Machine's specifications - Illig RV 74b Used machines

Manufacturer	Illig
Model	RV 74b
Category	Thermoforming - Automatic Roll-Fed Machines

Illig RV 74 Sheet processing machine Sold

Year: 1997

Make Illig Model RV 74 Year 1997 Approx Hours 50300 Delivery Date November 2013 Stations Forming / Cutting / Stacking Maximum Forming Area 700 x 500 mm Minimum Forming Area 400 x 250 mm Height of Forming Above-Below Material 120 / 40 mm Maximum Material Thickness 2.0 mm Max Cycles/Min 30 Total Weight 6,600 kg

Price on request

United Kingdom

Illig RV 74 Thermoforming - Automatic Roll-Fed Machine Sold

Year: 1996

Illig Model RV 74 Year 1996 Approx Hours 39,600 Delivery Date Immediately Stations Forming, Cutting and Stacking Maximum Forming Area 700 x 500 mm Minimum Forming Area 400 x 250 mm Height of Forming Above-Below Material 120 / 40 mm Maximum Material Thickness 2.0 mm Maximum Cycle Rate 30 / min Total Weight 6,600 kg

Price on request

United Kingdom

Illig rv 74 Thermoforming - Automatic Roll-Fed Machine Sold

Year: 1997

Illig RV74 coil thermoformer from 1997 Perfect condition. Date of 1997. Little turned : 35000h meter. Delivered with vacuum pump BUSCH MM1142BV Delivered with documentation and electrical diagram. Total weight : 2600Kg + 4000Kg. Transportable on standard trailer. Materials to be treated: PET / PE / PS / HIPS / PVC / HIPS / ABS Maximum material thickness: 2.0mm Feeding machine: rolled Max Roll diameter: 1200 mm Type of unwinding: semi-automatic Min and max training area: Min 400 × 250 …

Price on request

France

Illig RV 74b Thermoforming - Automatic Roll-Fed Machine Sold

Year: 2005

Description Machine will be going under fully refurbishment in our warehouse and will be available in approximately 1 months time. Specifications Manufacturer Illig Model RV 74b Year 2005 Condition Used Approx hours 22,680 Stations Four Delivery date June 2020 Maximum forming area 704 x 514 mm Minimum forming area 400 x 250 mm Depth of draw 120/40 mm Max film width 760 mm Sheet thickness range 0.18 - 2 mm Operating pressure 2 bar Max dry cycles / min 35

Price on request

United Kingdom

Illig RV 74 Thermoforming - Automatic Roll-Fed Machine Sold

Year: 1993

Hours Approx 22700 Delivery Date Immediately Stations Forming, Cutting and Stacking Maximum Forming Area 700 x 500 mm Minimum Forming Area 400 x 250 mm Depth of Draw Above-Below 120 / 40 mm Maximum Material Thickness 2.0 mm Maximum Cycle Rate 30 / min Total Weight 6,600 kg

Price on request

United Kingdom

Illig RV 74 Thermoforming - Automatic Roll-Fed Machine Sold

Year: 2001

Max Forming Area 700 x 500 mm Minimum Forming Area 400 x 250 mm Height of Material Forming Above-Below 120/40 mm Maximum Material Thickness 2.0 mm Maximum Cycle Rate 30 / min total Weight 6.600 kg Notes All details are subject to change and / or errors. All equipment is subject to availability and / or prior sale.

Price on request

United Kingdom

Illig RV 74 Thermoforming - Automatic Roll-Fed Machine Sold

Year: 1998

Year 1998 Approx Hours 51,000 Stations Forming, Cutting and Stacking Maximum Forming Area 700 x 500 mm Minimum Forming Area 400 x 250 mm Height of Forming Above-Below Material 120 / 40 mm Maximum Material Thickness 2.0 mm Maximum Cycle Rate 30 / min Total Weight6,600 kg

Price on request

United Kingdom

Illig RV 74b Thermoforming - Sheet Processing Machine Sold

Year: 2005

Manufacturer Illig Model RV 74b Year 2005 Approx hours 41,350 Stations Three Maximum forming area 704 x 514 mm Minimum forming area 400 x 250 mm Depth of draw 120/40 mm Max film width 760 mm Sheet thickness range 0.18 - 2 mm Operating pressure 2 bar Max dry cycles / min 35

Price on request

United Kingdom

Illig RV 74b Thermoforming - Sheet Processing Machine Sold

Year: 2004

Manufacturer Illig Model RV 74b Year 2004 Approx hours 42,814 Stations Three Maximum forming area 704 x 514 mm Minimum forming area 400 x 250 mm Depth of draw 120/40 mm Max film width 760 mm Sheet thickness range 0.18 - 2 mm Operating pressure 2 bar Max dry cycles / min 30

Price on request

Unknown country

Illig RV 74 Thermoforming - Automatic Roll-Fed Machine Sold

Year: 2007

Max Forming Area 700 x 500 mm Minimum Forming Area 400 x 250 mm Height of Material Forming Above-Below 120/40 mm Maximum Material Thickness 2.0 mm Maximum Cycle Rate 30 / min total Weight 6.600 kg Notes All details are subject to change and / or errors. All equipment is subject to availability and / or prior sale.

