spindle Taper BT40 Tool Change Capacity 20 Machine Dimensions 3526 x 2794 x 3035mm Machine Weight 5670kg

Price on request

United Kingdom

Haas VF-3 Machining center - vertical Sold

Year: 2009

Coolant, Tailstock, Interlocked guards, 4th axis Rotary Table, Low Volt Light, Programmable Coolant Nozzle, Remote Hand Wheel, Swarf Auger Control HAAS Max & Min distance from table to spindle 102 - 737mm Table Size 1219 x 457mm Traverses XYZ 1016 x 508 x 635mm Rapid Feedrates 18m/minute Spindle Motor Power 20Hp Spindle Speed 7500rpm Spindle Taper BT40 Tool Change Capacity 20 A axis Unit HRT310 Machine Dimensions 3526 x 2794 x 3035mm Machine Weight 5670kg

Price on request

United Kingdom

Haas VF-3 Machining center - vertical Sold

Year: 2013

The HAAS VF-3 vertical machining center was produced in 2013 by the renowned HAAS brand. The machine is equipped with Haas Control CNC control and has a magazine for 20 tools. The CNC milling spindle speed is 8000 rpm. The machine is used to quickly perform various types of machining tasks and significantly simplifies production, while also enabling the processing of materials of complex shapes. - control: HAAS CONTROL - table dimensions (L x W): 1219 x 457 mm - …

Price on request

Poland

Haas VF-3 cnc universal milling machine Sold

Year: 2002

HAAS CNC milling machine, 2002 VF-3 model Haas (FANUC) Control table 1219mm x 457mm scope of work X-1016mm Y-508mm Z-635mm BT-40, 7500rpm, 20ATC warehouse, nozzle progr chip conveyor, cooling through the spindle

Price on request

Poland

Used HAAS VF-3 Vertical machining centre Sold

Year: 2005

SPECIFICATIONS TRAVELS: X-AXIS: 40" Y-AXIS: 20" Z-AXIS: 25" TABLE SIZE: 48" X 18" SPINDLE SPEED: 10,000 RPM SPINDLE TAPERCAT: 40 SPINDLE NOSE TO TABLE TOP: 4" - 29" SPINDLE MOTOR: 15 HP SIDE MOUNT TOOL CHANGER: 24 MAX TOOL DIA/LENGTH/WT: 3.5" / 13" / 12# MACHINE DIMENSIONS (LXWXH): 118" X 110" X 119.5" APPRX EQUIPPED WITH HAAS CNC CONTROL PROGRAMMABLE COOLANT NOZZLE RIGID TAPPING CHIP AUGER 4TH AXIS READY GEARBOX SIDEMOUNT ATC P-COOL HIL 1 MB MEMORY FLOPPY DRIVE MACROS …

Price on request

USA

HAAS VF-3 V Machining center - vertical Sold

Year: 2005

Strokes mm.1016x508x635, table mm.1200x460, tool magazine with 20 stations, sk40, spindle revolutions 7500, chip conveyor. Year 2005 ce

Price on request

Italy

HAAS VF-3 Machining center - vertical Sold

Year: 2008

Travel: X-Axis 40" Y-Axis 20" Z-Axis 25" Table Size 48" x 18" Spindle Speed 7500 RPM Spindle Taper Cat 40 Spindle Nose to Table Top 4" - 29" Spindle Torque 250 ft. lbs. Spindle Motor 20 HP Tools 24 Table Load Capacity 3500 lbs. Rapid Traverse Rates 710 IPM Max Tool Diameter 3.5" Max Tool Length 13" Max Tool Weight 12 lbs. Machine Dimensions (L x W x H) 118" x 110" x 119.5" Machine Weight 12,500 lbs. FEATURES: HAAS …

Price on request

USA

Used Haas, Model VF-3. Vertical machining centre Sold

Year: 1995

Equipped With: Table Size 48" x 18" 25" Tool Positions 20 Carousel type Spindle Motor 15 HP Equipped With: Haas CNC Control Prewired for 4th Axis Chip Auger Full Enclosure

Price on request

USA

Used Haas VF-3. Vertical Machining Centre, w/ 32 Bit Haas Control Sold

Year: 1995

Specifications Control: Haas X Axis Travel: 40" Y Axis Travel: 20" Z Axis Travel: 25" Spindle Motor: 15 HP Tool Capacity: 20 ATC Equipped With- Reinshaw Probe 32 Bit Haas Control

