Machine's specifications - Nakamura Super NTJ Used machines

Manufacturer	Nakamura
Model	Super NTJ
Category	Lathes - cnc lathes

Used Nakamura Super NTJ Cnc lathe Sold

Year: 2007

TRAVEL: X AXIS:................ 6.59" Y AXIS:................ 2.440" Z AXIS:................ 22.7" TURNING DIAMETER:.............. 7.48" TURNING LENGTH:................ 24.41" CHUCK DIAMETER:................ 8.000" SUB SPINDLE CHUCK DIAMETER..... 6" LEFT SPINDLE BAR CAPICITY:..... 2.5" RIGHT SPINDLE BAR CAPACITY:.... 2.0" SPINDLE SPEED:................. 5000 RPM MAIN MOTOR (HP):............... 20 / 15 HP SUB SPINDLE MOTOR:............. 15 / 10 HP MILLING MOTOR:................. 5 HP MILLING SPEED:................. 6000 RPM RIGHT SPINDLE NOSE:............ A2-5 LEFT SPINDLE NOSE:............. A2-6 UPPER TURRET NUMBER OF TOOLS:.. 24 LOWER TURRET NUMBER OF TOOLS:.. 24 …

Price on request

USA

Used Nakamura Super NTJ Cnc lathe Sold

Year: 2004

SPECIFICATIONS 18I-TA, (1) Used Nakamura-Tome Super Ntj 9 Axis Turning Center With Sub Spindle and Y-Axis New-2007 Travel: X Axis:................ 6.59" Y Axis:................ 2.440" Z Axis:................ 22.7" Turning Diameter:.............. 7.48" Turning Length:................ 24.41" Chuck Diameter:................ 8.000" Sub Spindle Chuck Diameter..... 6" Left Spindle Bar Capicity:..... 2.5" Right Spindle Bar Capacity:.... 2.0" Spindle Speed:................. 5000 Rpm Main Motor (Hp):............... 20 / 15 Hp Sub Spindle Motor:............. 15 / 10 Hp Milling Motor:................. 5 Hp Milling Speed:................. 6000 Rpm Right Spindle Nose:............ …

Price on request

USA

Used Nakamura Super NTJ 9 AXIS TURNING CENTER with FANUC 18i-TB CNC CONTROL Sold

Year: 2007

SPECIFICATIONS: 18i-TB, 8" CHUCK & 3J COLLET, 6" SUB SPINDLE, 9-AXIS (1) USED NAKAMURA-TOME SUPER NTJ 9 AXIS TURNING CENTER WITH SUB SPINDLE AND Y-AXIS NEW-2007 TRAVEL: X AXIS:................ 6.59" Y AXIS:................ 2.440" Z AXIS:................ 22.7" TURNING DIAMETER:.............. 7.48" TURNING LENGTH:................ 24.41" CHUCK DIAMETER:................ 8.000" SUB SPINDLE CHUCK DIAMETER..... 6" LEFT SPINDLE BAR CAPICITY:..... 2.5" RIGHT SPINDLE BAR CAPACITY:.... 2.0" SPINDLE SPEED:................. 5000 RPM MAIN MOTOR (HP):............... 20 / 15 HP SUB SPINDLE MOTOR:............. 15 / 10 HP MILLING MOTOR:................. …

Price on request

USA

Used NAKAMURA SUPER NTJ Cnc lathe Sold

Year: 2007

Price on request

France

Used NAKAMURA SUPER NTJ Cnc lathe Sold

Year: 2004

Price on request

France

NAKAMURA Super NTJ Cnc lathe Sold

Year: 2008

Price on request

Germany

Nakamura Super NTJ cnc lathe Sold

Year: 2003

Axis b: upper turret, +/- 91 °, rotation speed 180 degrees / sec, minimum increment for indexing 1 C axis: minimum increment 0.001 °, positioning 600 Rpm X-axis: X1 / X2 345 / 167.5 mm Rapid advancements (x / y / z): 16/16/40 m / min Working range: 190x620 mm CNC: Fanuc 18i-TB Maximum workpiece diameter: 190 mm Extras: chip conveyor, 6 tool holders motorized, fixed 5 toolholders, chucks, tool setting, high pressure, take part Dimensions: with conveyor) 5120x2470x2170 mm …

Price on request

Italy

NAKAMURA SUPER NTJ cnc lathe Sold

Year: 2004

fixed headstock machine spindle bore 63 mm 2 x C-axis B-axis Y-axis 2 x 11 live tools chip conveyor workpiece catching device 2 turrets

