Machine's specifications - Haco TS 3006 Used machines

Manufacturer	Haco
Model	TS 3006
Category	Shears - hydraulic guillotines

HACO TS 3006 hydraulic shear Sold

Year: 2000

Cutting angle adjustment: 0.6 to 3 Total power requirement: 7.5 kW Machine weight: approx. 4,800 kg. Area L-W-H: 3800 x 1800 x 1750 mm HACO control model NC SP 9 * simple operation directly at the cutting table * Cutting angle adjustment + backgauge - Motorized adjustable and programmable backgauge - electr. / Hydraulic cutting angle adjustment - Manual cutting angle adjustment from the front - front finger protection with size defects: stood about 2 years loose contact

Price on request

Luxembourg

Haco TS 3006 hydraulic shear Sold

Year: 2001

Capacity: 3100 x 6mm Electric cutting angle adjustment Electric back gauge Electrical sheet thickness setting

Price on request

Netherlands

Used HACO TS 3006 Shear - hydraulic guillotine Sold

Year: 2006

Cutting length: 3.050 mm Cutting capacity: 6 mm Control: SP8 Back stop: 1.000 mm Sheet clamps: 18 st. Blade clearance: Yes Cutting rake: 0,5 - 3° Machine weight: 4.500 kg Additional information: Featured with: - Foot control - Cutting adjustment - Support arm 1.000 mm - Hand safety guard front side - Safety fences - Manual blade gap - Light beam back side

Price on request

Netherlands

Used Hydraulic Guillotine HACO TS306 Sold

Year: 1988

C/w power backgauge, blade gap adjustment & squaring arm

Price on request

United Kingdom

HACO TS 3006 Hydraulic shearing machine Sold

Year:

Maximum thickness 6 mm Maximum length 3050 mm Backgauge adjustment 730 mm Cutting angle 0,5 à 3 Blade gap adjustment 0,05 à 0,3 mm

Price on request

France

HACO TS 306 Hydraulic shearing machine Sold

Year: 1986

14-24 strokes/min

Price on request

France

HACO TS306 Hydrolic shear Sold

Year: 1986

Hydraulic shears hand HACO TS306. This cutter is equipped with: . clearance between blades of 0.05 to 0.3 mm . JPN rule and square Specifications: Horsepower: 10 hp Rate (strokes / min): 14 to 24

Price on request

France

HACO TS 3006 Sold

Year:

Price on request

France

Used HACO TS 306 Hydraulic shearing machine Sold

Year: 1989

Price on request

Germany

Used HACO TS 306 Hydraulic shearing machine Sold

Year: 2006

Price on request

France

Used HACO TS 3006 Hydraulic shearing machine Sold

Year:

Epaisseur maximale 6 mm Longueur maximale 3050 mm Capacité de la butée arrière 750 mm Angle de coupe 1à 3 Réglage du jeu entre-lames 0,05 à 0,3 mm Cadence 14 à 24 coups/mn Commande hydraulique Moteur 10 cv Poids approximatif 4500 kg Encombrement 3700x1700x1700 mm

Price on request

France

HACO TS306 3000MM X 6MM HYDRAULIC GUILLOTINE Sold

Year: 1985

Capacity 3000MM X 6MM Back gauge POWER Rapid blade adjustment YES Input 415/3/50 AC 7.5 HP APPROX Clamps 18 X HYDRAULIC Actuated via WANDER TYPE FOOT SWITCH Fitted with FINGER GUARD Length 12'2" (3.71M) Width 5'4" (1.63M) Height 5'8" (1.73M) Nett weight approx. 3 TON 10 CWTS (3556 KGS)

Price on request

United Kingdom

Used HACO TS306 Mechanical shear guillotine Sold

Year:

Price on request

France

HACO TS 306 Hydraulic shearing machine Sold

Year:

3000 mm x 6 mm

Price on request

France

HACO TS 306 hydraulic guillotine Sold

Year: 1980

Specifications: Max. length of plate 3000 mm Max. plate thickness 6 mm Equipped with Motorized back gauge Angle plate Extended sheet support arms Foot contact Service tools etc.

