Manufacturer | Illig |
---|---|
Model | RV 53 |
Category | Thermoforming - Automatic Roll-Fed Machines |
Max sheet length | 500 mm |
Max sheet width | 350 mm |
Forming depth | 100 mm |
Engine Power | 23.3 kW |
------------------- | |
Length x width x height | 6330.0 × 1930.0 × 2050.0 |
Weight | 3000 kg |
Year: 2012
Used machine for sale, Illig RV 53. Manufacture date: 2012. The machine has been regularly serviced, machine is in working condition and is currently still being used.Price on request
Slovenia
Year: 1991
Price on request
France
Year: 1991
Price on request
France
Year: 1991
Price on request
France
Year: 1991
Price on request
France
Year: 1990
Applications : Formage film positif (table inférieure fixe) Options : # Porte-bobine pour bobine jusqu'à diamètre 600 mm avec déroulement automatique # Entrée de feuille adaptée pour feuille préchauffée # Transport de feuille entraîné par moteur électrique, précision +/- 0,3 mm # Cadence maximum 15 cycles / minute # Chauffage supérieur longueur = 875 mm, régulation par double-rangées longitudinales et coupure automatique d'une rangée transversale (125 mm) # Entraînement pneumatique du chauffage # Poste de formage par le vide pour …Price on request
France
Year:
- Porte-bobine pour bobine jusqu’à diamètre 600 mm avec déroulement automatique - Entrée de feuille adaptée pour feuille préchauffée - Transport de feuille entraîné par moteur électrique, précision +/- 0,3 mm - Cadence maximum 15 cycles / minute - Chauffage supérieur longueur = 875 mm, régulation par double-rangées longitudinaleset coupure automatique d’une rangée transversale (125 mm) - Entraînement pneumatique du chauffage - Poste de formage par le vide pour formage positif (moule sur table inférieure) et formage négatif (moule sur …Price on request
Germany
Year: 1990
Machine automatique de formage par le vide pour une production rationnelle de pièces en petites et moyennes séries, en thermoformage positif et négatif et avec une découpe automatique par outils à filets. Système de changement rapide de série avec sauvegarde des paramètres de production inclus. Surface de formage maximum 500 x 350 mm Hauteur de formage au-dessus 100 Puissance de découpe 200 kN Hauteur de formage positif/négatif 100/30 Equipements standard de base: • Porte-bobine pour bobine jusqu’à diamètre 600 mm …Price on request
Germany
Year: 2005
not much usedPrice on request
Germany
Year: 1998
Spool to spool up to 600 mm diameter with automatic sequence Fitted sheet input paper heated for Sheet transport motor-driven actuator Maximum rate 23 cycles / minute Higher heating length = 875 mm, regulation by double-longitudinal rows and automatic disconnection of a transverse row (125 mm) Pneumatically driven heating Forming station vacuum-forming positive (pan on table below) and forming negative (pan on table top) automatic bubbling Upper and lower frames moving Digital adjustment of the rates of upper and lower …Price on request
France
Year: 2000
Stations Forming, Cutting and Stacking Max Forming Area 500 x 350 mm Min Forming Area 300 x 100 mm Depth of Draw 100 / 40 mm Max Mould Closing Force 55 kN Forming Pressure 2 bar Cycles/Min 23 Total Width 2320 mm Total Length 7420 mm Total Height 2230 mm Total Weight 5600 kgPrice on request
United Kingdom
Year: 1988
Year: 1988 Location: Europe Brand: ILLIG Model: RV 53 Status: For sale Delivery time: Immediate Technical Specifications Forming area (VxH): 500x350 Depth of draw: 100 mm Other Specifications Automatic Vaccum former Forming, Cutting, Separating Forming area (mm) 500 x 350 Film width (mm) 540 Upper heater 9,5 kW Lower heater 5,6 kW Punching area 500 x 350 mm Punching force 200 kN Speed 15 cycles/min Machine overhauled in 2009 - new vacuum pump - new chains - new heaters Not …Price on request