Price on request

United Kingdom

Illig RV 74 Thermoforming - Sheet Processing Machine Sold

Year: 1993

Manufacturer Illig Model RV 74 Year 1993 Stations Forming, Hole Punching, Cutting and Stacking Maximum forming area 700 x 500 mm Minimum forming area 400 x 250 mm Height of forming above-below material 120 / 40 mm Maximum cycles-minute 20 Total weight 6600 kg Note: Photo only used for indication purposes.

Price on request

United Kingdom

Illig RV 74 Blowmoulding machine Sold

Year: 1998

Forming area maximum 680 x 500 mm Additional equipment for the equipment: Upper and lower heating, servo drive, belt pulling, starting automatics, waste winding machine, cutting down the movable lower and upper tables. If necessary, in addition: the start-up of equipment, commissioning and programming of a new modern controller by Schneider Electric

Price on request

Russia

Used ILLIG RV 74 Sheet processing machine Sold

Year: 1998

Electronically controlled by Programmable Logic Controller Schleicher stacker Control panel display with multi-zone Diagnostic aid Cycle counters and hour production Quick change tooling Width of the sheet transport positions and positions of cutting and stacking self-regulated Digital setting of no transport Voltage sheet by short stroke cylinders Press cutting 500 kN electromechanical Quick clamping of tools for forming and cutting Table forming extractable quick change tooling Digital setting races and speed tables Basic setting automatic

Price on request

France

Illig RV 74c Thermoforming - Sheet Processing Machine Sold

Year: 2009

Manufacturer Illig Model RV 74c Year 2009 Approx hours 29,776 Stations Three Maximum forming area 704 x 515 mm Minimum forming area 400 x 250 mm Depth of draw 120/40 mm Max film width 760 mm Sheet thickness range 0.18 - 2 mm Operating pressure 2 bar Max dry cycles / min 35

Price on request

United Kingdom

Illig RV 74b Thermoforming - Automatic Roll-Fed Machine Sold

Year: 2006

Manufacturer Illig Model RV 74b Year 2006 Condition Used Approx hours 22,300 Stations Three Delivery date June 2020 Maximum forming area 704 x 514 mm Minimum forming area 400 x 250 mm Depth of draw 120/40 mm Max film width 760 mm Sheet thickness range 0.18 - 2 mm Operating pressure 2 bar Max dry cycles / min 35

Price on request

United Kingdom

Illig RV 74b Thermoforming - Sheet Processing Machine Sold

Year: 2008

Stations 3 Delivery date Immediately Maximum forming area 704 x 514 mm Minimum forming area 400 x 250 mm Depth of draw 120/40 mm Max film width 760 mm Sheet thickness range 0.18 - 2 mm Operating pressure 2 bar Max dry cycles / min 30

Price on request

United Kingdom

Used Illig RV 74 Automatic Roll-Fed Machine For Forming/Punching Operation Sold

Year: 1997

Year 1997 Approx Hours 15600 Delivery Date April 2013 Stations Forming, Cutting and Stacking Maximum Forming Area 700 x 500 mm Minimum Forming Area 400 x 250 mm Height of Forming Above-Below Material 120 / 40 mm Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Price on request

United Kingdom

Illig RV 74 Thermoforming - Automatic Roll-Fed Machine Sold

Year: 1996

Year 1996 Approx Hours 39,600 Stations Forming, Cutting and Stacking Maximum Forming Area 700 x 500 mm Minimum Forming Area 400 x 250 mm Height of Forming Above-Below Material 120 / 40 mm Maximum Material Thickness 2.0 mm Maximum Cycle Rate 30 / min Total Weight 6,600 kg

Price on request

United Kingdom

Illig RV 74c Thermoforming - Sheet Processing Machine Sold

Year: 2013

Manufacturer Illig Model RV 74c Year 2013 Condition Used Approx hours 9,300 Stations Three Delivery date Immediately Maximum forming area 704 x 515 mm Minimum forming area 400 x 250 mm Depth of draw 120/40 mm Max film width 760 mm Sheet thickness range 0.18 - 2 mm Operating pressure 2 bar Max dry cycles / min 35

Price on request

United Kingdom

Illig RV 74 Thermoforming - Automatic Roll-Fed Machine Sold

Year: 1997

Manufacturer Illig Model RV 74 Year 1997 Approx hours 29,950 Stations Three Maximum forming area 700 x 500 mm Minimum forming area 400 x 250 mm Depth of draw 120/40 mm Max film width 750 mm Sheet thickness range 2 mm Max dry cycles / min 20

Price on request

United Kingdom

Illig RV 74 Thermoforming - Automatic Roll-Fed Machine Sold

Year: 1994

Max Forming Area 700 x 500 mm Minimum Forming Area 400 x 250 mm Height of Material Forming Above-Below 120/40 mm Maximum Material Thickness 2.0 mm Maximum Cycle Rate 30 / min total Weight 6.600 kg Notes All details are subject to change and / or errors. All equipment is subject to availability and / or prior sale.

Price on request

United Kingdom

Max sheet length	700 mm
Max sheet width	500 mm
Forming depth	40 mm
-------------------
Length x width x height	nan × nan × nan
Weight	6600 kg

Illig RV 74b

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?