Price on request

Germany

NAKAMURA Super NTJ cnc lathe Sold

Year: 2003

Technical details Turning diameter - 190 mm Rotating length - 620 mm Control unit - Fanuc 18ITB Spindle mount - 6 and 5 ASA Rod passage - 66 and 52 mm Speed - 4500 and 5000 giri / min rpm Toolholders - 24 Spindle drive - 11/15 and 7.5 / 11 kW Eigang in the axes X, Y, Z - 16, 16, 40 mm Machine dimensions LxBxH - 5120 x 2470 x 2170 mm Machine weight approx. - 12.5 t …

Price on request

Germany

NAKAMURA SUPER NTJ cnc lathe Sold

Year: 2006

SuperNTJ Nakamura dating from 2006. 7000 Hours pin High pressure Bi turret Bi spindle 8 axes 24 positions Min diameter 8 mm Diametre max bar 65 FANUC 18-i TB Z 1240 3 meters

Price on request

France

NAKAMURA Super NTJ cnc lathe Sold

Year: 2007

Fanuc 18 iTB control NT Nurse 2 Software max. turning diameter 190 mm max. turning length 620 mm main spindle 15 kW, max. 4.500 rpm sub spindle 11 kW, max. 5.000 rpm 2x full C-axis Y-axis upper turret, +/- 45 mm B-axis +/- 91° 2x 12-station turret, all stations for driven tools 24 st. index, driven tools 3,7 kW, max. 6.000 rpm Toolsetter parts catcher Typ A, left side parts catcher Typ G, right side parts conveyor Interface for barfeeder …

Price on request

Germany

Nakamura SUPER NTJ cnc lathe Sold

Year: 2002

Control system: Fanuc Turn table diameter : 190 mm Turning lenght : 620 mm Travel Y-axis : 90 mm Counterspindle : true Milling head : true Accesories: Tool holders Heimatec, chuck Kitagawa

Price on request

Czech Republic

Nakamura Super NTJ cnc lathe Sold

Year: 2011

Manufacturer Nakamura Japan Type Super NTJ Year 2011 Max. turning diamter Ø 190 mm DBC Turning length 970 mm C-Axis 360.000 ° Spindle bore 65 mm Main Spindle speed 4500 Rpm ATC / revolver 12 Speed live tools 4500 Rpm Power live tools 15 kW Control Fanuc 18i TB Chip conveyor Yes Tool eye Yes B Axis -182 ° Sub Spindle speed 5000 Milling Spindle 6000 Length 3700 mm Width 2300 mm Height 2300 mm

Price on request

Netherlands

Used Nakamura Super NTJ Cnc lathe Sold

Year: 2004

Travel: X Axis:................ 6.59" Y Axis:................ 2.440" Z Axis:................ 22.7" Turning Diameter:.............. 7.48" Turning Length:................ 24.41" Chuck Diameter:................ 8.000" Sub Spindle Chuck Diameter..... 6" Left Spindle Bar Capicity:..... 2.5" Right Spindle Bar Capacity:.... 2.0" Spindle Speed:................. 5000 Rpm Main Motor (Hp):............... 20 / 15 Hp Sub Spindle Motor:............. 15 / 10 Hp Milling Motor:................. 5 Hp Milling Speed:................. 6000 Rpm Right Spindle Nose:............ a2-5 Left Spindle Nose:............. a2-6 Upper Turret Number of Tools:.. 24 Lower Turret Number of Tools:.. 24 …

Price on request

USA

Used 2007 Nakamura Super NTJ Turning Center Sold

Year: 2007

SWING OVER SLIDE...................................................... 7.48" MAX TURNING DIAMETER/LENGTH.......................... 7.48"/24.41" BAR CAPACITY.............................................................. 2.0" L/R CHUCK SIZE................................................................... 6" SPINDLE SPEEDS........................................................... 5,000 RPM L/R SPINDLE NOSE.............................................................. A2-5 SPINDLE BORE.............................................................. 2.05" L/R C AXIS............................................................................ .001° B AXIS(UPPER TURRET)............................................... +/- 91° (1° INDEXING) TOOL STATIONS........................................................... 24 UPPER, 24 LOWER,12 LIVE EACH TRAVELS (X1/X2)........................................................... 13.58"/6.59" (Z1,Z2)............................................................ 48.82"/26.97" (Y)................................................................... +/- 1.77" RAPID TRAVERSE (X,Z)................................................. 630/1575 IPM SPINDLE MOTORS(L/R)................................................. 20 HP/ 15 HP EQUIPPED WITH: TWIN TURRETS TWIN SPINDLES (B) AXIS UPPER TURRET (Y) AXIS 6' MAGAZINE STYLE LNS …

