Mikron VCE 1000 pro

Year: 2001

IKZ 20 bar electric Handwheel Renishaw Measuring Probe OMP 40 Renishaw Laser Toot measuring Chip Conveyor Spray pistol Air Pistol Cooling water blast pipe swichable on Air external Spindle cooling net work access Automatic Central Lube System

Year: 2002

Technical details x-way 1020 mm y-way 560 mm z-way 600 mm Control TNC 410 HEIDENHAIN Table surface 1000 x 560 mm Table load 1,350 kg Speed 8,000 1 / min Rapid traverse 24/24/20 m / min Spindle motor 22 / 18.5 kW Recording ISO SK 40 Tool change device 24 Pos. Total power 42 kW Weight 6.5 t

Year: 2001

Mikron VCE 1000 Pro Machining center - vertical control: Heidenhain TNC 410 Description: X-Way: 1020 mm Y-Way: 560 mm Z-Way: 600 mm Clamping surface of desk: 1000 x 560 mm Max. table load: 1,3 t Amount of tools in maganzine: 24 Spindle power: 12 kW Spindles peed: 10 – 6000 rpm Spindle tool holder: ISO 40 Power requirement: 30 kVA Equipment: Spindle revision in 2016 Inner coolant system 20 bar Desk touch probe system TS 27 Renishaw measuring system Chip …

Year: 2011

vertical machining center, direct measuring system (rulers), internal coolant supply 18bar, controlled chiller for spindle, el. handwheel, 3D touchprobe OMP 40 RENISHAW, 2 processor control, no chipconveyor, approx. 61.500h "machine on", approx. 10.000h "spindle run" x-travel 1020 mm y-travel 560 mm z-travel 600 mm control iTNC 530 HEIDENHAIN table surface area 1000 x 560 mm table load 1.350 kg turning speeds 16.000 1/min rapid traverse 36/36/24 m/min spindle drive 15 kW taper ISO SK 40 tool change unit 24 Pos. …

Year: 2007

Machine parameters: Travels in X, Y, Z: 1020 x 560 x 600 mm Max. table load: 1350 kg Max. Spindle speed: 16.000 1 / min. Number of ATC: 24 Control: Heidenhain TNC 530 Machine weight: 6500 kg Description: The machine is in good technical condition, after agreement the possibility to test. In the summer of 2013 installed new linear guides, ball screws - made​​, documented and reported by the manufacturer - then the machine is not used, ISO 40

Year: 2006

Vertical machining center MIKRON VCE 1000 PRO, 2006, made in Switzerland, CNC Heidenhain TNC 530, 1020 x stroke 560 x 600 mm, table 1000 x 560 mm table load 1,350 kg, 10,000 rpm spindle, turret tool shop 24, training tool measurement system Heidenhain TS 27, measuring training taster Renishaw MP handwheel 12, struzhkovybrasyvatel. The machine is in good technical condition. HOURS spindle just 7,393 hours. ZIP komplektnyy.24 piece mandrels.

Year: 2004

Machine parameters: Travels in X, Y, Z: 1020x560x600 mm Clamping surface: 1000x560 mm Description: The machine is in good technical condition, after agreement the possibility to test. Heidenhain TNC 530, table load 1350 kg, spindle coolant with coolant 10000 rev / min, SK 40 tool magazine 24pcs, direct Wegmessystem, probes Heidenhain TS 27, Werkzeugmessystem Renishaw MP 12, wheel chip conveyor Spindles - 5800 hours.

Year: 2008

CNC:iTNC Heidenhain 530 Table:1400x620 mm X-travel:1400 mm Y-travel:650 mm Z-travel:675 mm Spindle speed:10,000 rpm main motor:18 kW Rapid feeds:24/24/20 m/min Max weight on table:1700 Kg ATC:24-station Coolant through spindle:Yes Taper:ISO 40 Dimensions of the machine:3250x3420x2790 (H) mm Weight of the machine:8700 Kg Additional information: Swarf conveyor, Renishaw TS27 contact tool setting probe, IKZ coolant unit Total working hours:700

Year: 2003

handwheel HOURS spindle only 6,710 hours. The machine is in operation and available in December 2013

Year: 2013

Heidenhain control unit Chip conveyor Machine is in very good condition