Price on request

USA

Used HAAS VF-3 CNC vertical milling machine Sold

Year: 2000

Please inquire for further details. Thanks

Price on request

USA

Used HAAS VF-3. Vertical Machining Centre, w/ Haas Cnc Control Sold

Year: 1997

Specifications Travel: X-Axis 40" Y-Axis 20" Z-Axis 25" Spindle Nose to Table Top 4" - 29" Spindle Motor 15 HP Spindle Torque 250 ft. lbs. Tools 20 Table Load Capacity 3500 lbs. Rapid Traverse Rates 710 IPM Tool Change Time (T- T / C - C) 4.2 / 4.5 Seconds Max Tool Diameter 3.5" Max Tool Length 13" Max Tool Weight 12 lbs. FEATURES: HAAS CNC CONTROL 12" Monochrome CRT 3.5" Floppy Disc Drive Coolant Thru Spindle Fourth Axis Interface …

Price on request

USA

Used HAAS, Model VF-3. Vertical Machining Centre, w/ HAAS CNC Control Sold

Year: 1993

SPECIFICATIONS: Table Working Surface 18" x 48" Table Travel X-Axis 40" Table Travel Y-Axis 20" Vertical Column Travel Z-Axis 25" Minimum/Maximum Distance, Spindle Nose To Table 4"/29" Spindle drive motor 15 HP EQUIPPED WITH: HAAS CNC Control, Twenty Position Automatic Toolchanger and Coolant System With Complete Enclosure.

Price on request

USA

Used HAAS VF-3, Cnc Vertical Machining Centre, w/ 2 Speed Gear Box Sold

Year: 2008

.SPECIFICATIONS: X-AXIS TRAVEL............ 40" Y-AXIS TRAVEL............ 20" Z-AXIS TRAVEL............ 25" MAX TABLE LOAD........... 3,500 LBS RAPIDS (X,Y,Z)........... 710 IPM SPINDLE MOTOR............ 20 HP TOOLING.................. 20 ATC EQUIPPED WITH: 2 SPEED GEAR BOX RIGID TAP PROGRAMMABLE COOLANT 4TH AXIS BRUSHLESS HRT 160 ROTARY TABLE INTUITIVE PROGRAMMING AUTOMATIC AIR GUN ** NO AUGER, AVAILABLE AFTERMARKET FROM HAAS HOURS AS OF 7/2012 SERVO ON TIME - 7681 HRS IN MOTION TIME - 791 HRS SPINDLE TIME - 970 HRS

Price on request

USA

Used HAAS VF--3 Horizontal machining centre Sold

Year: 2008

Price on request

Poland

Used Haas VF-3. Cnc Vertical Machining Centre, w/ 2 Speed Gearbox Sold

Year: 1997

Specifications: X Axis Travel: 40" Y Axis Travel: 20" Z Axis Travel: 25" Spindle Horsepower: 15 HP Rapid Traverse Rate: 710 IPM Automatic Tool Changer: 20+1 Equipped With: 2 Speed Gearbox Programmable Coolant Chip Auger 4th Axis Prewire Custom Macros Rotation & Scaling Haas Quickcode Floppy Drive Rigid Tapping

Price on request

USA

HAAS VF-3 Sold

Year: 2011

Specifications Table Size (48”x18”) Table Load (Max) (3,500 LBS) X-Axis Travel (40”) Y-Axis Travel (20”) Z-Axis Travel (25”) Spindle Speed (8100 RPM) Spindle Taper (CT 40) Spindle Motor (30 HP) Tool Changer Style (Side Mount) Tool Changer Positions (20+1) Machine Dimensions (L x W x H) (152”x102”x109”) Machine Weight (13,800 LBS) Equipped With · 40 Taper · 8.1K RPM Spindle · 20 Tool Capacity · 4th Axis Pre-wire

Price on request

USA

Used Haas VF-3. Cnc Vertical Machining Centre, w/ 24 Station Side Mount Tool Changer Sold