Price on request

USA

NAKAMURA SUPER NTJ cnc lathe Sold

Year: 2003

CAPACITY Ø tornibile 190 mm turning length 620 mm I ° CHUCK spindle nose 6 ASA capacity bar 66 mm Rotation speed 4500 rev / min motor power 11/15 kw c axis 0,001 degrees II CHUCK spindle nose 5-ASA capacity bar 52 mm Rotation speed 5000 rev / min. motor power 7.5 / 11 Kw I ° TOWER Tool stations 24 motorizable 12 stationary tools 12 II TOWER Tool stations 24 motorizable 12 stationary tools 12

Price on request

Italy

NAKAMURA SUPER NTJ cnc turning and milling center Sold

Year: ~ 2007

CNC counter spindle turning and milling center Initial start Oktuber. 2007 Manual Guide Intelligent handwheel Spindle motor 15/11 kW left Right spindle motor 11 / 7.5kW max. Spindle speed of 4,500 rev / min left max. Spindle speed of 5,000 rev / min left max. Turning diameter 190 mm max.Drehlaenge 620 mm Bar capacity 65 mm left Bar capacity 51 mm right Rapid X1 / X2 16 m / min Rapid Z1 / Z2 40 m / min 2x full …

Price on request

Germany

Used NAKAMURA SUPER NTJ Cnc lathe Sold

Year: 2006

passage in mm 66 control FANUC 18i 15‘000 h under power B-axis C-axis on main and sub-spindle Y-axis on main spindle high pressure pump coolant unit turret 1 for driven tools turret 2 for driven tools clamping cylinder (hollow and partly hollow) chip conveyor parts transporting belt parts catching device various driven and stationary tool holders collet chuck bar feeder

Price on request

Switzerland

NAKAMURA Super NTJ cnc lathe Sold

Year: 2004

control Fanuc 18 ITB y-axis +/- 45 mm b-axis +/- 91° deg numbers of turret head positions 2 x 12 + 24 bar material dia. 65/51 (l/r) mm power capacity 18,5/15 (l) 15/11 (r) kW Accessories chip (swarf) conveyor oil-mist-extractor bar loading magazin Profimat 65.8 Other information Operating hours: 18.069 Power-on-time: 38.490

Price on request

Germany

Nakamura-Tome CNC Lathe Super NTX (2004) For Sale Sold

Year: 2004

Nakamura-Tome CNC Lathe Model: Super NTX Year: 2004 Control: Fanuc 16i-TB Chuck size: 8" Max. turning diameter: 390 mm Max. turning length: 1100 mm Distance between spindle nose: Max. 1400 mm Min. 250 mm Bar capacity: 65 mm Slide travel: X1: 630 mm Z1: 1150 mm B2: 1150 mm X2: 255 mm X3: 255 mm Z2: 375 mm Z3: 375 mm Y: 160 (+/- 80 mm) Spindle speed (Left spindle and Right spindle): 4500 rpm Tool spindle speed: 8000 rpm …

Price on request

Taiwan

NAKAMURA SUPER NTJ cnc lathe Sold

Year: 2008

- Bar diameter: 65 mm - Maximum turning diameter: 190 mm - Spindle nose: A2-6 - Spindle power: 15 kW - Spindle speed: 4,500 rpm - C axis indexing: 0.001° COUNTER SPINDLE - Bar diameter: 51 mm - Spindle nose: A2-5 - Spindle power: 11 kW - Spindle speed: 5000 rpm - C axis indexing: 0.001° - Stroke: 760mm UPPER LEFT TURRET - Number of positions: 24 - Number of motorized positions: 24 - Axis travel: X=345 mm - Y=+/- …

Price on request

France

NAKAMURA Super NTJ CNC lathe 10-axis Sold

Year: 2004

Specifications: Working length 620 mm Max. working diameter 190 mm Swing over bed 190 mm Spindle speeds 50 - 4500 rpm Spindle bore 65 dia. mm Number of tools 2 x 24 pcs No. of rotating stations 2 x 12 pcs Spindle speeds rotating tools 6000 rpm X-axis 345 mm Z-axis 1240 mm x2 - travel 167,50 mm z2 - travel 685 mm Control FANUC 18 i - TB Running hours 7800 Amp 198/180 Y-axis horizontal movement + - 45 …