Poland
Year: 1992
Stations Forming, Cutting and Stacking Maximum Forming Area 500 x 350 mm Minimum Forming Area 300 x 100 mm Height of Forming Above-Below Material 100 / 30 mm Maximum Cycles-Minute 20 Total Width incl Control Cabinet 1930 mm Total Length incl roll stand 6330 mm Total Height 2050 mm Total Weight 3000 kgPrice on request
United Kingdom
Year: 1999
Max Forming Area 500 x 350 mm Min Forming Area 300 x 100 mm Height of Material Forming Above-Below Level 100/40 mm Max Mould Closing Force 55 kN Pressure forming 2 bar Cycles Max / Min Total 25 Incl Width Control Cabinet 2320 mm Total Length incl Roll Stand 7420 mm total Height 2230 mm total Weight 5600 kg Notes All details are subject to change and / or errors. All equipment is subject to availability and / or prior …Price on request
France
Year: 1994
Max Forming Area 500 x 350 mm Minimum Forming Area 300 x 100 mm Height of Material Forming Above-Below 100/30 mm Maximum Cycles Minute Total 20 Incl Width Control Cabinet 1930 mm Total Length incl roll stand 6330 mm total Height 2050mm total Weight 3000 kg Notes All details are subject to change and / or errors. All equipment is subject to availability and / or prior sale.Price on request
France
Year: 1996
Max Forming Area 500 x 350 mm Minimum Forming Area 300 x 100 mm Height of Material Forming Above-Below 100/30 mm Maximum Cycles Minute Total 20 Incl Width Control Cabinet 1930 mm Total Length incl roll stand 6330 mm total Height 2050mm total Weight 3000 kg Notes All details are subject to change and / or errors. All equipment is subject to availability and / or prior sale.Price on request
France
Year: 1992
cleaned machine renews all electrical, mechanical and pneumatic defective parts, repainted, tested, ready to function with decrease in the dry run, all pneumatic. Cylinders resealed, Mold surface 350 x 500 mm Film width max. 540 mm Molding height max. 100 mm positive / negative 40mm Year 1992 Equipment: · Upper Heating longitudinal row control · Underheater longitudinal row control · Servo drive for film transport +/- 0.2mm accuracy · Pneumatic Heizfahrbewegung · Punching station with movable lower table · Strip …Price on request
Germany
Year: 2005
Year 2005 Forming Area 500 x 350 mm Minimum Forming Area 300 x 100 mm Height of Forming Above-Below Material 100 / 30 mm Maximum Cycles-Minute 20 Total Width incl Control Cabinet 1930 mm Total Length incl roll stand 6330 mm Total Height 2050 mm Total Weight 3000 kgPrice on request
United Kingdom
Year: 2001
Manufacturer Illig Model RV 53 Year 2001 Condition Used Approx hours 15,541 Stations Forming, Cutting and Stacking Maximum forming area 500 x 350 mm Minimum forming area 300 x 100 mm Height of forming above-below material 100 / 30 mm Maximum cycles-minute 20 Total length incl roll stand 6330 mm Total width incl control cabinet 1930 mm Total height 2050 mm Total weight 3000 kgPrice on request
United Kingdom
Year:
Materials to be processed: PET/PE/PP/PS/HIPS/PVC Min and max material thickness: 0.18 – 1,3 mm Machine Feeding: Roll Fed Max Roll Diameter: 600 mm Type of unwinding: Semi-automatic Min and Max forming area: Min: 500 x 380 mm | Max: 500×350 mm Forming depth Positive and Negative: +100/-30 mm Forming: Pneumatic (air) Temperature regulation: Heating at top and bottom Vacuum pump: Yes Length of inferior heating: 500mm bottom heating Air Pressure: 6 Bar Cycles: 20 p/m (depending on material, material thickness …Price on request
Denmark
Year: 1994
