Manufacturer | Krauss Maffei |
---|---|
Model | KM 500 - 2700 C2 |
Category | Injection moulding machines |
Clamping force | 500 T |
Screw diameter | 70 mm |
Tie bar spacing (H) | 900 mm |
Tie bar spacing (V) | 800 mm |
Shot volume | 1097 cm³ |
Shot weight | 998 g |
Pressure on material | 2389 bar |
Platen length | 1270 mm |
Platen width | 1200 mm |
Robot interface | |
Opening of the press | 1170 mm |
Mould size | |
------------------- | |
Length x width x height | 5690.0 × 2400.0 × 2510.0 |
Weight | 25000 kg |
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
Year: 1999
Min height: 480 mm Installation height: 0 mm Daylight: 1650 mm Machine with a water battery Machine without material hopper Including handling machine Levelers Air valve fixed WAP German screen text Interface for handling Hydraulic core pull. 2 x The injection molding machines, manufactured by Krauss Maffei, the C-series are designed for optimum availability. That ensured the high quality standards, which applies to Krauss Maffei design and manufacture of the machines. This injection molding machine is supplied with a Suhling …Price on request
Germany
Year: 2002
Price on request
Ukraine
Year: 2002
Specification: Clamping force: 5000 Kn. Platen size: 1270 x 1200 mm. Tie bar distance: 900 x 830 mm. Opening stroke: 1170 mm. Min. Mould thickness: 450 mm. Daylight max: 1650 mm. Screw diameter: 70 mm. Injection: 2389 bar. Injection volumen: 1097 cm3 . No core pulls installed. Hydraulic pump working hours: 67007 (pumps new in 2014). Screw new in 2014. Proportional valve and pressure sensor new in 2014.Price on request
USA
Year: 2004
clamping force: 5000 kN distance between tie bars h: 900 mm distance between tie bars v: 800 mm size of mould plates h: 1270 mm size of mould plates v: 1200 mm min. mould height: 830 mm max. open daylight: 2000 mm opening stroke: 1170 mm ejector stroke: 250 mm ejector force: 95 kN centring device diameter of moving platen: 200 mm centring device diameter of fixed platen: 200 mm mould weight: 7900 kg technical data:injection unit screw diameter: 70 …Price on request
Germany
Year: 1998
Year: 1998 Control unit: MC3F Injection Unit: .../2700 Screw diameter: 80 mm Injection pressure: 1829 bar Injection volume: 1433 ccm Shot capacity: 1304 g Clamping Unit: KM 500/... Clamping force: 500 t Platen size: 1270 x 1200 mm Distance between tie bars: 900 x 800 mm Mould height: 480 mm Opening storke: 1170 mm Max.Daylight: 1650 mm Ejector stroke: 250 mm Drive power of the hydraulic pump: 89 kW Cylinder heating power: 36 kW General information: Delivery time: Now Machine …Price on request
Poland
Year: 1998
Nominal capacity of pump motor: 75 kW Injection rate: 513 ccm/s Screw speed: 218 1/min Mould opening stroke: 920 mm Mould height min.: 380 mm Max daylight: 1300 mm Hydraulic ejector - stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Plasticising rate max.: 108 g/s Nozzle pressure: 173 kN Installed heating capacity: 36 kW Adjustable barrel heating zones: 7 Reservoir capacity: 720 ltr. Dimensions of the machine ca.: 6,91 m x 2,20 m x 2,41 m - Anti …Price on request
Germany
Year: 2002
KRAUSS MAFFEI KM500-2700 2002 Clamping force (ton) 500 Distance between tie bars (mm) 900 Distance between tie bars (mm) 800 Dimmension horizontal trays (H) (mm) 1270 Vertical dimension of the plates (V) (mm) 1200 Distance between plattens (Max.) (mm) 1650 Maximum opening (mm) 1170 Screw diameter (mm) 70 Ratio of screw L / D 23 injection volume (cm3) 1097 injection pressure (bar) 2389 2 hydraulic cores hydraulic accumulator Product used: PP productionPrice on request
Spain
Year: 2007
Manufacturer Krauss Maffei Type of machine KM 300 - 2700 C2 Year 2007 Controlversion MC 4 Screentext German Operating hours 53675 h Technical details Clamping unit Clamping force 3000 kN Mould opening force, max. 160 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min …Price on request
Germany
Year: 2002
Price on request
France
Year: 2000
Technical specifications, KM 500-2700 C1 + Robot Euromap 12 Clamping force 5000 kN Mounting plate 1270x1200 mm Distance between columns 900x800 mm Mounting height 480 mm Plate spacing 1650 mm Control MC4 English text Operating hours 57500 injection side Screw diameter 80 mm Stroke volume 1433 ccm Injection pressure 1829 bar Dimensions 7.36 x 2.33 x 2.51 m Pump drive power 75 kW Heating capacity 36 kW Oil filling 1075 l Total weight 25 tons Lacquer gray-white / cobalt-blue Miscellaneous …Price on request