Year: 2001

Specifications: X Axis Travel: 40" Y Axis Travel: 20" Z Axis Travel: 25" Spindle Horsepower: 20HP Rapid Traverse Rate: 710 IPM Automatic Tool Changer: 24 Position Equipped With: 24 Station Side Mount Tool Changer 2 Speed Gearbox 4th Axis Pre-Wire (Brushless) 1 MB Memory Programmable Coolant Nozzle Custom Macros Coordinate Rotation and Scaling Chip Auger 3.5" Floppy Drive M19 Spindle Orientation 480 Volt Power

Price on request

USA

Used Haas VF-3. Cnc Vertical Machining Centre, w/ 2 Speed Gear Box Sold

Year: 2006

Specifications: Control.................. Haas Table Size............ 48" x 18" Max Table Load.............. 3,500 lbs X-Axis Travel................... 40" Y-Axis Travel................ 20" Z-Axis Travel............... 25" Spindle Nose to Table Top............. 4" – 29" Spindle Motor............ 20 HP Tool Changer.............. 20 Position Equipped With: 2 Speed Gear Box RenishawWireless Intuitive Probing System Chip Auger Programmable Coolant Nozzle Rigid Tap Through Spindle Coolant (300 PSI) 1 MB Memory Quick Code Coordinate Rotation and Scaling Remote Jog Handle

Price on request

USA

Used Haas, Model VF-3. Vertical machining centre Sold

Year: 2004

Specifications: Table Size: 48” X 18” X Axis Travel: 40” Y Axis Travel: 20" Z Axis Travel: 25” Spindle Horsepower: 30 HP Rapid Traverse Rate: 1000 IPM Automatic Toolchanger: 24 Position Equipped With: 24 Station Side Mount Tool Changer 2 Speed Gear Box 10K Spindle Chip Auger 4th Axis Pre-Wire Ethernet Hard Drive 1 MB Memory Quick Code Coordinate Rotation and Scaling Spindle Orientation 3.5” Floppy Drive Remote Jog Handle

Price on request

USA

Haas VF-3BHE Machining center - vertical Sold

Year: 2004

HAAS CNC milling machine, year of production 2004 model VF-3BHE Haas Control (FANUC) Control, 16MB memory table 1219mm x 457mm scope of work X-1016mm Y-508mm Z-635mm holder BT-40, spindle speed 7500rpm, 20ATC magazine capacity, 14.9kw spindle power spindle working time 6145h. chip conveyor, programmable nozzle rigid tapping, 4 axis connection possible The machine is in very good tech condition.

Price on request

Poland

Haas VF-3 Machining center - vertical Sold

Year: 2004

Coolant, Interlocked guards, Low Volt Light, Programmable Coolant Nozzle, Swarf Auger Control HAAS Max & Min distance from table to spindle 102 - 737mm Table Size 1219 x 457mm Traverses XYZ 1016 x 508 x 635mm Rapid Feedrates 18m/minute Spindle Motor Power 20Hp Spindle Speed 7500rpm Spindle Taper BT40 Tool Change Capacity 20 Machine Dimensions 3526 x 2794 x 3035mm Machine Weight 5670kg

Price on request

United Kingdom

HAAS VF-3 Machining center - vertical Sold

Year: 2014

This HAAS VF-3 Vertical Machining Center was built in the year 2014. It is operated through a Haas control unit. This 3 axis machine works with a spindle speed up to 10000 rpm. Spindle speed range: 10000 rpm Number of axis: 3 X-Axis Movement: 1016 mm Y-Axis Movement: 508 mm Z-Axis Movement: 635 mm Outer length: 1219 mm Outer width: 457 mm Table load: 1588 kg Type of tool holder: BT-40 Rigid Threading Auger chip extractor conveyor (AUGER) High Speed …

Price on request

Portugal

HAAS VF-3 Machining center - vertical Sold

Year: 2004

Control HAAS Max & Min distance from table to spindle 102 - 737mm Table Size 1219 x 457mm Traverses XYZ 1016 x 508 x 635mm Rapid Feedrates 18m/minute Spindle Motor Power 20Hp Spindle Speed 7500rpm Spindle Taper BT40 Tool Change Capacity 20 Machine Dimensions 3526 x 2794 x 3035mm Machine Weight 5670kg

