Axis X | 660 mm |
Axis Y | 356 mm |
Axis Z | 457 mm |
Rotary table (4th axis) | no |
Type of CNC | HURCO MAX CONTROL |
Table length | 762 mm |
Table width | 356 mm |
Max. part weight | 340.3 kg |
Number of tool pockets | 16 |
Spindle taper | CAT 40 |
Max. spindle speed | 8000 rpm |
Spindle motor power | 11 kW |
------------------- | |
Length x width x height | 2311.4 × 1981.2 × 2438.4 |
Weight | 3176 kg |
Year: 2006
Control MAX (SINGLE SCREEN) Table size 760MM X 355MM Table load 350 KGS Longitudinal traverse X AXIS 650MM Cross traverse Y AXIS 350MM Vertical traverse Z AXIS 450MM Speeds 0-8000 RPM Feed rate RAPID UP TO 24 METRES PER MINUTE Spindle taper ISO 40 Automatic tool changer YES Number of tools 16 Input 415/3/50 AC 11 KW Length 6'6" (1.98M) Width 7'4" (2.24M) Height 8'4" (2.54M) Nett weight approx. 3 TON 15 CWTS (3810 KGS)Price on request
United Kingdom
Year: 2008
Centre d'usinage vertical HURCOPrice on request
France
Year: 2007
negotiable pricePrice on request
Poland
Year: 2005
Specifications: X-Axis Travel............................26" Y-Axis Travel............................16" Z-Axis Travel.............................20" Spindle Motor........................... 15 HP Rapid Traverse X,Y,Z................750 IPM ATC..........................................16 Equipped With: Hurco Max Control Rigid Tapping Flood Coolant Advance Velocity Control Ultinet (Ethernet Communications) Max Classic Upgrade Mini KeyboardPrice on request
USA
Year: 2004
MODEL CNC VM1 ULTIMAX SERIAL NUMBER H- V10885 YEAR 2004 CE approved YOU STATE of GOOD MACHINE the SURFACE of 730 X 350 mm X 650 mm Y axis 350 mm 450 mm z-axis 1 PALLETS TOOL MAGAZINE 16 LOCATIONS RAPID 20 MT/MIN SPINDLE MOUNT ISO 40 SPINDLE SPEED 10000 MIN 13 SPINDLE MOTOR POWER KW LENGTH 2800 mm WIDTH 2170 mm 2770 mm HEIGHT WEIGHT EVACQUATORE 8000 KG YOU CHIPS Manual INSTRUCTIONS YOUPrice on request
Italy
Year: 2003
SPECIFICATIONS: Table Size: 30" x 14" Maximum Weight on Table: 750 Lbs. X-Axis Travel: 26" Y-Axis Travel: 14" Z-Axis Travel: 18" Rapid Traverse to All Axes: 750 IPM Spindle Drive Motor: 15 HP (Peak Duty) Spindle torque: 54 Ft. Lbs. at 1,450 RPM Automatic Tool Changer: 16-Position (Left Side Mount/Swing Arm Type) NO Tool Holders Coolant Pump and Piping Presently Wired for 3 Phase, 60 Hz, 220 Volt Operation Hurco UTIMAX CNC Control: Upgrade: Executive: V2.37.03e Integration: V2.06.021 NO Keyboard …Price on request
USA
Year: 2007
Specification Description X-Axis Travel 26" Y-Axis Travel 14" Z-Axis Travel 18" Table Size 30" x 14" Maximum Weight on Table 750 LBS Spindle Speeds 8000 RPM Spindle Motor 15 HP Maximum Spindle Torque 54 ft lbs @ 1450 RPM Rapid Traverse Rate - X/Y/Z-Axes 945/945/750 IPM Automatic Tool Changer Capacity 20 ATC Spindle Taper CAT 40 Electrics 240V/3/60 Approximate Machine Weight 6200 LBS Equipped With: WinMax CNC Conversational Control w/12" LCD Screen Conversational & NC (M & G Code) Programming …Price on request
USA
Year: 2006
Year: 2006 Make: Hurco Model: VM1 Control: Hurco Max Spindle Motor Power: 11kW Spindle Speed: 80oorpm Spindle Taper: ISO40 Table Size: 762 x 356mm Tool Change Capacity: 16 Station Tool Size: DlN40 Traverses XYZ: 660 x 356 x 457mm Description: Coolant, lnterlocked guards, Low Volt LightPrice on request