Price on request

Denmark

Haco TS 306 Guillotine Shear Sold

Year: 1986

Specifications: Max. shearing length 3100 mm Max. sheet thickness 6 mm Motorized back gauge. 750 mm Hydraulic.

Price on request

Denmark

Haco TS 3006 Shear / guillotine CNC Sold

Year: 2005

Year of production: 2005 Cutting thickness: 6 mm Cutting length: 3 000 mm Control: SP 8 Made in: Belgium

Price on request

Poland

HACO TS306 hydraulic shear Sold

Year:

maximum thickness: 6mm maximale lengte: 3m voltage: 400VAC The blades on the machine are new automatic backstop automatic hoekverandering manual knife play

Price on request

Belgium

HACO TS 3006 hydraulic shear Sold

Year: 1992

sheet length 3050 mm plate thickness 6,0 mm cutting angle adjustment 0,5 bis 3 ° down holder 18 Stück no. of strokes 11 - 22 Hub/min back stop - adjustable 10-750 mm total power requirement 7,5 kW weight of the machine ca. 4,5 To. range L-W-H 3,8 x 1,8 x 1,7 mm

Price on request

Spain

Haco TS306 CNC shears Sold

Year: 1984

Price on request

France

Haco TS 3006 hydraulic shear Sold

Year: 1992

Neat used plate cutter from Haco Type TS 3006 Capacity 3050 x 6mm Adjustable back gauge

Price on request

Netherlands

Haco TS306 hydraulic shear Sold

Year: 1989

Hydraulic guillotine / guillotine shears for cutting metal HACO brand max sheet 6mm max bending length 3050mm electric adjustment of the knife angle adjustment of the gap between the knives electrically adjustable rear bumper with reading front supports machine connected to electricity with the possibility of checking at work in our warehouse

Price on request

Poland

HACO TS3006 hydraulic shear Sold

Year: 1996

brand: HACO type: TS 3006 capacity: 3000 x 6 year: 1996

Price on request

France

Haco TS3006 hydraulic shear Sold

Year:

Manufacturer: Haco Model: TS3006 Length: 3000mm Width: 6mm

Price on request

United Kingdom

Haco TS 3006 hydraulic shear Sold

Year: 2012

Very nice used 3 meter plate cutter from Haco Type: TS 3006 Capacity: 3100 x 6 mm Electric NC back gauge

Price on request

Netherlands

Haco TS3006 hydraulic shear Sold

Year:

Maximum thickness 6 mm Maximum length 3050 mm Rear stop capacity 750 mm Knife clearance adjustment 0.05 to 0.3 mm Approximate weight 4500 kg Overall dimensions 3700x1700x1700 mm

Price on request

Czech Republic

Haco TS 3006 mechanical shear Sold

Year: 2000

Capacity: 3050 x 6 mm Motorised backgauge Motorised knife angle adjustment Manual blade gap adjustment

Price on request

Denmark

Haco TS 3006 hydraulic shear Sold

Year: 2000

Used Haco motorised shear Capacity 3050 x 6 mm Year: 2000 Motorised backgauge Motorised knife and angle adjustment Manual blade gap adjustment

Price on request

Denmark

Haco TS 3006 hydraulic shear Sold

Year: 2007

SP8 control Cutting table with sheet metal support. Hit counter with reset. Motorized rear stop. 2 lower cylinders for lowering the blade. 2 cutting blades with 4 cutting faces. Mechanized safety system for lowering blades.

Price on request

Spain

Haco TS 3006 CNC shears Sold

Year:

Digitally controlled back gauge Maximum thickness 6 mm Maximum length 3050 mm Rear gauge capacity 750 mm Cutting angle 1 to 3 Adjusting the clearance between blades 0.05 to 0.3 mm Cadence 14 to 24 strokes / min Hydraulic control 10 hp engine Approximate weight 4500 kg Dimensions 3700x1700x1700 mm Accessories: Squaring ruler

Price on request

France

Haco TS306 CNC shears Sold

Year:

Hydraulic guillotine for cutting sheet metal from HACO Belgium type TS306, 3100 mm x 6.3 mm (ST45) The machine has a rapidly variable knife gap with a sheet thickness reading, and a hydraulically variable knife angle of 0.5-3 degrees. 7.5 kW engine. Weight 4.8 t. Electric bumpers with reading, 850 mm bumper departure. 1 support for supporting metal sheets at the front of the machine, with a 90 degree cut gauge Original DTR documentation and health and safety instructions in …

Price on request

Poland

Haco TS 3006 hydraulic shear Sold

Year: 2002

HACO TS 3006 hydraulic shears • capacity: 3000x6 mm • year: 2002

Price on request

Croatia

Used HACO TS 3006 Hydraulic shearing machine Sold

Year: 2005

Excellent condition.