Price on request

United Kingdom

Used HAAS Model VF-3 CNC Vertical Machining Center Sold

Year: 1994

SPECIFICATIONS Spindle Nose to Table 4" - 29" Max. Table Weight 3,500lbs. Spindle Speed 7,500rpm Spindle Taper CT-40 Spindle Motor 10 hp Tool Changer 20 Station, Carrousel Type Power 208/230V-60H-3P FEATURES Brand New Spindle Installed New Drawbar, New X-Axis Motor, New Monitor, New Z-Axis Drive Card

Price on request

USA

Used HAAS VF-3. Cnc Vertical Machining Centre, w/ Haas Triple High Speed Cnc Control Sold

Year: 2005

Specification MAXIMUM PALLET LOAD 3,500 LBS SPINDLE NOSE TO PALLET TOP 4" - 29" X AXIS TRAVEL 40" Y AXIS TRAVEL 20" Z AXIS TRAVEL 25" RAPID TRAVERSE RATE X, Y & Z AXES 1000 IPM CUTTING FEED RATE 0.1 - 650 IPM SPINDLE MOTOR 20 HP TOOL CHANGER CAPACITY, SIDE 24+1 STATIONS MAXIMUM TOOL WEIGHT 12 LBS Equipped With: HAAS TRIPLE HIGH-SPEED CNC CONTROL w/15" LCD MONITOR, RS-232C PORT INTERFACE FOR DNC OPERATION, PRE-WIRED FOR SYNCHRONIZED 4TH & 5TH …

Price on request

USA

Used HAAS VF-3. Cnc Vertical Machining Centre, w/ Chip Auger Sold

Year: 2007

Specification TABLE SIZE 48" x 18" MAX. TABLE LOAD (EVENLY DISTRIB.) 3500 LBS SPINDLE NOSE TO TABLE TOP 4" - 29" X AXIS TRAVEL 40" Y AXIS TRAVEL 20" Z AXIS TRAVEL 25" RAPID TRAVERSE RATE ALL AXES 1000 IPM CUTTING FEED RATE ALL AXES 0.1 - 650 IPM SPINDLE MOTOR 20 HP TOOL CHANGER CAPACITY 20 STATIONS MAX. TOOL WEIGHT 12 LBS Equipped With: HAAS 32-BIT CNC CONTROL WITH 14" CRT SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION RIGID …

Price on request

USA

Used Haas VF-3. Cnc Vertical Machining Centre, w/ Programmable Coolant Sold

Year: 1996

Specifications X Axis Travel: 40" Y Axis Travel: 20" Z Axis Travel: 25" Spindle Horsepower: 15 HP Rapid Traverse Rate: 710 IPM Automatic Tool Changer: 20+1 Equipped With: Rigid Tap Haas Quickcode Programmable Coolant Chip Auger 4th Axis Prewire

Price on request

USA

HAAS VF-3 Machining center - vertical Sold

Year: 1997

Year: 1997 Make: HAAS Model: VF-3 Traverses XYZ: 1016 x 508 x 635mm Spindle Speed: 7500rpm Spindle Motor Power: 20Hp (2 speed gearbox) Control: HAAS Tool Change Capacity: 20 Station Taper: BT40 Table Size: 1219 x 457mm B Axis Unit: HRT310 Description: Coolant, 4th Axis Rotary Table, Interlocked guards, Programmable Coolant Nozzle, Gearbox, Manuals, Swarf Auger

Price on request

United Kingdom

Used Haas VF-3 Vertical machining center Sold

Year: 1998

Specification Machine Control Haas 32 Bit CNC Table Size 48" x 18" Machine Travels (X/Y/Z) 40" x 20" x 25" Spindle To Table Distance 4" - 29" Table Capacity 3,500 Lbs. Spindle Taper Cat 40 Spindle Speeds 7,500 RPM Transmission 2-Speed Gearbox Rapid Traverse Rate (X/Y/Z) 710 IPM Tool Changer Style Carousel Tool Changer Capacity 32 Stations Tool Change Time 4.2 Seconds Tool to Tool Max Tool weight 12 Lbs. Spindle Drive 20HP Vector Drive Equipped with: Haas 32 Bit …