Poland
Year: 2004
vertical machining center Hurco VM1 2004 Travels XYZ - 560x356x457 Spindle speed - 8000 rpm Tool magazine - 16 positions Table size 762x356 Torque - 74 Nm Spindle taper - SK40Price on request
Russia
Year: 2006
Hurco VM1 vertical machining center Specification Description Table Size 30 "x 14" Maximum Weight on Table 750 LBS X-Axis Travel 650 Y-Axis Travel 350 Z-Axis Travel 450 Rapid Traverse Rates (X & Y / Z) 750/500 IPM Spindle Taper CAT 40 8000 RPM Spindle Speeds Control Spindle Drive Motor 15/10 HP Spindle Torque 54 ft. pounds. @ 1450 RPM Automatic Tool Changer Capacity 16 (Sidemount / Swing Arm) Maximum Tool Diameter 3.5 "/ 5" Maximum Tool Length 9.8 " Maximum …Price on request
Italy
Year: 2005
Hurco WinMax CNC Control Rigid Tapping Ultipockets Ultinet Advanced Veloctiy Control Ramp/Helical Entry Graphics Extended HDD Extended Memory Floppy Drive Ethernet Port Dual Arm Tool Changer Coolant SystemPrice on request
USA
Year: 2003
Travels: 660mm x 356mm x 457mm Control: Hurco Max Table: 760mm x 355mm ATC: 16 Spindle speed: 8000 rpm Spindle power: 15 HPPrice on request
United Kingdom
Year: 2007
Traverses XYZ: 660 x 356 x 457mm Spindle Speed: 8000rpm Spindle Motor Power: 11kW Control: Hurco MAX Control Tool Change Capacity: 16 Station Table Size: 762 x 356mm Tool Size: DIN40 Software Options: Ulti-Pockets, Rigid Tapping, Advanced Velocity Control, Ramp/Helical Entry, Floppy Drive, Graphics, Extended HDD, Extended Memory Description: Coolant, Interlocked guards, Low Volt LightPrice on request
United Kingdom
Year: 2004
TABLE SIZE 762 X 356MM TRAVERSES XYZ 660 X 356 X 457MM SPINDLE MOTOR POWER 11KW SPINDLE SPEED 8000RPM TOOL CHANGE CAPACITY 16 STATION TOOL SIZE DIN40 TESTED AND READY TO GO VIEWING WELCOMEPrice on request
United Kingdom
Year: 2004
X : 660 mm Y : 356 mm Z : 457 mm Coolant system Tool change capacity : 16 stationPrice on request
United Kingdom
Year: 2005
Control Hurco Max Control Table Size 762 x 356mm Traverses XYZ 660 x 356 x 457mm Spindle Motor Power 11kW Spindle Speed 8000rpm Tool Change Capacity 16 Station Tool Size DIN40Price on request
United Kingdom
Year:
Control Hurco Max Control Table Size 762 x 356mm Traverses XYZ 660 x 356 x 457mm Spindle Motor Power 11kW Spindle Speed 8000rpm Tool Change Capacity 16 Station Tool Size DIN40Price on request
United Kingdom
Year: 2005
Control Hurco Max Control Table Size 762 x 356mm Traverses XYZ 660 x 356 x 457mm Spindle Motor Power 11kW Spindle Speed 8000rpm Tool Change Capacity 16 Station Tool Size DIN40Price on request
United Kingdom
Year: 2007
Year 11/2007, First Installation 02/2008 Numerical Control Ultimax 2 Video Screens, Remote Electronic Handwheel Automatic tool changer with double exchange arm with 24-place Random magazine, Collector Nozzle Cooling System Around Spindle Nose, Collection Tanks Shavings and coolants, Auger for chip evacuations, User books and maintenance, Certification CE X axis travel 660 mm - Y axis travel 350 mm - Z axis travel 450 mm Table dimensions / pallet 760 X 350 Mm X Mm Spindle taper ISO 40 - rpm …Price on request
Italy
Year: 2005