Price on request

Russia

Used HACO TS 3006 Cnc shearing machine Sold

Year: 1993

CAPACITY: 3000 X 6 MM MOTORISED BACK GAUGE RAPID BLADE ADJUSTMENT 1 SQUARING ARM 1000 MM RAPID BLADE ADJUSTMENT WITH VARIABLE RAKE 18 CLAMPS WITHOUT THROAT

Price on request

Spain

HACO TS3006 hydraulic shear Sold

Year: 1965

Maximum thickness 6 mm Maximum length 3050 mm Backgauge capacity 750 mm Cutting angle 1-3 Adjusting the inter-blade clearance 0.05-0.3 mm Cadence 14-24 strokes / min Hydraulic control OK Engine (CV) 10 HP Approximate weight (Kg) 4500 kgs Overall dimensions 3700 x 1700 x 1700 mm

Price on request

France

HACO TS306 CNC shears Sold

Year:

Hydraulic guillotine for cutting sheet metal by HACO Belgium type TS306, 3100 mm x 6.3 mm (ST45) The machine has a quickly variable gap between cutters with sheet thickness reading, and a hydraulically variable knife angle 0.5 -2 deg. 7.5 kW engine. Weight: 5 tons Electric bumpers with reading, 850 mm bumper departure. 1 support for supporting sheet metal at the front of the machine, with an attachment for cutting at 90 degrees Original DTR documentation and OHS instructions in …

Price on request

Poland

Haco TS 3006 hydraulic shear Sold

Year: 2007

Hydraulic shear Haco TS 3006 with positioner mod SP8 3 meters x 6 millimeters 2007 Vertical cut. Cutting length: 3,050 mm. Espersor maximum cut: 6 mm. Cutting thickness stainless .: 4mm. Variable cutting angle. Adjustable angle 0,5-3º Angle selection cutting position reader. SP8 preselection control with positioning the backstop. Retraction of the back gauge from control. Selection of cutting length from the control. Number of strokes per minute: 8-14 18 Pisadores. 2007. UL In perfect state.

Price on request

Spain

Used HACO TS 306 Hydraulic shearing machine Sold

Year:

Price on request

France

HACO TS3006 hydraulic shear Sold

Year: 1995

Capacity 3000mm x 6mm Back gauge Power Rapid blade adjustment Yes Variable rake Yes Work supports 3 @ 930mm Squaring arms 1 @ 1000mm Input 415/3/50 ac 7.5 kW approx Clamps 14 x Hydraulic Read-out to back gauge Metric Actuated via Wander Type Foot Switch Fitted with Fingerguard Length 12'8" / 3.86m Width 5'6" / 1.68m Height 5'2" / 1.58m Nett weight actual. 4.5 ton / 4570 kgs

Price on request

United Kingdom

HACO TS3006 HYDRAULIC GUILLOTINE Sold

Year: 1990

Capacity 3000MM X 6MM Back gauge POWER Rapid blade adjustment YES Variable rake YES Work supports 2 @ 1M Squaring arms 1 @ 1M Input 415/3/50 AC 7.5 KW APPROX Clamps 18 X HYDRAULICS Read-out to back gauge METRIC Actuated via WANDER TYPE FOOT SWITCH Fitted with FINGERGUARDS Length 12'4" (3.76M) Width 5'8" (1.73M) Height 5'8" (1.73M) Nett weight actual 4 TON (4064 KGS)