Price on request

USA

2001 Haas Vf-3 Sold

Year: 2001

Specifications: Control Haas Table Size 48" x 18" Max Table Load 3,500 lbs X-Axis Travel 40" Y-Axis Travel 20" Z-Axis Travel 25" Spindle Taper CT 40 Spindle Motor 20 HP Spindle Speed 7,500 RPM Tool Changer 20 Machine Weight 12,500 lbs

Price on request

USA

Used Haas, Model VF-3. Cnc Vertical Machining Centre, w/ Hass Cnc Control Sold

Year: 1997

SPECIFICATIONS: TRAVELS: X-AXIS: 40" Y-AXIS: 20" Z-AXIS: 25" SPINDLE MOTOR: 15 HP SPINDLE SPEED: 7,500 RPM 2-SPEED GEARED HEAD TOOLS: 20 ATC EQUIPPED WITH: HAAS CNC CONTROL PROGRAMMABLE COOLANT 4TH AXIS READY FLOPPY DRIVE

Price on request

USA

Used HAAS, Model VF-3. Vertical machining centre Sold

Year: 2007

Specifications TRAVELS: 40" X 20" X 25" Z TABLE: 48" x 18" HP - 20 10,000 MAX RPM 20 POSITION TOOL CHANGER FLOPPY DRIVE RIGID TAP CHIP AUGER

Price on request

USA

HAAS VF-3 Machining center - vertical Sold

Year: 1999

Control HAAS Max & Min distance from table to spindle 102 - 737mm Table Size 1219 x 457mm Traverses XYZ 1016 x 508 x 635mm Rapid Feedrates 18m/minute Spindle Motor Power 20Hp Spindle Speed 7500rpm Spindle Taper BT40 Tool Change Capacity 20 Machine Dimensions 3526 x 2794 x 3035mm Machine Weight 5670kg

Price on request

United Kingdom

HAAS VF-3 Vertical Machining Centre Sold

Year: 2007

CNC Machining Centres serial number: 1060806 control: HAAS travels: X-axis: 1016 mm Y-axis: 508 mm Z-axis: 635 mm table dimensions: 1219 x 457 mm max. table load: 1588 kg max. spindle speed: 7500 rpm. equipment: side magazine 40 items cooling through the spindle programmable coolant nozzle 2-stage gear transmission machine is adapted to work with palletizing (original Haas palletizing included) the cable to the sensor confirming the closure of the pallet is broken and needs to be replaced for the …

Price on request

Poland

Used Haas, Model VF-3. CNC Vertical Machining Center with Midaco Pallet Changer Sold

Year: 2004

Specifications: Table Size: 48"X18" X Axis Travel: 40" Y Axis Travel: 20" Z Axis Travel: 25" Spindle Horsepower: 30HP Rapid Traverse Rate: 1,000 IPM Automatic Tool Changer: 40 Tool Sidemount Equipped With: Midaco Pallet Changer 30 HP Motor Upgrade 40 Station Side Mount Tool Changer 2 Speed Gear Box 10K Spindle Chip Auger 4th Axis Pre-Wire 1 MB Memory Quick Code Coordinate Rotation and Scaling Spindle Orientation 3.5” Floppy Drive Remote Jog Handle

Price on request

USA

HAAS VF-3 Machining center - vertical Sold

Year: 1997

Year: 1997 CNC: Haas Table Size: 1016mm x 457mm Max weight on table: 1600 kgs X axis travel: 1016mm Y axis travel: 508mm Z axis travel: 635mm Speeds: 7500 rpm Tool Taper: BT40 ATC: 32 Motor: 15cv/hp Length: 3050mm Width: 2390mm Height: 2490mm Weight: 5300 kilos

Price on request

Spain

HAAS VF-3 Vertical machining centre Sold

Year: 2000

X AXIS 40 " Y AXIS 20 " Z AXIS 25 " TABLE LENGTH 48 " TABLE WIDTH 18 " MAX WEIGHT ON TABLE (EVENLY DISTRIBUTED) 3500 LB SPINDLE: MAX RATING 20 HP MAX SPEED 7500 RPM MAX TORQUE 75 FT-LB @ 1400 RPM DRIVE SYSTEM DIRECT SPEED BELT DRIVE MAX TORQUE W/OPT GEARBOX 250 FT-LB @ 450 RPM