Control Hurco Max Control Table Size 762 x 356mm Traverses XYZ 660 x 356 x 457mm Spindle Motor Power 11kW Spindle Speed 8000rpm Tool Change Capacity 16 Station Tool Size DIN40Price on request
United Kingdom
Year: 2003
Brand: Hurco Type: VM1 Year of construction: 2003 X-axis: 660 mm Y-axis: 350 mm Z-axis: 450 mm Rotation speed: 8000 Rpm Country of origin: USAPrice on request
Netherlands
Year: 2002
Table Size 30" x 14" Maximum Weight on Table 750 LBS X-Axis Travel 26" Y-Axis Travel 14" Z-Axis Travel 18" Rapid Traverse Rates (X&Y / Z) 750 / 500 IPM Spindle Taper CAT 40 Spindle Speeds 8000 RPM Spindle Drive Motor 15/10 HP Spindle Torque 54 ft. lbs. @ 1450 RPM Automatic Tool Changer Capacity 16 (Sidemount/Swing Arm) Maximum Tool Diameter 3.5" / 5" Maximum Tool Length 9.8" Maximum Tool Weight 15.5 LBS Approximate Machine Dimensions 91" x 78" x …Price on request
USA
Year: 2006
X,Y,Z: 660X350X450 mm very good conditionPrice on request
Croatia
Year: 2006
Control: Hurco Max Spindle Motor Power: 11kW Spindle Speed: 8000rpm Spindle Taper: ISO40 Table Size: 762 x 356mm Tool Change Capacity: 16 Station Tool Size: DIN40 Traverses XYZ: 660 x 356 x 457mm Description: Coolant, Interlocked guards, Low Volt LightPrice on request
United Kingdom
Year: 2003
Measurements Table Mm 760 X 350 Max Weight On Table 500 Kg Axis X Mm 660 Y Axis Mm 355 Z Axis Mm 455 Spindle Speed Rpm 10000 Tools In Stock N ° 16 Spindle connection ISO 40 Motor Power Spindle Kw 7.8 Measurements Machine Mm 2500 X 1700 X 2000 Machine weight Kg 2900Price on request
Italy
Year: 2004
Control: Hurco MAX Spindle Speed: 8000rpm Table Size: 762 x 356mm Taper: DIN40 Tool Change Capacity: 16 Traverses XYZ: 560 x 356 x 457mmPrice on request
United Kingdom
Year: 2006
Control Hurco Max Control Maximum workpiece weight 340kg Table Size 762 x 356mm Traverses XYZ 660 x 356 x 457mm Rapid Feedrates XYZ: 19 x 19 x 19M/MINUTE Spindle Motor Power 7.5kW Spindle Speed 8000rpm Tool Change Capacity 16 Station Tool Size DIN40 Machine Dimensions 2311 x 1981 x 2438mm Machine Weight 2954kgPrice on request
United Kingdom
Year: 2002
X-AXIS TRAVEL 26" Y-AXIS TRAVEL 14" Z-AXIS TRAVEL 18" TABLE SIZE 30" X 14" SPINDLE MOTOR 15/10 HP SPINDLE SPEED 8,000 RPM SPINDLE TAPER CAT 40 TOOL CHANGER ( DUAL ARM ) 20 ATC RAPID TRAVERSE RATES ( X & Y/ Z ) 750 / 500 IPM MACHINE DIMENSIONS ( L X W X H ) 90.6" X 77.2" X 95.5 MACHINE WEIGHT 6,825 LBS Equipped With: HURCO UltiMAX CONTROL RIGID TAPPING FLOPPY DRIVE GRAPHICS EXTENDED HDD EXTENDED MEMORY ALL …Price on request
USA
Year: 2005
EQUIPPED WITH: HURCO WINMAX CNC WITH TOUCHSCREEN ULTIPOCKETS RIGID TAPPING ULTINET RAMP/HELICAL ENTRY INSERT POCKETS FLOPPY DRIVE SURFACE FINISH QUALITY ETHERNET PORT, USB PORT DUAL ARM TOOL CHANGERPrice on request
USA
Year: 2002
Table Size 30" x 14" Maximum Weight on Table 750 LBS X-Axis Travel 26" Y-Axis Travel 14" Z-Axis Travel 18" Rapid Traverse Rates X&Y/Z 750 / 500 IPM Spindle Taper CAT 40 Spindle Speeds 8000 RPM Spindle Drive Motor 15/10 HP Spindle Torque 54 ft. lbs. @ 1450 RPM Automatic Tool Change Capacity 16 Tools Maximum Tool Diameter 3.5" / 5" Maximum Tool Length 9.8" Maximum Tool Weight 15.5 LBS Approximate Machine Dimensions 91" x 78" x96" Approximate Machine Weight …Price on request
