Okuma LC-20

Year:

CNC lathe: OKUMA Mod: LC-20 Chuck diameter: mm. 250 Complete temperate jaws and reversible 7 series turning jaws Travel: mm. 570 Turret for 8 tools With 12 tool holders for internal Chip conveyor Without tailstock CNC OSP 3000

Year:

CNC single-spindle lathe: OKUMA Mod: LC-20 5 axis Axis C for live tools One turret for 8 stations internal-external and live tools With tailstock Distance between center: about mm. 700 Chuck with 3 jaws diameter: mm. 210 Spindle hole diameter: mm. 40 Automatic bar loader with magazine PF-V3 S/N 97970554 Chip conveyor OVERALL DIMENSIONS: m. 3 x 2 Loader: m. 3 CNC OSP 5000

Year:

CNC single-spindle lathe: OKUMA Mod: LC-20 4 axis Two turret for 8+8 stations internal-external and live tools With tailstock Distance between center: about mm. 700 Chuck with 3 jaws diameter: mm. 210 Chip conveyor CNC OSP 5000

Year: 1987

Specifications Swing Over Bed: .................................................... 15.75" Max. Turning Diameter – Chuck Work:.................... 10.24" -Center Work....................... 7.87" Max. Work Length Turned:..................................... 39.37" Spindle Diameter:.................................................... 3.94" Through-Spindle Hole:............................................ 2.20" Taper Hole: ............................................................ No. 6 MT Spindle Speeds: ...................................................... 78 – 4200 RPM Feed Rate: .............................................................. 0.0001" – 39.37" / Min. Travel – X-Axis: ..................................................... 6.30 - Z-Axis: ................................................................ 39.37" Rapid Traverse Rate – X-Axis:................................ 236" / Min. - Z-Axis:................................................................ 472" / Min. Turning Tool Shank Diameter – O.D........................ 0.98" - I.D....................................................................... 1.57" …

Year: 1991

SPECIFICATIONS: Swing over bed 15.75" Max turning dia. x max work length 11.8" x 29.5" Carriage (z-axis) upper/lower turret 30.3" / 23.6" Cross slide travel (x-axis) upper/lower turret 6.9" / 4.5" Cutting feed rates 0.0004 to 39.4 IPR Rapid traverse rate 197 IPM Number of tool stations (upper turret) 8 stations Number of tool stations (lower turret) 8 stations Tail Stock: Diameter of quill 3.5" Tailstock quill travel 5.9" Spindle motor 30 hp Equipped with: Okuma OSP 5000L-G CNC control …

Year: 1986

Specifications Swing Over Bed............15.75" Max Work Length Turned....39.37" Rapid Travers X,Z.........236/472 ipm Through Spindle Hole......2.20" Feed Rate.................0.0001"- 39.37"/min X-axis Travel.............6.30" Z-axis Travel.............39.37" Tailstock Sleeve Travel...3.94" Tailstock Sleeve Taper....No.6 MT Spindle Motor.............20/15 hp 30 min/cont Electric..................3/60/480v Equipped With: Okuma OSP5000L-G CNC Controller Tailstock with Programmable Quill 10" 3 Jaw Chuck 12 Station Turret Chip Conveyor All Manuals Multi-Tap Transformer( easy change to other Voltage)

Year:

GENERAL SPECIFICATIONS Swing Over Bed: 15.74" Maximum Turning Diameter: 11.81" Center Distance: 39.37" Spindle Bore: 2.04" Spindle Speed: 3500 RPM Longitudinal Travel, Upper Turret: 39.3" Longitudinal Travel, Lower Turret: 33.58" Cross Slide Travel, Upper Turret: 6.49" Cross Slide Travel, Lower Turret: 4.52" Rapid Traverse, X-Axis: 196 IPM Rapid Traverse, Z-Axis: 393 IPM Number Of Tool Stations, Upper & Lower Turret: 8 Tailstock Quill Stroke: 5.9" EQUIPPED WITH Okuma OSP5000L-G Control DEL 16C Collet Chuck Tailstock Chip Conveyor Manuals