Price on request

USA

Haas VF-3 cnc universal milling machine Sold

Year: 2001

Haas VF-3 CNC machining center X -1016 mm Y- 660 mm Z- 635 mm

Price on request

Poland

Used HAAS VF-3 Machining center - vertical Sold

Year: 1997

Additional Information: 4th axis available at extra cost - please ask for details Control: HAAS Spindle Motor Power: 15HP Spindle Speed: 7500rpm Spindle Taper: BT40 Table Size: 1219 x 457mm Tool Change Capacity: 20 Station Capacity Traverses XYZ: 1016 x 508 x 635mm Description: Coolant, Interlocked guards, Programmable Coolant Nozzle, Gearbox, Manuals, 4th Axis Interface, Swarf Auger

Price on request

United Kingdom

HAAS VF-3 Machining center - vertical Sold

Year: 1996

Year: 1996 Make: HAAS Model: VF-3 Traverses XYZ: 1016 x 508 x 635mm Spindle Speed: 7500rpm Spindle Motor Power: 20Hp (2 speed gearbox) Control: HAAS Tool Change Capacity: 20 Station Taper: ISO40 Table Size: 1219 x 457mm Description:Coolant, Interlocked guards, Programmable Coolant Nozzle, Gearbox, Manuals, Swarf Auger

Price on request

United Kingdom

Used Haas, Model VF-3. Cnc Vertical machining centre Sold

Year: 1996

Specifications: Travels 40" x 20" x 25" Table Size 48" x 18" Spindle Nose to Table 4" - 29" Max. Table Weight 3,500lbs. Spindle Speed 7,500rpm Spindle Motor 10 hp Tool Changer 20 Station, Carrousel Type Power 208/230V-60H-3P Features: Rigid Tapping Quick Code Gearbox

Price on request

USA

HAAS VF-3 Machining center - vertical Sold

Year: 2001

Control HAAS Max & Min distance from table to spindle 102 - 737mm Table Size 1219 x 457mm Traverses XYZ 1016 x 508 x 635mm Rapid Feedrates 18m/minute Spindle Motor Power 20Hp Spindle Speed 7500rpm Spindle Taper BT40 Tool Change Capacity 20 Machine Dimensions 3526 x 2794 x 3035mm Machine Weight 5670kg

Price on request

United Kingdom

Used Haas VF-3 Vertical Machining Center Sold

Year: 1998

machine control: haas 32 bit cnc control spindle to table distance: 4" - 29" table size: 48" x 18" machine travels (x/y/z): 40" x 20" x 25" table capacity: 3,500 lbs. spindle taper: cat 40 spindle speeds: 7,500 rpm transmission: direct belt drive or 2-speed gearbox rapid traverse rate (x/y/z): 710 ipm tool changer style: carousel tool changer capacity: 20 stations tool change time: 4.2 seconds tool to tool max tool weight: 12 lbs. spindle drive: 20hp vector drive Description: …

Price on request

USA

Used HAAS VF-3. Cnc Vertical Machining Centre Sold

Year: 2000

Specification MAX. TABLE LOAD (EVENLY DISTRIB.) 3500 LBS SPINDLE NOSE TO TABLE TOP 4" - 29" X AXIS TRAVEL 40" Y AXIS TRAVEL 20" Z AXIS TRAVEL 25" RAPID TRAVERSE RATE ALL AXES 710 IPM CUTTING FEED RATE ALL AXES 0.1 - 300 IPM SPINDLE MOTOR 20 HP TOOL CHANGER CAPACITY 20 STATIONS MAX. TOOL WEIGHT 12 LBS Equipped With: HAAS CNC CONTROL WITH 9.00" CRT RIGID TAPPING( SYCHRONIZED TAPPING) RS-232 PORT FOR DNC OPERATION HAAS HRT-310 4TH AXIS ROTARY …

Price on request

USA

Used Haas VF-3. CNC Vertical Machining Center, w/ Haas CNC Control Sold

Year: 1998

Specifications Table Size............................18" X 48" X-Axis Travel........................40" Y-Axis Travel........................20" Z-Axis Travel........................25" Spindle Nose to Table (Minimum)......4" Spindle Nose to Table (Maximum)......29" Tool Capacity........................20 ATC Tool to Tool.........................5 Seconds Chip to Chip.........................6 Seconds Spindle Drive Motor................. 20 HP ****EQUIPPED WITH:**** Haas CNC Control 4th Axis Ready Rigid Tapping Chip Auger RS232 Port Floppy Disc Drive Programmable Coolant Nozzle 2-Speed Geared Head

