Mazak HYPER GEAR 510

Year: 2006

MAX. MACHINING SIZE............... 60.04" X 120.08" THICKNESS, MILD STEEL............. .98" X AXIS STROKE (EFFECTIVE STROKE).. 120.83" Y AXIS STROKE (EFFECTIVE STROKE).. 60.83" Z AXIS STROKE (EFFECTIVE STROKE).. 3.94" RAPID TRAVERSE RATE (X & Y)....... 4724 IPM RAPID TRAVERSE RATE (Z)........... 4724 IPM POSITIONING ACCURACY (X & Y)...... +/-0.0004"/20" POSITIONING ACCURACY (Z).......... +/-0.0004/3.94" APPROX. WEIGHT.................... 32,628 LBS. TOTAL HOURS (APPROX).............. 28,000 HOURS EQUIPPED WITH: MAZATROL PREVIEW CONTROL SIDE AIR BLOW 3-TRY RESTART FUNCTION AUTO POWER OFF WORK PIECE LIFTERS - BALL …

Year: 2006

Used laser cutting machine (MAZAK)

Year: 2005

4,000 Watts nominal rated laser output with Flying Optics. 4-Station automatic torch/tool changer and 10-station automatic nozzle changer with automatic nozzle inspection. Machine travels are X-axis of 120", Y-axis of 60", Z-axis of 3.94". Table will accept a max. workpiece weight of 2,050 Lbs; machine equipped with an automatic pallet changer. Max. material thickness of 0.984" (Mild Steel); 0.59" (Stainless Steel); and 0.47" (Aluminum). Machine is driven by non-contact Linear Drive motors, which attain positioning accuracy of 0.0004", repeatability of …

Year: 2005

Mazak Hyper Gear 510 - 4Kw Power : 4000W Année : 2005 Table : 3000 x 1500 +/- 20.000 Hours

Year: 2005

Mazak Hyper Gear 510 Table Size : 3000×1500 Year : 2005 Power : 4000W Time ON :31.000h Very good condition Available in July

Year: 2007

Type: Hyper Gear 510-2.5 Producer: 2007 Made in: MAZAK Characteristic: 2D laser cutting center Working hours: 12.000 Control system: Mazak 640 Preview Sheet format: 3000 x 1500 mm X axis: 3070 mm Y-axis: 1545 mm Z axis: 100 mm Drives X; Y; Z: linear Max. axis speed: 30 m / s Power: 4000 W Max. sheet thickness: 20 mm Max. Laser beam diameter: 22.5 mm Magazine for cutting heads: 4 positions; automatic exchange Magazine for nozzles: 10 positions automatic exchange …

Year: 2007

This MAZAK HyperGear 510 Laser Cutting machine was manufactured in the year 2007 in Japan. It is equipped with a MAZAK MAZATROL PRE VIEW control unit. The machine has a laser power of 2.5 kW. Machine weight: 14800 kg CNC: MAZAK MAZATROL PRE VIEW Laser power: 2,5 kW X-Axis Movement: 3070 mm Y-Axis Movement: 1545 mm Z-Axis Movement: 100 mm Outer length: 3000 mm Outer width: 1500 mm Max workpiece size: 3050 x 1525 x 22 mm Max load capacity: …

Year: 2006

MAXIMUM POWER 4000 WATTS MAXIMUM SHEET SIZE 60.04" X 120.08" X-AXIS TRAVEL 120.87" Y-AXIS TRAVEL 60.83" Z-AXIS TRAVEL 3.94" MAX CUTTING THICKNESS (MILD STEEL) 0.984" MAX CUTTING THICKNESS (STAINLESS) 0.59" MAX CUTTING THICKNESS (ALUMINUM) 0.47" MAXIMUM LOAD CAPACITY 2,050 LBS POSITIONING ACCURACY 0.0004" REPEATABILITY 0.0002" RAPID TRAVERSE 4,724 IPM APPROXIMATE FLOOR SPACE 441" X 135" EQUIPPED WITH: MAZATROL PREVIEW CNC CONTROL SIDE AIR BLOW ULTRA HIGH PRESSURE PIPING AUTO POWER OFF NOZZLE KIT ONE ADDITIONAL TORCH THREE TRY RESTART AUTOMATIC …