USA
Year: 2003
Specifications Control: Max CNC Table: 14" x 30" Maximum Table Load: 750 lbs X-Axis Travel: 26" Y-Axis Travel: 14" Z-Axis Travel: 18" Main Motor: 15 hp Tool Changer Positions: 16 atc -EQUIPPED WITH- Exteneded Coolant Capacity Chip Auger Misc. Tooling *Spindle Replaced 2009*Price on request
USA
Year: 2007
Hurco Max Touch Screen Control Coolant System Work Light Rigid Tapping Age: 2007 X Axis Travel......................26" Y Axis Travel......................14" Z Axis Travel......................18" Table Size.........................30" x 14" Max Table Load: ...................750 lbs. Spindle Taper......................CAT 40 Spindle Speed......................8000 RPM Spindle Motor......................15 HP Tool Capacity......................16 ATC Machine Dimensions.................96"L x 62"W x 72" H Machine Weight..................... 6,250 lbs Under PowerPrice on request
USA
Year: 2007
Control Max Win Table size 760 mm x 355 mm Table load 350 kgs Longitudinal traverse X axis 650 mm Cross traverse Y axis 350 mm Vertical traverse Z axis 450 mm Speeds upto 8,000rpm Feed rate upto 24m/min Spindle taper bt 40 Automatic tool changer yes Number of tools 20 Input 415/3/50 11 kw Length 7' 4" Width 6' 4" Height 8' 4" Nett weight Actual 2,860 KilosPrice on request
United Kingdom
Year: 2007
Year: 2007 First installation CNC: Ultimax Spindle speed: 10,000 rpm. Racing : X: 660mm Y: 350 Mm Z: 450 Mm Tool Magazine: 16 Positions (Already Including Different Cones With Tools) Cone: ISO 40 Accessories : N ° 3 Precision Vices Supplied. Perfect Machinery! Prompt deliveryPrice on request
Italy
Year: 2002
Table Size 30" x 14" Max. Weight on Table 750 lbs Spindle Nose to Table 4" X-axis Travel 26" Y-axis Travel 14" Z-axis Travel 18" Rapid Traverse Rates XYZ 945 IPM Spindle Taper CAT40 Spindle Speed 8000 RPM Spindle Drive Motor 15 HP Spindle Torque 54 ft lbs@1450 RPM ATC Capacity 16 Tools (Sidemount/Swing Arm) Max Tool Diameter 3.5"/5" Adjacent Max. Tool Length 9.8" Max. Tool Weight 15 lbs Machine Dimensions 91" x 78" x 96" Machine Weight 7000 lbs …Price on request
USA
Year: 2003
Travel distances: X : 660 mm Y : 355 mm Z : 455 mm Machine dimensions: 2500x 2000 m m Spindle speed: 9000/min. Machine weight: 3400 kg Control system: ULTIMAXPrice on request
Czech Republic
Year: 2005
Control Hurco Max Control Table Size 762 x 356mm Traverses XYZ 660 x 356 x 457mm Spindle Motor Power 11kW Spindle Speed 8000rpm Tool Change Capacity 16 Station Tool Size DIN40Price on request
United Kingdom
Year: 2006
Control: Hurco Max Spindle Motor Power: 11kW Spindle Speed: 8000rpm Table Size: 762 x 356mm Tool Change Capacity: 16 Station Tool Size: DIN40 Traverses XYZ: 660 x 356 x 457mmPrice on request
United Kingdom
Year: 2006
Specifications Manufacturer Hurco Model VM1 Year 2006 Condition UsedPrice on request
USA
Year: 2005
Table Size 30" x 14" Maximum Weight on Table 750 LBS X-Axis Travel 26" Y-Axis Travel 14" Z-Axis Travel 18" Rapid Traverse Rates XYZ 945 IPM Spindle Taper CAT 40 Spindle Speeds 8000 RPM Spindle Drive Motor 15 HP Spindle Torque 54 ft-lbs @ 1450 RPM Automatic Tool Changer Capacity 16 Tools Maximum Tool Diameter 3.5" / 5" Maximum Tool Length 9.8" Maximum Tool Weight 15 LBS Approximate Machine Dimensions 91" x 78" x 96" Approximate Machine Weight 7000 LBS …Price on request