Price on request

USA

Used Haas VF-3 Vertical machining centre Sold

Year: 1996

+ 4axis Haas control 1220mm x 457mm table scope of work: X 1016mm Y 508mm Z-635mm 20pcs ATC magazine, BT-40, chip conveyor,

Price on request

Poland

Used HAAS VF-3 Vertical machining centre Sold

Year: 1997

SPECIFICATIONS X-AXIS: 40" Y-AXIS: 20" Z-AXIS: 25" SPINDLE MOTOR: 15 HP SPINDLE SPEEDS: 7500 RPM SPINDLE TAPER: CAT 40 NO. OF TOOL POSITIONS: 20 ATC EQUIPPED WITH GEAR BOX PROG. COOLANT CHIP AUGER 4TH AXIS READY, BRUSHLESS (DRIVE BOARD PRESENT) QUICK CODE FLOPPY DRIVE 1 MB OF MEMORY VECTOR DRIVE RIGID TAPPING HOURS AS OF DECEMBER 2010. BOARD WORK PERFORMED AND HOURS RESET. SERVO ON TIME: 6365 IN MOTION TIME: 10,208

Price on request

USA

HAAS VF-3 Machining center - horizontal Sold

Year: 1998

MACHINE SPECS: CONTROL: HAAS TABLE SIZE: 48" X 18" TRAVELS: 40" X 20" X 25" TAPER: 40 SPINDLE SPEED: 7500 RPM MAIN MOTOR: 20HP ATC POSITION: 20 ATC EQUIPPED WITH INDEXER OR ROTARY TABLE: YES EQUIPPED WITH 5-AXIS CAPABILITY: NO EQUIPPED WITH: Haas CNC Control Programmable Coolant Nozzle HRT210HS Rotary Table Chip Auger

Price on request

USA

Used Haas VF-3. Vertical Machining Centre, w/ 2-Speed Gear Box Sold

Year: 2006

Specifications Travels: X-Axis 40" Table: Size 48" x 18" Max Load 3,500 LBS Y-Axis 20" Z-Axis 25" Motor 20 HP / Vector Drive Nose to Table Top 4" - 29" Tool Changer Positions 20 + 1 Tool Changer Type Carousel Equipped With: Haas 32-Bit CNC Control w/ CRT 2-Speed Gear Box Thru-Spindle Coolant (300 PSI) Programmable Coolant Renishaw Wireless Intuitive Probing System Chip Auger 1 MB Memory Quick Code Coordinate Rotation & Scaling Remote Jog Handle

Price on request

USA

Haas VF-3 Machining center - vertical Sold

Year: 2013

X axis 1016 mm Y axis 508 mm Z axis 635 mm Max. spindle speed 8,000 rpm Rapid feed X, Y, Z 25.4 m / min Power 22.4 kW Haas Control CNC Table dimensions 1219 x 457 mm Max. workpiece weight 1 588 kg Tool magazine 20 pcs. Cone SK40 Cooling through the spindle Chip ejector

Price on request

Poland

Haas VF-3 Sold

Year: 1999

machine control: haas 32 bit cnc spindle to table distance: 4" - 29" table size: 48" x 18" machine travels (x/y/z): 40" x 20" x 25" table capacity: 3,500 lbs. spindle taper: cat 40 spindle speeds: 7,500 rpm transmission: 2-speed gearbox rapid traverse rate (x/y/z): 710 ipm tool changer style: carousel type tool changer capacity: 20 stations tool change time: 4.2 seconds tool to tool max tool weight: 12 lbs. spindle drive: 20hp vector drive

Price on request

USA

Used Haas VF-3 Vertical machining centre, 1995 Sold

Year: 1995

Specification / Description SPECIFICATIONS Table Working Surface 18" x 48" X Axis Travel 40" Y Axis Travel 20" Z Axis Travel 25" Min/Max Distance, Spindle Nose to Table 4" / 29" Spindle Taper CAT 40 Spindle Speeds 0 to 7500 RPM ATC Type Carousel 20 Pos Spindle HP 15 Equipped With: EQUIPPED WITH HAAS CNC Control 12" CRT Screen 15 HP Haas Vector Drive 2 Speed Geared Head 7,500 RPM Spindle Rigid Tapping Manuals