Year: 2010

Controller: MAZATROL PREVIEW X/Y/Z axis travel: 3,070/1,545/100mm Max. workpiece dim.: 3,050x1,525x16mm Max. workpiece weight: 580kgs Laser output: 1,800W Machine weight: 14,800kgs

Year: 2006

Resonator: 4000 watt Maximum workpiece size: 5' x 10' Maximum cutting thickness: 1" Travel (X/Y/Z Axis): 120"/60"/3.9" Positioning accuracy (X/Y Axis): 0.0004/20" Positioning accuracy (Z Axis): 0.0004/4" Rapid traverse rate (X & Y) 4724 IPM Floor space requirement: 441" x 135" Control specifications Model: Mazak PREVIEW control Installed in 2008 Approximate 12,000 hrs on resinator CPU: 64 bits Number of controlled axes: Simultaneous 3 Axis control (X-(X1 or X2), Y0 and Z-Axes) Minimum unit: 0.0001" Programming method: Intelligent method and …

Year: 2005

Laser continuous rated output 2.5 kW, 40 kW Max. workpiece size 1525 × 3050 mm (60.04" × 120.08") Travel ( X / Y / Z ) 3070 / 1545 / 90 mm (120.87" / 60.83" / 3.54") Positioning accuracy ( X-,Y-axis ) ±0.01 / 500 mm (±0.0004 / 19.7") Positioning accuracy ( Z-axis ) ±0.01 / 100 mm (±0.0004 / 3.94") Floor space requirement 10130 × 3370 mm (398.82" × 132.68")

Year: 2006

TYPE: HYBRID LINEAR MOTORS X-AXIS: TABLE MOTION Y-AXIS: LASER BEAM MOTION MAX. CUTTING SIZE: 60.04 X 120.08" WORK TABLE HEIGHT: 35.43" FROM FLOOR LEVEL AXIS STROKE(EFFECTIVE STROKE) X AXIS: 120.87" Y AXIS: 60.83" Z AXIS: 3.94" RAPID TRAVERSE RATE: X,Y: 4724 IPM Z: 4724 IPM AXIAL DRIVE SYSTEM: 5 AXES: LINER MOTOR DRIVE POSITIONING ACCURACY: X&Y:+ 0.0004"/20" Z:0.0004"/4" REPEATABILITY: X,Y,&Z: 0.0002" CUTTING HEAD: WITH THE LENS OF 7.5" FOCAL DISTANC; WITHSTAND PRESSURE: 145 PSL WORKSHEET SUPPORT METHOD BY KNIFE EDGES: …

Year: 2012

Mazak HyperGear 510 Manufacture year: 2012 08 Resonator power – 4,4kW Worked hour – 24500h Cutting pallet dimentions – 3050x1525 2PC cutting table system. Additional compensating U axis, for superb and and stable laser beam at any cutting table points. Max cutting material thikness: Mild steel - 25mm Stainless steel - 14mm Aliuminium - 10mm All machine Manuals Donaldson dust collector Daikin chiller Options: Chip conveyor 4 torch (7,5’’ ; 5,0’’ ; 8,75’’ ; tapping head M6, M8) Possible to …

Year: 2007

3000 x 1500 Double table 2500 kW machine is in very good condition

Year: 2011

Mazak CO2, mod. Hyper Gear sorgente CO2 2,5kw Manufacture year 2011, installed in 2012. 1500x3000 mm Linear motors Loding/unloading Tekmag. N. 2 head PFP (control axis with focal mob.) 5" and 7"1/2.- Working hours 14.000 . Very good condition, low work hours.