Thermoforming machine role Vacuum Forming Machine Form size 350 x 500 mm Film width max. 540 mm Mold height max. 100 mm positive / negative 40mm equipment: Top heater longitudinal row control Underheater longitudinal row control Servo drive for film transport +/- 0.2mm accuracy pneumatic Heizfahrbewegung Punching station with movable lower table stacking station Counting and Ausschiebstation pneumatic Restfolienwickler motorized FolienabrollvorrichtungPrice on request
Germany
Year: 1990
ILLIG RV 53 REEL TO REEL VACUUM FORMING MACHINE WITH STEEL RULE CUTTER AND STACKING STATIONPrice on request
United Kingdom
Year: 1999
Manufacturer Illig Model RV 53 Year 1999 Approx Hours 32714 Stations Forming and Cutting Maximum forming area 500 x 350 mm Minimum forming area 300 x 100 mm Height of forming above-below material 100 / 30 mm Maximum cycles-minute 20 Total width incl control cabinet 1930 mm Total length incl roll stand 6330 mm Total height 2050 mm Total weight 3000 kgPrice on request
United Kingdom
Year:
Price on request
Spain
Year: 1994
Maximum Forming Area 500 x 350 mm Minimum Forming Area 300 x 100 mm Height of Forming Above-Below Material 100 / 30 mm Maximum Cycles-Minute 20 Total Width incl Control Cabinet 1930 mm Total Length incl roll stand 6330 mm Total Height 2050 mm Total Weight 3000 kgPrice on request
United Kingdom
Year: 1994
vacuum thermoforming machine forming area 350 x 500 mm max. material width 540 mm depth of draw 100 mm positive, 30mm negative power supply total 19,3 kW capacity of compressor 1200NL/min. EQUIPMENT: - motor driven foil unreel unit - top- and bottom heater with row regulation ceramic elements - upper/lower clamping frame - foil transport with SERVO motor exactness +/- 0,2 mm - cutting press with movable top and bottom table - max. closing force 20 to - Stacking station …Price on request
Germany
Year: 1999
AUTOMATIC VACUUM FORMING: RV 53 1999 Automatic machine for forming the blank for a rational production of parts small and medium series in positive and negative thermoforming and cutting with a automatic tools nets. Quick-change system with backup serial production parameters included. Forming surface maximum 500 x 350 mm Forming height above / below the plane of the sheet 100/30 mm Power cut 200 kN Basic standard equipment: • Door-to coil up coil diameter 600 mm with automatic sequence and …Price on request
Spain
Year: 2000
Approx hours 73,787 Stations Three Delivery date Immediately Maximum forming area 500 x 350 mm Minimum forming area 300 x 100 mm Depth of draw 100/40 mm Max film width 550 mm Operating pressure 2 bar Max dry cycles / min 22Price on request
United Kingdom
Year: 1992
ILLIG RV 53 Upper Heating longitudinal row control Indramat - Servo drive for ± 0.2 mm accuracy Pneumatic Heizfahrbewegung 3 High Handrails punching station with movable lower table stacking station counting and ejecting station Pneumatic winding station Steel Heating Motorized Roll dispenser Machine cleaned, all electrical, mechanical and pneumatic defective parts renewed, newly painted, tested, operational with the decrease in dry operation. new lacqueredPrice on request
Germany
Year: 1991
Forming area : 350x500mm max Forming area : 100x300mm min Height of forming : max 100 min 30mm Widht of material : max 540 min 340mm Stroke of lower frame : 45mm Force of table stroke : 3kN Diameter of material roll : 600mm Punching area on upper table : 350x500mm Punching area on lower table : 335x500mm Punching pressure : 200kN Number of cycle : 20Price on request
United Kingdom
Year: 1988
completely overhauled RV 53 500x350x100, with punch, movable lower table, stacking and residual material on winding. Upper Heating longitudinal row control Indramat - Servo drive for + -0,2mm accuracy Pneumatic hot travel movement punching station with movable lower table stacking station counting and ejecting station Pneumatic winding station strip steel heating Motorized AbrollbockPrice on request
Germany