Price on request

United Kingdom

Haco TS 3006 hydraulic shear Sold

Year: 2004

sheet width: 3050 mm plate thickness: 6,0 mm thickness at "Niro-steel": 4,0 mm cutting angle adjustment: 0,5 bis 3,0 ° down holder: 13 Stück no. of strokes: 10 - 15 Hub/min work height max.: 770 mm back stop - adjustable: 1.000 mm total power requirement: 7,5 kW weight: 4500 kg range L-W-H: 3840 x 1900 x 1700 mm Furnishing - HACO control model NC SP 8 * simple operation at the cutting table, left in front * Target/actual value input …

Price on request

Germany

Haco TS306 CNC shears Sold

Year: 1990

Hydraulic guillotine - HACO Belgium type TS306 rb: 1990 Cutting length: 3100 mm x 6 mm. Variable knife angle set from the desktop. Electric bumper with reading, manual precision. Machine weight 5 tons. 7.5 kW engines. Angle on the front. Full original DTR, workplace health and safety instruction in Polish. Cutting knives 90% sharpness.

Price on request

Poland

HACO TS 306 Hydraulic shearing machine Sold

Year:

Cutting lenght : 3000 mm Cutting capacity : 6 mm Back gauge type : electric Machine dimension : 3300X1800X2000 mm Weight : 5 Tonnes

Price on request

France

Haco TS 3006 Shear / guillotine CNC Sold

Year: 2005

hydraulic Shear controller SP 8 replacement blade

Price on request

Germany

Used HACO TS3006 Hydraulic shearing machine Sold

Year:

Price on request

France

Used HACO TS 3006 Hydraulic shearing machine Sold

Year: 2005

Price on request

Russia

HACO TS 306 Hydraulic shearing machine Sold

Year:

Maximum thickness 6 mm Maximum length 3050 mm Capacity backstop 750 mm Cutting angle 1-3 ° Adjusting the clearance between blade from 0.05 to 0.3 mm Rate from 14 to 24 strokes / min Hydraulic control yes 10 hp engine Approximate weight 4500 kg Dimensions 3700x1700x1700 mm accessories - Thrust Power rear control

Price on request

France

Haco TS 306 Guillotine Shear Sold

Year: 1986

Specifications: Max. shearing length 3100 mm Max. sheet thickness 6 mm Motorized back gauge. 750 mm Cutting angle adjustment. Cutting crack adjustment. Length 3750 mm, Height 1700 mm, Width 2200 mm, Weight 5000 kg

Price on request

Denmark

HACO TS 3006 Hydraulic shearing machine Sold

Year:

Length 3050 mm. Thickness 12 mm. Engine 22.5 kW. Dimensions Length 4,240 mm. Width 1,900 mm. 2,100 mm high. Weight 8.500 kg. Suitable to RD 1215

Price on request

Spain

Haco TS 306 hydraulic shear Sold

Year:

- Cutting lenght : 3 050 mm - Cutting thickness : 6 mm - Number of hold downs : 18 - Back gauge : CN - Cutting angle adjustment : 0.5-3 - Number of strokes/min : 8-14 - Lengths of the squaring gauge : 1000 mm - Working height : 770 mm - Backgauge stroke : 750 mm - Electrical feed : 380 V, 50 Hz - Motor power: 7.5 KW - Control foot pedal

Price on request

France

Haco TS3006 shears Sold

Year: 1990

Sheet thickness (mm) 6 Sheet width (mm) 3050

Price on request

Netherlands

Haco TS306 hydraulic shear Sold

Year: 1987

Price on request

France

Haco TS306 CNC shears Sold

Year: 1984

Haco TS306 CNC shears

Price on request

France

Haco TS306 hydraulic shear Sold

Year: 1987

HACO Shearing TS 306 1987

Price on request

France

HACO TS 3006 CNC shears Sold

Year: 2015

The scissors are in very good condition, minimally used. Control unit SP 9. max. sheet thickness - black steel: 6 mm max. sheet length: 3050 mm cutting angle adjustment: 0.5 - 3° number of sheet holders: 18 number of cuts: 8 - 14 /min working height: 770 mm motor power: 7, 5 kW

Price on request

Czech Republic

Haco TS306 hydraulic shear Sold

Year: 1985

In good condition, upgraded machine control. Equipped with an electric rear bumper with reading and NC control. It is adjustable gap and cutting angle. The maximum sheet thickness of 6 mm. The maximum length of 3100 mm. blades included in the price. Loading included in the price.

