Machine's specifications - Pinacho Taurus 260 Used machines

Manufacturer	Pinacho
Model	Taurus 260
Category	Lathes - cnc lathes

Used PINACHO TAURUS26 cnc lathe Sold

Year:

Diameter of the plate: 530 mm Maximum turning lenght: 1625ep mm Spindle bore diameter: 80 mm Spindle nose: 8 ASA Main Spindle speed: 0-625-2500 RPM Feeds range: 0-7000 mm/min Turret type: 4 pos Main motor: 10 CV CNC control: FAGOR 8050T

Price on request

Spain

Pinacho Taurus cnc lathe Sold

Year: 2004

This used 1.5m control lathe has the following technical characteristics: CNC control: FAGOR 8055 TC Ø Max. Over bed: 530 mm Ø Max. On longitudinal carriage: 475 mm Ø Max. On cross slide: 315 mm Dot Height: 260mm Distance between points: 1500 mm Bed width: 350 mm Ø Main spindle hole: 72mm Head revolutions: 0-2500 r.p.m. Main Motor Power: 11 Kw Tailstock shank diameter: 72 mm Shank travel to tailstock: 180 mm Morse taper of the tailstock: Morse 5 Barufaldi …

Price on request

Spain

Used PINACHO TAURUS 260 Cnc lathe Sold

Year: 2005

Price on request

France

Used PINACHO Taurus 260 Cnc lathe Sold

Year:

Price on request

France

CNC lathe Pinacho Taurus 260 Sold

Year: 2001

STOCK NO.: 2872 CNC-LATHE MANUFACTURE: PINACHO, TYPE: TAURUS 260 CNC SERIAL NO.: , BUILD: 2001 Specifications: CNC controlled. Control system FAGOR 8055 Max. Turning dia o/slide 530 mm dia. Spindle bore 80 mm dia. Spindle speed Range 20-2500 rpm Controlled in 2 axis Max. Turning diameter 520 mm dia. Total motor power 11 kW Various toolposts. Tailstock

Price on request

Denmark

Used PINACHO TAURUS 260 Turret lathe Sold

Year: 2002

Swing over bed 530 mm • Chuck diametre 255 mm • Bar capacity ∅80 mm

Price on request

Spain

Pinachio Taurus 260 cnc Teach Lathe Sold

Year: 2008

Description: 3 Jaw Chuck

Price on request

United Kingdom

Used Pinacho Taurus 260 Cnc lathe Sold

Year: 2001

CNC Fagor 8055TC. Turning length: 2000 mm. Max. turning diameter over slide: 315 mm. Max. turning diameter over bed: 530 mm. Spindle passage: 80 mm. Max spindle speed: 2500 rpm Rapid traverse 10 m / min. Cone: MK fifth Cooling. SMW 3 backs chuck pneumatic. Supporting layer.

Price on request

Sweden

Pinacho Taurus 260 cnc lathe Sold

Year: 2004

Manufacturer: Pinacho. Model: Taurus 260. Year: 2004. Swing diameter: Ø 530 mm. Maximum diameter over cross slide: Ø 315 mm. Turning length: 2000 mm. Control: FAGOR 8055th Centre height: 260 mm. Spider Review: Ø 80 mm. Female taper: DIN 55027- nº8. 2-speed spindle gear 0-625 rpm and 625-2500 rpm.

Price on request

Sweden

Used Pinacho Taurus 260 cnc lathe Sold

Year: 2007

Control: Oi-TC The height of the wheels 260 mm Turning length 1500 mm Swing over bed 530 mm Swing over sledge 315 mm Width of the bed 350 mm Spindle bore 80 mm Spindle taper DIN 55027 No. 8 Spindle speed gear stage 1 0- 650 UMP, UMP 2nd gear 0-2500 Rapid traverse 15 m Stroke tailstock 150 mm Cone tailstock MK 5 Main engine power of 11 KW Only 1000 hours of operation

Price on request

Germany

PINACHO TAURUS 260 cnc lathe Sold

Year: 2001

greates pass round over bed 530 mm turning diameter over slide rest 315 mm turning length 1500 mm spindle turning speed range 1 - 650 / 650 - 2500 U/min spindle bore 80 mm spindle motor 11 kW transmission ratio I - rapid traverse 15 m/min machine weight 4,0 t total power requirement 18 kW floor space required - machine 4,0 x 2,0 x 2,0 m CNC FAGOR 8 - tool turret