Year: 2001
Make Illig Model RV 53b Year2001 Delivery Date Immediately Stations Forming / Cutting / Stacking Max Forming Area 500 x 350 mm Min Forming Area 300 x 100 mm Height of Forming Above-Below Material Level100 / 40 mm Max Mould Closing Force 55 kN Forming Pressure 2 bar Max Cycles/Min 25 Total Width incl Control Cabinet 2320 mm Total Length incl Roll Stand 7420 mm Total Height 2230 mm Total Weight 5600 kgPrice on request
United Kingdom
Year: 1998
- ILLIG RV 53 1998 - Format 500 x 350 mm - Table movable cutting (100 / 40mm) - Stacker - Machine with PLC blanchée P 03 - 18,000 hours, of which 16,000 cleanroom - Machine in very good condition. Knee renovated cutting.Price on request
Netherlands
Year: 2005
Specifications Manufacturer Illig Model RV 53 Year 2005 Condition Used Stations Forming / Cutting / Stacking Maximum forming area 500 x 350 mm Minimum forming area 300 x 100 mm Height of forming above-below material 100 / 30 mm Maximum cycles-minute 20 Total width incl control cabinet 1930 mm Total length incl roll stand 6330 mm Total height 2050 mm Total weight 3000 kgPrice on request
United Kingdom
Year: 1984
Illig RVP 54 converted to RV 54 with Indramat. Year: 1984 and transformed in 2000, completely revised. Forming format: 520 x 385 mm - maximum film width: 560 mm Forming depth: 100 mm (positive and negative) Thermoformer at 5 stations: 1. Forming 2. Cutting 3. Stacking 4. Waste Crushing 5. Blowing waste in plastic bags Cutting press: force 65 tons Up to 25 cycles per minute Fully automatic linePrice on request
Belgium
Year: 1992
Year 1992 Delivery Date Immediately Stations Forming and Cutting Maximum Forming Area 500 x 350 mm Minimum Forming Area 300 x 100 mm Height of Forming Above-Below Material 100 / 30 mm Maximum Cycles-Minute 20 Total Width incl Control Cabinet 1930 mm Total Length incl roll stand 6330 mm Total Height 2050 mm Total Weight 3000 kgPrice on request
United Kingdom
Year: 1994
Illig RV 53 1994 Maximum Forming Area 500 x 350 mm Minimum Forming Area 300 x 100 mm Height of Forming Above-Below Material 100 / 30 mm Maximum Cycles-Minute 20 Total Width incl Control Cabinet 1930 mm Total Length incl roll stand 6330 mm Total Height 2050 mm Total Weight 3000 kgPrice on request
United Kingdom
Year:
Materials to be processed: PET/PP/PS/ ABS Min and max material thickness: 0,18-1,3mm Machine feeding: Roll feed Type of unwinding: Pneumatic Min and max forming area: 300 x 100mm 500 x 350mm Min and max forming depth Positive and Negative: 30mm 100mm Forming: Pneumatic (air) Vacuum pump: No is centralised Air pressure: 6 Bar Cooling: yes Cycles: 22 p/m (depending on material , material thickness and mould) Stacking unit: Yes Type: horizontal Counter: No Tool Change: Manual Accessories: Cooling unit Single …Price on request
Denmark
Year: 1996
Only 9,600 hours Forming station Single cutting Without stacker Reel feed standPrice on request
Netherlands
Year: 1990
Illig Model RV 53 Year 1990 Delivery Date Immediately Stations Forming, Cutting and Stacking Maximum Forming Area 500 x 350 mm Minimum Forming Area 300 x 100 mm Height of Forming Above-Below Material 100 / 30 mm Maximum Cycles-Minute 20 Total Width incl Control Cabinet 1930 mm Total Length incl roll stand 6330 mm Total Height 2050 mm Total Weight 3000 kgPrice on request
United Kingdom
Year: 2000
Vacuum / compressed air former RV 53 b 1 ILLIG RV 53 b with punch Machine cleaned, all electrical, mechanical and pneumatic defective parts renewed, tested, ready for operation with acceptance in dry running. RV 53 Forming tools and clamping frames can be used Shaped area 350 x 500 mm Foil width max. 540 mm Molding height max. 100 mm positive / 40mm negative Mold pressure max. 2 bar El. Connection: 3 / PEN, 50 Hz, 400 V Year of …Price on request
