Mori Seiki NHX4000

Year: 2012

Tool taper SK 40 Spindle motor 11/15 kW Tool magazine places 40 Number of pallets 2 Pallet size 400 x 400 mm Table load 0,4 t Rapid traverses x / y / z 60 m / min Table - indexing 360 x 1 °

Year: 2011

Specifications Pallets 15.76" x 15.76" Travels 22" x 22" x 26" Tools 40 Control MSX 853IV Full 4th axis rotary table In-machine measuring system (Renishaw) Through –spindle coolant system I/F Custom macro common variable, 600 total Mayfran chip conveyer Chip Blaster MS-Q75 through spindle coolant system Rigid Tapping 20 HP

Year: 2012

730BM CNC Control MAPPS IV Info Full 4th Axis Rotary Table 60 ATC Direct Scale Feedback for X, Y, & Z-Axes Coolant Thru Spindle Prepped for High Pressure Coolant Thru Spindle Chip Conveyor - Rear w/Drum Filter & Cyclone High Output 40 HP Motor Renishaw OMP 60 Spindle Mounted Probe Tool Presetter Probing 300 Coordiante Systems 600 Meters of Memory Extended Macro Variable Oil Cooler Tool Life Management Flood Coolant Rigid Tapping Helical Interpolation Wired for 220V Opeation

Year: 2012

Horizontal Machining Centre with Pallet changer Manufacturer Mori Seiki Model NHX4000 Year of manufacture 2012 Control Mitsubishi M730BM Number of pallets: 2 Pallet size: 400 x 400 mm Pallet load: max. 400 kg Pallet change time: 8 sec. 4th Axis NC-Table indexing: 360° / 0.001 degrees Traverses: X 560 mm Y 560 mm Z 660 mm Distance spindle center-pallet: 80-640 mm Distance spindle head-pallet center: 70-730 mm Workpiece diameter: max. 630 mm Workpiece height: max. 900 mm Feeds: X/Y/Z 1-60000 …

Year: 2011

(1) Used Mori Seiki Model NHX 4000 CNC Horizontal Machining Center, New 2011 Specifications: Pallet Size / Number of Pallets: 15.7" x 15.7" / 2 pallets Table Indexing: .001 Degree Rotary Table Load Capacity: 880 lbs. Pallet Index Time: 1.49 seconds X-Axis Travel: 22" Y-Axis Travel: 22" Z-Axis Travel: 26" Spindle Nose: CAT # 40 Spindle Speed: 12,000 RPM Spindle Speed Ranges: 1 Range Spindle Motor: 40 HP Maximum Part Size (D x H): 24.8" x 35.4" Tool Magazine Capacity: …

Year: 2011

- Direct path measuring the standard - Approx. 40% less power consumption compared conventional models - 14% more stability achieved by the spindle, large diameter of the spindle bearings main drive Indexing Table m. Palettenw. tool magazine Full protection cabin Use coolant Water based Tool: BT40 Double arm: MAS (BT40) Tightening bolts: special design (coolant through the center, BT40) Tool magazine with 40 stations (BT40, pull studs: Special Version) I / F for high pressure coolant system 70 (by at …

Year:

- 4 Axis TABLE - Dimensions of the table: 400 x 400 mm - Weight allowed on the table: 400 kg - Maximum rotating diameter to be machined: 630 mm PIN - Spindle speed: 12,000 rpm - Spindle taper: BT 40 AXES - B axis: 360,000 positions - Axis travel: X=560 - Y=560 - Z=660 mm - Rapid advance: X - Y - Z = 60,000 mm/min TOOL STORE - Type of tool holder: BT 40 - Tool changer: 60 …

Year: 2012

- Show-Room-Machine / Demonstration-Machine - TOP - Condition - Set-Up in 2013 - 2-pos pallet-changer - (pictures partly similar) Work Height Max. 1.050 mm Indexing-Time 90° 1,3 sec Distance Spindle Center To Table 80 - 640 mm Rapid Traverse ( X / Y / Z ) 60 m/min Size Of Pallet 400 x 400 mm Max. Workpiece Weight 400 kg Max. Tool Length 450 mm Number Of Toolpositions 40 pos. Feeds: Max. Workpiece Height 900 mm Max. Workpiecediameter 630 mm …

Year: 2012

Almost new CNC horizontal center MORI SEIKI NHX4000, was in operation less than 2 years. Almost new machine for less than 50% of the original price! 4 machines NHX4000 type at the same condition. In case of purchasing more than one center, additional discount could be provided. One center is sold, 3 centers remained.

Year: 2012

Almost new CNC horizontal center MORI SEIKI NHX4000, was in operation less than 2 years. IMC closes its cnc department and this is an opportunity to purchase almost new machine for 50% of the original price. We have 4 machines NHX4000 type at the same condition. In case of purchasing more than one center, additional discount could be provided.

Year: 2012

2 Pallet Changer System Full 4th Axis Rotary Table Renishaw Spindle Probe ChipBlaster LV-40 HP Coolant System Coolant Through the Spindle Tool Life Management System Flood Coolant Chip Conveyor Rigid Tapping Helical Interpolation Part Program Storage Upgrade Spindle Oil Chiller Unit Tombstones All Available Manuals Run Hours of 2,715 Specifications Manufacturer Mori Seiki Model NHX4000 Year 2012 Condition Used Stock Number 117001 Quantity 1 Control Mitsubishi M730BM

Year: 2014

The DMG MORI SEIKI NHX4000 horizontal machining center , built in 2014 in Germany, is the perfect combination of functionality, productivity and precision. The technologically innovative machine, thanks to its wide processing capabilities, can be adapted to complex applications in many industries, such as the automotive industry or mechanical engineering. The one-piece bed with a sliding column additionally ensures the highest stiffness and stability during the milling process. - feeds in the X/Y/Z axis: 560/560/660 mm - accelerated feeds in …