Ideal 6550-95 EP

Year: 2001

Year: 2005

It is an automatic guillotine with programmable control module backgauge allowing professional cutting of 65 cm in length. It provides digital measurement readout and optical cutting line with LED's Carcateristicas: - Programmable Guillotine German manufacturing. - Electromechanical driver blade, ram and backgauge. - Two lateral guides on the front and back of the table. - Memory for repeat cuts. - Control Module backgauge programmable "EP", for 99 programs with 99 steps. - Key "SET" function to set the reference measurement. …

Year:

Guillotina Ideal 6550, good condition.

Year:

electro-mechanical blade drive system automatic pressure device programmable electronic control to move the backgauge direct entry of dimensions on the keypad digital display dimensions storing repetitive cuts 9 programs each with 9 cutting positions electronic knurled knob for the progressive movement of the backgauge SET function for moving the backgauge to the reference dimension paper ejection programmable function materialization of the optical cutting line with metal stand and storage shelf paper depth table: 610 mm Minimum cut: 25 mm

Year:

IDEAL - 6550-95 EP MASSICOT 65,220 V

Year: 2005

electro-mechanical blade drive system automatic pressure device programmable electronic control to move the backgauge direct entry of dimensions on the keypad digital display dimensions storing repetitive cuts 9 programs each with 9 cutting positions electronic knurled knob for the progressive movement of the backgauge SET function for moving the backgauge to the reference dimension paper ejection programmable function materialization of the optical cutting line with metal stand and storage shelf paper depth table: 610 mm Minimum cut: 25 mm with …

Year: ~ 2009

In excellent condition. This guillotine with 65 cm cutting length allows cutting and deburring particularly economically. The blade electromechanical drive, the automatic clamp, the programmable control module'ep' backgauge, direct preset angle position via the keypad with 10 buttons and digital measurement reading offer some facilities operating that satisfy the most demanding professionals. Characteristics: electromechanical driver blade, rammer and backgauge Two lateral guides in the front and rear of the table Memory for repeat cuts Programmable control module backgauge'EP' for 9 …

Year: 2013