Price on request

USA

Haas Vf-3 Cnc Vertical Machining Center, Clean, Low Price Sold

Year: 1993

HAAS CNC VERTICAL MACHINING CENTER MODEL: VF-3 Year: 1993 GENERAL SPECIFICATIONS Table Working Surface: 18" x 48" Table Travel, X-Axis: 40" Table Travel, Y-Axis: 20" Vertical Column Travel, Z-Axis: 25" Minimum/Maximum Distance, Spindle Nose To Table: 4"/29" Spindle Taper: Cat 40 Spindle Speeds: 0 to 7500 RPM EQUIPPED WITH HAAS CNC Control 15 HP Spindle Drive Motor Twenty Position Automatic Tool Changer (Recently replaced carousel) Coolant System With Complete Enclosure Approximate Weight: 11,000 Lbs.

Price on request

USA

Haas VF-3 Machining center - vertical Sold

Year: 2015

Table Size 48” x 18” Table Load (max) 3,500 lbs X-Axis Travels 40” Y-Axis Travels 20” Z-Axis Travels 25” Spindle Nose to Table Top (mix–max) 4.2” – 29.2” Spindle Speed 8,100 RPM Spindle Taper CAT40 Spindle Motor 40 H.P. / AC Drives Tool Changer Type / Positions Umbrella / 20 + 1 Positions Machine Dims / Weight 122” L x 90” W x 118” H / 16,000 Lbs EQUIPPED WITH: Haas CNC Control 8,100 RPM Spindle 40 H.P. Vector Drive …

Price on request

USA

Haas Vf-3 Cnc Vertical Machining Center Sold

Year: 1996

X-Travel: 40" Y-Travel: 20" Z-Travel: 25" Table Size: 48" x 18" Max. Table Load: 3500 lbs Spindle Nose to Table Top: 4" - 29" Rapid Traverse Rate All Axes: 710 IPM Cutting Feed Rate All Axes: 0.1 IPM - 500 IPM Spindle Speed: 7500 RPM Spindle Taper: CAT 40 Spindle Motor: 15 hp Tool Changer: 21-ATC Max. Tool Weight: 12 lbs EQUIPPED WITH: HAAS CNC CONTROL RENISHAW OMP 60 PROBE COMPLETE HAIMER PROBE 8" HAAS 4TH AXIS INDEXER WITH TAILSTOCK …

Price on request

USA

Haas Vf-3 Vertical Machining Center Sold

Year: 1998

X-Travel: 40" Y-Travel: 20" Z-Travel: 25" Table: 48" x 18" Power: 20 hp Spindle Taper: CAT 40 Max Table Load: 3,500 lbs EQUIPPED WITH: HAAS CNC Control

Price on request

USA

Haas Vf-3 Vertical Machining Center Sold

Year: 1998

X-Travel: 40" Y-Travel: 20" Z-Travel: 25" Table: 48" x 18" Spindle Taper: CAT 40 Max Table Load: 3,500 lbs EQUIPPED WITH: HAAS CNC Control

Price on request

USA

HAAS VF-3 Machining center - vertical Sold

Year: 2014

This 4-axis HAAS VF-3 vertical machining centre was manufactured in 2014. It features a robust 1016 mm X-axis travel, 508 mm Y-axis, and 635 mm Z-axis, ensuring versatile machining capabilities. The spindle delivers a maximum power of 22.4 kW and speeds up to 8100 rpm. Equipped with a 24-slot tool changer and additional 4th axis for complex operations. A great opportunity to buy this HAAS VF-3 vertical machining centre. Contact us for further details regarding this vertical machining center. Number …

Price on request

Spain

Axis X	1016 mm
Axis Y	508 mm
Axis Z	635 mm
Rotary table (4th axis)	no
Type of CNC	Haas
Table length	1219.2 mm
Table width	457.2 mm
Max. part weight	1588 kg
Number of tool pockets	20
Spindle taper	40
Max. spindle speed	7500 rpm
Spindle motor power	14.9 kW
-------------------
Length x width x height	2997.2 × 2794.0 × 3048.0
Weight	5671.5 kg

Haas VF-3

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?