Mori Seiki NMV 3000 DCG

Year: 2012

Spindle hours 1085 Rapid traverse x / y / z 50/50/40 m / min Feed rate 60 0000 mm / min Baxter + 160 ° / -180 ° C-axis 360 ° Workpiece dimensions max. 350 x 300 mm Workpiece weight 100KG Tool diameter 90 mm Tool diameter with 2 free spaces 125 mm Tool weight max 8kg Tool length - max 300m

Year: 2012

X : 500 mm Y : 350 mm Z : 510 mm W : +180’ -/+160’ C 360’ Control unit : Fanuc F31iA5 Spindle Speed : 12.000 rpm Spindle taper : BT40 120 pot 3D probe M&H Resinhaw NC4 Machine is in very good condition

Year: 2008

Make: Mori Seiki Type: NMV 5000 DCG Year of manufacture: : 2008 Technical specifications x-travel 730 mm y-travel 510 mm z-travel 510 mm Control MSX-711 III Rapid traverse speed 50/50/40 m/min Feed speed 6000 mm/min | Table clamping surface Ø 500 mm Table rotatable 360,000 x 0.001° Table swivels +/- -180/+160 ° Table load 0.3 t Speed range 12000 rpm Drive power - milling spindle 18.5 kW Number of tools in the magazine 91 pieces Tool holder HSK -A63 | …

Year: 2010

x-travel 500 mm y-travel 350 mm z-travel 510 mm Control Mori Seiki MSX 711 (Fanuc 31i) MAPPS IV Spindle power 22/11 kW Spindle speed 20000 rpm Feeds x/y/z 50 / 50 / 40 m/min Rapid traverse x/y/z 50 / 50 / 40 m/min c-axis 360,000 x 0.001° b-axis +160,000/ -180,000x0.001° B-axis speed 150 rpm Table diameter 350 mm Workpiece height - max. 300 mm Workpiece diameter - max. 350 mm Workpiece weight 100 kg Tool magazine: 61 HSK-A 63 Total …

Year: 2010

MSX-711 MAPPS IV Control Table: (2) 19.7” x 19.7” Travels: X: 28.7” Y: 20.1” Z: 20.1” B: +160 ° - -180° C: 360,000° Table to spindle: 5.1” – 25.2” Table load Max: 660 Lbs. Table Rotation Speed: 120 RPM Spindle Speed: 12,000 RPM Spindle Taper: CAT 40 Spindle Motor: 25HP Tool Magazine: 60 ATC Tool Change Time: 1.8 Seconds High Pressure Coolant Through Spindle Renishaw OMI-2 Renishaw Spindle Probe Renishaw Tool Touch Probe Rear Discharge Scraper Type Chip Conveyor MistBuster

Year: 2012

x-travel 500 mm y-travel 350 mm z-travel 510 mm turning speeds 42.000 1/min tool taper HSK E40 control FANUC F 31i A5 tool change unit 91 pos. table surface area D 350 mm table load 100 kg rapid travel x/y/z 50 / 50 / 40 m/min total power requirement 45 kVA weight of the machine ca. 10,5 t

Year: 2011

X Axis Travel 19.7" Y Axis Travel 13.8" Z Axis Travel 20.1" Spindle Speed 12,000 RPM Spindle Taper BT-40 Rapid Traverse Rate X,Y 1968.5 Z 1574.8 IPM Spindle Drive Motor 24.7/20 Hp

Year: 2014

This DMG MORI NMV 3000 DCG Vertical Machining Center was manufactured in the year 2014 in Switzerland. It has 5 axis and counts with 16667 production hours. It operates with a DMG MORI MAPPS IV control unit and can perform with a spindle speed up to 12000 rpm. Includes a chip conveyer and presents a good condition. Machine width: 2339 mm Machine depth: 3820 mm Machine height: 3250 mm Machine weight: 9400 kg CNC: DMG MORI MAPPS IV Number of …