Germany
Year: 2000
Approx hours 64,880 Stations Three Delivery date Immediately Maximum forming area 500 x 350 mm Minimum forming area 300 x 100 mm Depth of draw 100/40 mm Max film width 550 mm Operating pressure 2 bar Max dry cycles / min 22Price on request
United Kingdom
Year: 1999
Machine entretenue mais marquée (vapeurs de PVC...) Max. Form Area 350 x 500 mm Depth of draw +/- 100/ 30 mm Max. material width 540 mmPrice on request
France
Year: 2001
Manufacturer Illig Model RV 53b Year 2001 Approx hours 47,000 Stations Three Delivery date January 2022 Maximum forming area 500 x 350 mm Minimum forming area 300 x 100 mm Depth of draw 100/40 mm Max film width 550 mm Operating pressure 2 bar Max dry cycles / min 22Price on request
United Kingdom
Year: 2015
Manufacturer Illig Model RV 53d Year 2015 Approx Hours 6700 Stations Forming, Cutting and Stacking Max Forming Area 500 x 365 mm Depth of Draw 100 / 40 mm Max Material Width 550 mm Forming Pressure 3 bar Max Cycles/Min 45 Total Width incl Control Cabinet 2600 mm Total Length incl Roll Stand 6750 mm Total Height 2590 mm Total Weight 6500 kgPrice on request
United Kingdom
Year: 1995
Manufacturer Illig Model RV 53 Year 1995 Stations Forming and Cutting Maximum forming area 500 x 350 mm Minimum forming area 300 x 100 mm Maximum cycles-minute 20 Height of forming above-below material 100 / 30 mm Total length incl roll stand 6330 mm Total width incl control cabinet 1930 mm Total height 2050 mm Total weight 3000 kgPrice on request
United Kingdom
Year:
Max Forming Area 500 x 350 mm Minimum Forming Area 300 x 100 mm Height of Material Forming Above-Below 100/30 mm Maximum Cycles Minute Total 20 Incl Width Control Cabinet 1930 mm Total Length incl roll stand 6330 mm total Height 2050mm total Weight 3000 kg Notes All details are subject to change and / or errors. All equipment is subject to availability and / or prior sale.Price on request
France
Year:
A RV 53 is sold completely overhauled, with movable lower table in the punch and stacking.Price on request
Germany
Year: 1992
1 vacuum thermoforming machine ILLIG type RV 53 forming area 350 x 500 mm max. material width 540 mm depth of draw 100 mm year 1992 EQUIPMENT: - motor driven foil unreel unit - top- and bottom heater with row regulation ceramic elements - upper/lower clamping frame - foil transport with SERVO motor exactness +/- 0,2 mm - cutting press with movable top and bottom table - max. closing force 20 to - Stacking station - waste winderPrice on request
Germany
Year: 1996
Our company produces PET and PVC film packaging. The machine is a complete production line. It has the following members: - foil feeder - a member for heating and forming the foil - blister cutting section - a section for packing in larger batches The device is fully functional. It produces packaging for us all the time, so the potential buyer can see how the machine works and undergo basic training with us. We have complete documentation for the machine …Price on request
Poland
Year: 1997
Manufacturer Illig Model RV 53 Year 1997 Stations Forming, Cutting and Stacking Maximum forming area 500 x 350 mm Minimum forming area 300 x 100 mm Height of forming above-below material 100 / 30 mm Maximum cycles-minute 20 Total length incl roll stand 6330 mm Total width incl control cabinet 1930 mm Total height 2050 mm Total weight 3000 kgPrice on request
United Kingdom
Year: 1991
ILLIG RV 53 THERMOFORMING MACHINE RECONDITIONED SIEMENS SIMATIC PANEL PLC MOBILE LOWER AND UPPER CUTTING STATION Location station LEYBOLD SV65 vacuum pump 55 ELSTEIN radiant heating elements + high temperature cable Wiring diagram and cd programming Supply of Schleicher rack and numerous cards.Price on request
France