Price on request

Denmark

Used NAKAMURA SUPER NTJ. CNC TURNING CENTER, w/ 6' MAGAZINE STYLE LNS BAR FEED Sold

Year: 2007

Specifications: SWING OVER SLIDE...................................................... 7.48" BAR CAPACITY.............................................................. 2.0" L/R CHUCK SIZE................................................................... 6" C AXIS............................................................................ .001° B AXIS(UPPER TURRET)............................................... +/- 91° (1° INDEXING) TOOL STATIONS........................................................... 24 UPPER, 24 LOWER,12 LIVE EACH TRAVELS (X1/X2)........................................................... 13.58"/6.59" (Z1,Z2)............................................................ 48.82"/26.97" (Y)................................................................... +/- 1.77" RAPID TRAVERSE (X,Z)................................................. 630/1575 IPM SPINDLE MOTORS(L/R)................................................. 20 HP/ 15 HP EQUIPPED WITH: TWIN TURRETS TWIN SPINDLES (B) AXIS UPPER TURRET (Y) AXIS 6' MAGAZINE STYLE LNS BAR FEED TOOL SETTER 1,000 PSI HIGH PRESSURE THROUGH TOOL COOLANT (BOTH SPINDLES) 10 OD …

Price on request

USA

Nakamura Super NTJ Cnc lathe Sold

Year: 2003

Axis b: upper turret, +/- 91 ° rotation speed 180 degrees / sec minimum increment for indexing 1 C-axis: minimum increment 0.001 °, positioning 600 rpm X axis X1 / X2 345 / 167.5 mm Rapid traverse (x / y / z): 16/16/40 m / min Scope of Work: 190x620 mm CNC: Fanuc 18i-TB Maximum diameter of workpiece: 190 mm Extras: chip conveyor, motorized 6 tool holders, 5 fixed tool holder, collet chuck holders, tool setting, high blood pressure, take …

Price on request

Italy

Nakamura SUPER NTJ cnc lathe Sold

Year: 2002

Control system Fanuc : Turn table diameter : 190 mm Turning lenght : 620 mm Sloping bed : Y axis : true Travel Y-axis : 90 mm Counterspindle : true Spindle bore : mm Milling head : true Accesories: Tool holders Heimatec, chuck Kitagawa Fanuc 18i - T Spindle and counterspindle speed – S 5000 Tools spindle – S 5000

Price on request

Czech Republic

NAKAMURA SUPER NTJ100 Sold

Year: 2006

Hours 14572h Fanuc 18iTB Course X 345mm Course Y 90 mm Course Z 1240 mm Fast Speed X axis 36 m/min Z axis 36 m/min Machine RPM 5000 bridge 11 Head Type Linear Guides general Tool Turret Yes Quantity of Tools 24 spindle RPM 4500 Engine Power 15 kw Spindle Type Direct Engine spindle electrospindle Yes Spindle Cooler Type Antifreeze Interface Type A2-6

Price on request

Portugal

NAKAMURA Super NTJ cnc lathe Sold

Year: 2006

This NAKAMURA Super NTJ Lathe was manufactured in the year 2006 in Japan. It is equipped with a Fanuc 18 ITB control unit. The machine disposes of a 2 turrets with 6000 rpm drive. The first one has 12 stations and the second has B axis. Contact us anytime for further questions. CNC: Fanuc 18 ITB Number of axis: 9 Number of turrets: 2 Number of tool slots: 12 Turret 2 with b axis Turret with 12 stations Turret all …

Price on request

Germany

Nakamura Super NTJ

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?

Turning length	620 mm
Turning Ø	190 mm
Ø above the bed	190 mm
Ø above transversing slide	65 mm
Length between centers	600 mm
Type of CNC	Fanuc 16i-TB
X-axis	345 mm
Z-axis	1240 mm
Max workpiece weight	kg
Spindle taper	A2-5
Spindle bore	65 mm
Number of turrets	2
Number of tools on turret	24
Number of rotating tools	12
Turning speed	5000 rpm
Spindle motor power	15 kW
Tailstock	no
Bar feeder	no
-------------------
Length x width x height	5120.0 × 2470.0 × 2170.0
Weight	12500 kg