Price on request

Poland

HACO TS 3006 hydraulic shear Sold

Year: 1997

Maximum thickness 6 mm Maximum length 3050 mm Rear stop capacity 750 mm Cutting angle 1 to 3 Adjusting the clearance between blades 0.05 to 0.3 mm Cadence 14 to 24 strokes / min Hydraulic control yes 10 hp engine Approximate weight 4500 kg Overall dimensions 3700x1700x1700 mm

Price on request

France

Haco TS 306 hydraulic shear Sold

Year: 1987

Capacity: 3050 x 6 mm Electrical backgauge

Price on request

Netherlands

Used HACO, Model TS3006. Hydraulic Shearing machine Sold

Year: 1988

FOPBG.18 HOLDOWNS.R/GAP ADJ.10HP.575V (1/4" X 10')

Price on request

Canada

Haco TS 3006 hydraulic shear Sold

Year: 1992

Approximate specifications Maximum thickness 6 mm Maximum length 3050 mm Rear gauge capacity 750 mm Cutting angle 1 to 3 Adjusting the clearance between blades 0.05 to 0.3 mm Cadence 14 to 24 strokes / min Hydraulic control 10 hp / 380 V motor Approximate weight 4500 kg Dimensions 3700x1700x1700 mm Accessories - Manual back gauge - with supports and ruler

Price on request

France

Haco TS306 mechanical shear Sold

Year:

3000X6 mm Electric stop up to 750

Price on request

France

Used Haco TS3006 hydraulic shear Sold

Year:

Plate Thickness (mm): 6mm Back Gauge: Powered Blade Gap Adjustment: Yes Rake Adj (Deg): Yes Squaring Arm: Yes Variable Cut: No Sheet Supports: Yes 1 Plate Width - Max. (mm): 3000mm Main Drive Power (KW/V/Hz): 415v

Price on request

United Kingdom

HACO TS 3006 shears Sold

Year: 2006

Condition: good Capacity: 3000 x 6 mm Backstop: 1000 mm motorized Control: SP 8 C.E. norms

Price on request

Denmark

Used HACO TS306 Hydraulic shearing machine Sold

Year:

Price on request

France

HAco TS306 CNC shears Sold

Year: 1986

Hydraulic guillotine for cutting sheet metal from HACO Belgium type TS306, 3100 mm x 6 mm (ST45), rb. 1986. Version for 3-shift work. The machine has a rapidly changing knife gap with the reading of the sheet thickness, controlled by CNC, and a hydraulically variable knife angle in the range of 1-3 degrees. 7.5 kW engine. Weight 5.8 t. Electric bumpers with reading, 850 mm bumper departure. Supports for supporting sheet metal at the front of the machine, with a …

Price on request

Poland

Hydraulic shear HACO TS 3006 Sold

Year: 2001

Manufactured by Haco(Belgium) Year of manufacture 2001 Control: SP 8 Max. plate thickness, mm 6 Max. plate width, mm 3050 Number of plate holders: 18 Cutting angle, degrees 0,5...3,0 Backgauge motor power, kW 0,44 Backgauge stroke, mm 750 Main drive power, kW 7,5 Voltage, V 380 Frequency, Hz 50 Machine dimensions, mm 3880 x 1650 x 1700 Machine weight, kg 4500 The shear is in nice condition. Machine is fully complete and without oil leaks. It is equipped with additional …

Price on request

Lithuania

Haco TS306 hydraulic shear Sold

Year:

Guillotine for metal HACO Model TS 306. Ability to check the work. Easily cut into 1 mm and 6 mm thick throughout. Equipped with an electric rear bumper with reading, electrically adjustable gap between the knives electrically adjustable angle cutter. It includes an additional set of knives and the front supports as photo. Guillotine well maintained ready to work

Price on request

Poland

Used Haco TS3006 hydraulic shear Sold

Year:

Plate Thickness (mm): 6mm Back Gauge: Powered Blade Gap Adjustment: Yes Rake Adj (Deg): Yes Squaring Arm: Yes Variable Cut: No Sheet Supports: Yes 1 Plate Width - Max. (mm): 3000mm Main Drive Power (KW/V/Hz): 415v