Germany
Year: 1999
technical data clamping unit clamping force: 5000 kN distance between tie bars h:: 900 mm distance between tie bars v:: 800 mm size of mould plates h: 1270 mm size of mould plates v: 1200 mm min. mould height: 480 mm max. open daylight: 1650 mm opening stroke: 1170 mm ejector stroke: 250 mm ejector force: 95 kN centering diameter of moving platen: 240 mm centering diameter of fixed platen: 240 mm weight of mould: 7900 kg technical data injection …Price on request
Germany
Year: 1999
Manufacturer Krauss Maffei Type of machine KM 500 - 2700 C2 Year 1999 Controlversion MC 4 Technical details Clamping unit Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 124 kN Travel force movable platen closing 102 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max daylight 1650 mm …Price on request
Germany
Year: 1997
Condition Used Clamping force 500 ton Mould platen size (HxV) 1270 x 1200 mm Distance between tie bars 900x 800 mm Screw diameter 70 mm Injection pressure 2389 bar Injection volume 1097 cm3 Injection weight 998 g Injection material: pc, pa, pch 2 x air valve 4x hot runners multipicator Robot Krauss Maffei type- W 322 X-800 mm, Y-1600 mm, Z- 2500 mm, year:1997Price on request
Slovakia
Year: 1997
Clamping force: 500 ton Mould platen size (HxV): 1270 x 1200 mm Distance between tie bars: 900x 800 mm Screw diameter: 70 mm Injection pressure: 2389 bar Injection volume: 1097 cm3 Injection weight: 998 g Injection material: pc, pa, pch 2 x air valve 4x hot runners multipicator Robot Krauss Maffei type- W 322 X-800 mm, Y-1600 mm, Z- 2500 mm, year:1997Price on request
Slovakia
Year: 1998
Year: 1998 Control unit: MC3F Injection Unit: .../2700 Screw diameter: 80 mm Injection pressure: 1829 bar Injection volume: 1433 ccm Shot capacity: 1304 g Clamping Unit: KM 500/... Clamping force: 500 t Platen size: 1270 x 1200 mm Distance between tie bars: 900 x 800 mm Mould height: 480 mm Opening storke: 1170 mm Max.Daylight: 1650 mm Ejector stroke: 250 mm Drive power of the hydraulic pump: 89 kW Cylinder heating power: 36 kW Machine dimensions(m) LxWxH: 9,1 x 2,7 …Price on request
Poland
Year: 2001
Plastics Processing Serial number 504171 Clamping force 500 Ton Opening stroke mm: 1260 Distance between tie bars mm: 900 x 800 Installation height min/max mm: 90 Mould fixing platen size 1270 x 1200 Screw size mm: 80 Injection shot weight in Polysterol gr: 1304 Injection volume cm³: 1433 Injection pressure increased bar: 1829 Rated voltage 400 V, 50 Hz Rated current 80 A Max. fuze rating 80 A Control voltage 24 VDC Largest MTR FLA 34 A Short circuit current …Price on request
Romania
Year: 2000
MC 4 control Clamping unit: Clamping force 5000 kN Mold opening force, max. 280 kN Driving forces movable plate opening 124 kN Mold plate size (hxv) 1270 x 1200 mm Distance between columns (hxv) 900 x 800 mm Mold opening stroke 1170 mm Mold height min. 480 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit Screw diameter 70 mm Ls / D ratio 23 Injection pressure 2389 bar Injection volume 1097 ccm Injection weight 998 …Price on request
Poland
Year: 2002
In good running order with robot interface and nitrogen assisted injection.Price on request
United Kingdom
Year: 2006
locking unit: Closing force 5000 kN Mold opening force, max. 280 kN Driving force opening movable plate 137 kN Driving force for closing the moving plate 136 kN Clamping plate (h x v) 1270 x 1200 mm Clear width (h x v) 900 x 800 mm Tool opening path 1170 mm Mold installation height min. 480 mm Opening width: 1650 mm Ejector stroke 250 mm Ejector force forwards/backwards 95/48 kN injection unit: Screw diameter 90 mm Ls/D ratio 20 Injection …Price on request
Germany
Year: 2004
locking unit: Closing force 5000 kN Mold opening force, max. 280 kN Driving force opening movable plate 137 kN Driving force for closing the moving plate 136 kN Clamping plate (h x v) 1270 x 1200 mm Clear width (h x v) 900 x 800 mm Tool opening path 1170 mm Mold installation height min. 480 mm Opening width: 1650 mm Ejector stroke 250 mm Ejector force forwards/backwards 95/48 kN injection unit: Screw diameter 90 mm Ls/D ratio 20 Injection …Price on request
Germany