USA
Year:
Hurco machining center model: VM1Price on request
Italy
Year: 2009
Control Hurco Max Control Maximum workpiece weight 340kg Table Size 762 x 356mm Traverses XYZ 660 x 356 x 457mm Rapid Feedrates XYZ: 19 x 19 x 19M/MINUTE Spindle Motor Power 7.5kW Spindle Speed 8000rpm Tool Change Capacity 16 Station Tool Size DIN40 Machine Dimensions 2311 x 1981 x 2438mm Machine Weight 2954kgPrice on request
United Kingdom
Year: 2005
Year: 2005 Make: Hurco Model: VM1 Additional Equipment: 4th Table can be supplied for extra cost Control: Hurco Max Spindle Motor Power: 11kW Spindle Speed: 8000rpm Table Size: 762 x 356mm Tool Change Capacity: 16 Station Tool Size: DIN40 Traverses XYZ: 660 x 356 x 457mm Description: Coolant, Interlocked guards, Low Volt Light, 4th Axis InterfacePrice on request
United Kingdom
Year: 2005
Control Hurco Max Control Table Size 762 x 356mm Traverses XYZ 660 x 356 x 457mm Spindle Motor Power 11kW Spindle Speed 8000rpm Tool Change Capacity 16 Station Tool Size DIN40Price on request
United Kingdom
Year: 2005
Control Hurco Max Control Table Size 762 x 356mm Traverses XYZ 660 x 356 x 457mm Spindle Motor Power 11kW Spindle Speed 8000rpm Tool Change Capacity 16 Station Tool Size DIN40Price on request
United Kingdom
Year: 2005
Control Hurco Max Control Table Size 762 x 356mm Traverses XYZ 660 x 356 x 457mm Spindle Motor Power 11kW Spindle Speed 8000rpm Tool Change Capacity 16 Station Tool Size DIN40Price on request
United Kingdom
Year:
Control Hurco Max Control Table Size 762 x 356mm Traverses XYZ 660 x 356 x 457mm Spindle Motor Power 11kW Spindle Speed 8000rpm Tool Change Capacity 16 Station Tool Size DIN40Price on request
United Kingdom
Year: 2006
Control: Winmax Country of Origin: U.S.A. x-axis: 660 mm y-axis: 350 mm z-axis 450 mm Spindle speed: 8000 RpmPrice on request
Netherlands
Year: 2007
year 2007 Races: 660 x 355 x 457 mm HURCO Cnc WINMAX Table length: 762 mm Table width: 355 mm 16 tools Spindle cone: CAT 40 Maximum spindle speed 10000 toursPrice on request
France
Year: 2006
Spindle motor power: 11kW spindle speed: 8000 Tr spindle taper: ISO40 Table size: 762 x 356mm 16-position tool changer Race XYZ: 660 x 356 x 457 mm 2006Price on request
France
Year: 2007
Hurco MAX CNC Control Rigid Tapping Kurt Vise All Available Tool Holders (Approx. 20) Side Mounted 20 ATCPrice on request
USA
Year: 2007
Races: 660 x 355 x 457 mm HURCO Cnc WINMAX Table length: 762 mm Table width: 355 mm 16 tools Spindle cone: CAT 40 Maximum spindle speed 10000 toursPrice on request
France
Year: 2009
YOM 2009 X 660.4 mm Y 355.6 mm Z 457.2 mm Power 7.5 kW RPM 8,000 RPM # ATC 16 Table-W 355.6 mm Table-L 736.6 mm Taper CAT-40 Weight 8400 (LBS) Control CNC (HURCO MAX)Price on request
United Kingdom
Year: 2011
Used Hurco VM1 Machining center - 5 axis with super accessorized automatic tool change Semi new all overhauled re-branded with aspirator and screw compressor and Eletrico APC group, available for any test Sale's reason: change in production.Price on request
Italy