Price on request

United Kingdom

HACO TS3006 hydraulic shear Sold

Year:

HACO HYDRAULIC SHEAR MOD/TS 3006, CAPACITY 3100MM X 6MM THICKNESS. BLADE SEPARATION, HYDRAULIC ANGLE VARIATION, MOTORIZED REAR STOP

Price on request

Spain

Haco TS 3006 hydraulic guillotine shear Sold

Year: 2011

Capacity: 3100 x 6 mm SP9 NC control Foot pedal + Angle Guide

Price on request

Netherlands

Haco TS 3006 hydraulic guillotine shear Sold

Year: 1991

Capacity: 3050 x 6 mm vertical guide foot Pedal

Price on request

Netherlands

HACO TS 3006 hydraulic shear Sold

Year: 2003

Cutting angle adjustment: 0.5 to 3 ° Total power requirement: 7.5 kW Weight of the machine: approx. 4,800 kg. Range L-W-H: 3800 x 1800 x 1750 mm HACO control model NC SP 9 * easy operation directly on the cutting table * Cutting angle adjustment + back gauge - Motorized adjustable and programmable back gauge - electr. / hydraulic cutting angle adjustment - manual cutting angle adjustment from the front - front finger guard with recessed handle - foot switch

Price on request

Denmark

Haco TS306 hydraulic shear Sold

Year:

Hydraulic guillotine for cutting sheet metal by HACO Belgium type TS306, 3100 mm x 6.3 mm (ST45) The machine has a quickly variable gap between cutters with sheet thickness reading, and a hydraulically variable knife angle 0.5 -3 degrees. 7.5 kW engine. Weight 5.5 tons Bumpers with reading, bumper departure 850 mm. 1 support for supporting sheets of metal at the front of the machine, with a measure for cutting 90 degrees Original DTR documentation and OHS instructions in Polish. …

Price on request

Poland

Haco TS 3006 hydraulic shear Sold

Year:

Hydraulic shear haco. mod / ts 3006. capacity 3100 x 6mm. motorized rear stop, blade separation regulation, angle of cut variation. extra blade set.

Price on request

Spain

Haco TS 3006 hydraulic shear Sold

Year: 1991

Haco brand hydraulic shear model TS 3006. Cutting length 3000 mm. Thickness 6 mm.

Price on request

Spain

Haco TS 306 hydraulic shear Sold

Year:

Maximum thickness 6 mm Maximum length 3050 mm Rear gauge capacity 750 mm Cutting angle 1 to 3 ° Adjustment of the clearance between blades 0.05 to 0.3 mm Cadence 14 to 24 strokes / min Hydraulic control yes 10 hp engine Approximate weight 4500 kg Dimensions 3700x1700x1700 mm Electrically operated back gauge

Price on request

France

Haco TS 306 hydraulic shear Sold

Year: 1983

Type: TS 306 Capacity: 3100 x 6 mm Electric backgauge

Price on request

Netherlands

Cisaille-guillotine HACO TS 3006 d occasion Sold

Year: 1994

Épaisseur max 6mm, longeur 3000

Price on request

Poland

HACO TS3006 mechanical shear Sold

Year:

HACO TS3006 mechanical shear Features Brand Haco Model TS3006 Approximate year 2003 Condition Good condition

Price on request

France

Haco TS3006 hydraulic shear Sold

Year:

Guillotine shears HACO Model: TS3006 Capacity: 3050 x 6 mm Electric back gauge, stroke: 750 mm Adjusting the clearance between blades at the front of the machine 3 adjustable cutting angles: 0.5 to 3 ° Motor power: 7.5 kw - Three-phase 400 volts Dimensions: 3800 x 1650 x 1750 mm Weight: 4500 kg

Price on request

France

Haco TS 3006

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?

Cutting length	3050 mm
Max. thickness	6 mm
Max cutting angle	3 °
Min cutting angle	1 °
Back gauge type
Backgauge adjustment	750 mm
Sheet support
-------------------
Length x width x height	3700.0 × 1700.0 × 1700.0
Weight	4500 kg