Manufacturer | Krauss Maffei |
---|---|
Model | KM 80-380 CX |
Category | Injection moulding machines |
Clamping force | 80 T |
Screw diameter | 35 mm |
Tie bar spacing (H) | 420 mm |
Tie bar spacing (V) | 420 mm |
Shot volume | 154 cm³ |
Shot weight | 183 g |
Pressure on material | 2429 bar |
Platen length | 670 mm |
Platen width | 670 mm |
Robot interface | |
Number of cores | 1 |
Number of heating zones | 5 |
Opening of the press | 600 mm |
Mould size | |
------------------- | |
Length x width x height | 4100.0 × 1500.0 × 2000.0 |
Weight | 3900 kg |
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
Year: 2005
Power in tons 80 T Screw diameter 40 mm Shot volume 201 cm³ Shot weight 183 g Pressure on material 1860 bar Platen lenght 670 mm Platen width 670 mmPrice on request
Poland
Year: 2005
Krauss Maffei CX 80-180 MC5 Locking Force: 80ton Volts: 400 / 50 Hz Year of manufacture 2005 Clamping force 80 ton Screw diameter 30 mm Shot weight (p/s) 77 gr Calculated injection volume 85 cm 3 Injection pressure 2025 bar Platen sizes 670 x 670 mm Distance between tie-bars 470 x 470 mm Min mould height 250 mm Mould opening stroke 500 mm Max daylight 750 mm Ejector stroke 150 mm Controls MC5 Total installed power 23 kw Length 4000 …Price on request
United Kingdom
Year: 2011
Machine is in very good condition 80 Ton Distance between columns : 420 mm x 420 mmPrice on request
Turkey
Year: 2008
clamping force: 800 kN distance between tie bars h: 420 mm distance between tie bars v: 420 mm size of mould plates h: 655 mm size of mould plates v: 670 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 150 mm ejector force: 125 kN centring device diameter of moving platen: 125 mm centring device diameter of fixed platen: 125 mm mould weight: 995 kg screw …Price on request
Germany
Year: 2006
Control system: MC5 1.0 Clamping force: 80 t Injection capacity: 96 cm³ Injection weight: 140 g Height of the plate for mounting the mold: 670 mm Width of the plate for mounting the mold: 670 mm Distance between the columns (horizontal): 420 mm Distance between the columns (vertical): 420 mm Screw diameter: 35 mm Maximum injection pressure: 2429 bar Machine length: 4100 mm Machine width: 1500 mm Machine height: 2000 mm Weight of the injection molding machine: 3800 kgPrice on request
Czech Republic
Year: 2021
Hydraulic injection molding machine Krauss Maffei KM 80-380 CX Year of production - 2021 AVAILABLE NOW Fully hydraulic locking system. The MC 6 control system is based on an industrial computer in real-time Ethernet technology, equipped with an integrated 21.5 ”control panel with a color touch screen. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 40 mm, with back-lock and open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD …Price on request
Poland
Year: 2005
Brand: Krauss Maffei Model: KM 80-380 CX Year 2005 Characteristic: 80 ton thermoplastic injector with 291 cm3 injection capacity. Control MC5 Spanish language injection unit Screw diameter: 40mm Ls/D ratio: 20 Injection pressure: 1800 bar Injection volume: 291cc Shot weight, PS: 183 grams closing unit Clamping force: 800kN Mold opening force, max: 55kN Displacement force mobile plate Opening: 31 kN Closing displacement force mobile plate: 20kN Plates size (hxv): 670 mm x 670 mm Distance between bars (hxv): 420mm x …Price on request
Spain
Year: 2012
Servo motor Machine is in very good condition 80 Ton Screw diameter : 35 mm Injection capacity : 154 cm3 Injection weight : 140 gr Injection rate : 96 cm3/sn Injection pressure(Max) : 2429 bar Screw rotation speed : 295 rpm Clamping stroke (Max ) : 500 mm Mold height ( Min-Max) : 250 mm Open day light : 750 mm Platen dimension : 670 mm x 670 mm Distance between columns : 420 mm x 420 mm Heater zone …Price on request
Turkey
Year: 2008
Controll panel: MC5 Clamping force: 80 tons Clamping plattes: 670 x 670 mm Daylight: 420 x 420 mm Max. oppening: 500 mm Screw diameter: 35 mm Injection pressure: 2429 bar Injection volume: 154 cm3 Shot weight: 140,1 g Working hours: 62.000 hPrice on request
Slovakia
Year: 2008
machine Specifications HP 80 - 380 CX - Year 2008 Control: The MC5 Injection Unit: ... / 380 CX Screw diameter: 35 mm Specific injection pressure: 2,429 bar Injection volume: 96 ccm Injection Weight: 140 g Clamping: 80 / ... Clamping force: 80 t Platen size: 670 x 670 mm Distance between columns: 420 x 420 mm Mould height: 250 ... mm Road Opening: 500 mm Max. Distance plates: 750 mm General information: Delivery time: Now Dimensions (m) LxWxH: 4.1 …Price on request
Poland
Year: 2012
Mold height min .: 250 mm Plate distance max .: 750 mm Dimensions: 4000 x 1300 x 2000 mmPrice on request
Germany
Year: 2006
KRAUSS MAFFEI KM 80-380 CX incl. WITTMANN W601 Operating hours: 24,000 h Screw: 40 mm Injection pressure: 1860 bar Displacement: 201 ccm Clamping force: 80 t Between tie bars: 420 x 420 mm Mold height min .: 250 mm Plate distance max .: 750 mm Dimensions: 4200 x 1700 x 2200 (2700 Robot) mm Weight: 3900 kg Connection: 15 motor + 11 heat. kW Description: WITTMANN W 601 model 2000 Picker Core pull 1 FACH PNEUMATIC VALVE 1 FACH Schittstelle …Price on request
Germany
Year: 2014
88 TON 16.5" X 16.5" TIE BAR SPACING 29.5" MAX DAYLIGHT 26.3" X 26.3" PLATEN SIZE 4.9 OZ SHOT 35MM SCREW DIAMETER 2200 LB MAX MOLD WEIGHT 19.5" MOLD OPEN STROKE 5.9" EJECTOR STROKE 460V, 3P, 60HZ MFG 2014 SN 61020072 All specifications are assumed to be correct but must be confirmed by the purchasing entity. Item Location - Liverpool, NYPrice on request
USA
Year: 2022
Krauss Maffei KM 80-380 CX hydraulic injection molding machine Year of production - 2022 Fully hydraulic closing system. The MC 6 control system is based on an industrial computer in real-time Ethernet technology, equipped with an integrated 21.5” control panel with a color touch screen. Plasticizing system complete plasticizing system for thermoplastics with a screw diameter of 40 mm, with a return lock and an open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD …Price on request
Poland
Year: 2006
80 ton thermoplastic injection machine with injection capacity 201 cm3. Version control: MC 5 Screen text: Spanish Operating hours: 32458 hours Hydraulic closing force 800 kN Mold opening force, max 55.3 kN Moving plate opening with displacement force: 31.1 kN Moving force of the moving plate Closing: 22 kN Size of the mold plates (hxv): 670 mm x 670 mm Distance between bars (hxv): 420 mm x 420 mm Mold opening stroke: 500 mm Min mold height: 250 mm Maximum …Price on request
Spain
Year: 2005
Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of construction: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Injection pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Euromap 67 Robot interface Control unit with air valve Hydraulic core pull x …Price on request
Poland