Price on request

Germany

Pinacho Taurus 260 cnc lathe Sold

Year: 2001

Turning length : 1500 mm Turning diameter : 520 mm Fanuc control Machine is in good condition

Price on request

Turkey

Pinacho Taurus 260 cnc lathe Sold

Year: 2002

Turning length : 1600 mm Turning diameter : 500 mm Fanuc control unit 3000 rpm

Price on request

Turkey

Pinacho Taurus 260 cnc lathe Sold

Year: 2003

Turning diameter: 520 mm Turning on the cross slide: 315 mm Center distance: 1500 mm Spindle diameter: 80 mm Spindle speed: 0-2500 rpm Turret: 8 positions Engine: 17 kW Year of manufacture: 2003 Length of the machine: 3970 mm Width of the machine: 1720 mm Height of the machine: 1820 mm

Price on request

Portugal

Pinacho Taurus 260 cnc lathe Sold

Year:

CNC control: Fanuc 21i-T Diameter max on bed: 530 mm Max diameter on longitudinal carriage: 475 mm Max diameter on transversal carriage: 315 mm Height of centers: 260 mm Distance between centers: 1500 mm Bed width: 350 mm Spindle bore: 80 mm Head speed: 0-2500 r.p.m. Power Main motor: 11 Kw Diameter of the tailstock: 72 mm Travel of the cane to the counterpoint: 180 mm Morse taper of the counterpoint: Morse 5 Automatic change turret: DUPLOMATIC BSV-N Turret tools …

Price on request

Spain

Pinacho TAURUS 260 cnc lathe Sold

Year: 2002

Brand Pinacho Model Taurus 260 Parallel type Control FANUC 21i-T Distance between points mm. 2000 Main hole diameter mm. 80 Diameter admitted on carriage mm. 475 Diameter max. Turning (mm) 520 Diameter admitted on bench mm. 530 Banking width mm. 350 Automatic turret yes Motorized turret no Main motor power kw. 17 RPM 2500 head Year 2002 External measurements mm. 4980x1720x1820 Weight 3300 kg

Price on request

Spain

Pinacho Taurus 260 cnc lathe - REDUCED Sold

Year: 2000

Year 2000 Fagor 8055 CNC control Distance between centers: 1500 mm Spindle bore: ø80 mm Center height: 260 mm Hydraulic chuck 300 mm Hydraulic turret 8 pcs., 2 pcs. rests

Price on request

Denmark

Pinacho Taurus 260 cnc lathe Sold

Year:

CNC control: Fagor 8055, Max. diameter on bed: 530 mm, Max. diameter on longitudinal carriage: 475 mm, Max. diameter on transverse carriage: 315 mm, Center height: 260 mm, Distance between centers: 3000 mm, Bed width: 350 mm, Hole diameter of the main spindle: 95 mm, Main motor power: 11 kW, Diameter of the tailstock rod: 72 mm, Rod travel to tailstock: 180 mm, Morse tailstock cone: 5, Automatic gear turret: Barufaldi ts 160 / 8-0, 300mm diameter SMW autoblok pneumatic …

Price on request

Spain

Pinacho Taurus 260 cnc lathe Sold

Year: 2002

For sale CNC lathe Pinacho Taurus 260 of 1500 between points Equipped: 8 position duplomatic turret Ø250 automatic hydraulic plate tempered and rectified. Fagor control 8055

Price on request

Spain

Pinacho TAURUS26 Cnc lathe Sold

Year:

Equipped with Fagor 8050T control. Capacity - Distance between centers: 1,650 mm. - Center height: 260 mm. - Diameter above the bed: 530 mm. - Longitudinal Diameter above transversing slide: 475 mm. - Diameter over cross slide: 315 mm. - Width of bed: 350 mm. Spindle - Spindle hole: 80 mm. - Spindle nose: Nº8 - Number of speeds: 2 ranges - Ranges of speeds: 0-625-2500 rpm Advances and steps - Fast movement Z-X: 10 m / min. - Working …

Price on request

Spain

Pinacho Taurus 260 cnc lathe Sold

Year:

CNC control: Fagor 8055 Diameter max on bed: 530 mm Max diameter on longitudinal carriage: 475 mm Max diameter on transversal carriage: 315 mm Height of centers: 260 mm Distance between centers: 2000 mm Bed width: 350 mm Hole diameter of main spindle: 95 mm Main motor power: 11 Kw Diameter of the tailstock: 72 mm Travel of the cane to the tailstock: 180 mm Morse taper of the tailstock: 5 Automatic change turret: BARUFALDI TS 160 / 8-0 Hydraulic …

Price on request

Spain

Pinacho Taurus 260 cnc lathe Sold

Year:

This lathe mark Pinacho of meter and a half between points has the following technical characteristics: CNC control: FANUC 21i-T Ø Max. On bench: 530 mm Ø Max. On longitudinal carriage: 475 mm Ø Max. On transverse carriage: 315 mm Dot height: 260 mm Distance between points: 1500 mm Bed width: 350 mm Ø Main spindle hole: 80 mm Spindle revolutions: 0-2500 r.p.m. Main Motor Power: 11 Kw Diameter of the tailstock rod: 72 mm Rod travel to tailstock: 180 …

Price on request

Spain

Used PINACHO TAURUS 260 Cnc lathe Sold

Year: 2007

- photos and description: - center height 260 mm (max swing 530 mm over bed, swing over lonitudinal bed 475 mm) - swing over support 315 mm - center distance 1500 mm - spindle bore 80 mm - chuck DIN 55027 No 8 - Morse 5 - spindle RPM 564-2500 rev./min. - feeds 10 m/min - rapid speed 15 m/min - tail-stock adjustability 235 mm / 150 mm hydraulically - main drive 11 kW

Price on request

Slovakia

Used PINACHO TAURUS 260 Cnc lathe Sold

Year:

Entre pointe : 2000mm CNC : FANUC 21 i - T

Price on request

France

Pinacho Taurus 260 cnc lathe Sold

Year: 2001

CNC control: FAGOR 8055 TC Diameter above bed: 530 mm Diameter on longitudinal carriage: 475 mm Diameter on transversal carriage: 315 mm Height of centers: 260 mm Distance between centers: 1500 mm Bed width: 350 mm Spindle bore: 80 mm Spindle speed: 0-2500 rpm Main motor power: 11 Kw Diameter of tailstock rod: 72 mm Travel of the reed to the tailstock: 180 mm Spindle taper: Morse 5 Turret for automatic transmission: DUPLOMATIC Number of turret tools: 8 tools Fixed …

Price on request

Spain

PINACHO TAURUS 260 Cnc lathe Sold

Year: 2000

CNC: FANUC 21i-T DIAM TURNING MAXI EP: 520 mm SPINDLE BORE: 80 mm SPEED: 20-2500 rev / min POWER PIN: 11 Kw TIP LENGTH: 2000 mm TIP HEIGHT: 260 mm COUNTER POINT MANUAL AUTOMATIC TURRET

Price on request

France

Pinacho Taurus 260 Cnc lathe Sold

Year: 2004

CNC Lathe PINACHO. TAURUS Model-260. CNC FAGOR 8055. Distance between centers: 2000 mm. Diameter over bed: 530 mm. Diameter over the longitudinal slide: 475 mm. Diameter allowed over cross slide: 315 mm. Height: 260 mm. Bed width: 350 mm. Tools Ø: 40 mm. Hole spindle: 80 mm. Spindle nose DIN 55027 - # 8. 2 speed of 0-625 rpm, from 625 to 2500 rpm. Diameter of tailstock quill: 72 mm. Main Engine: 11Kw. Dimension: 5200x2025 mm. Weight: 3500 Kg Year …

Price on request

Spain

Pinacho TAURUS 260 Cnc lathe Sold

Year: 2007

CNC PINACO TAURUS 260 latheYear of manufacture 2007Numerical control FagorTurret 8 electric postsBetween Tip: 1500Passage pin 080Hydraulic ChuckHydraulic tipPower 22KwVery good conditionLocation FranceVisible in function

Price on request

France

Used PINACHO TAURUS 260 Cnc lathe Sold

Year: 2003

Price on request

Czech Republic

PINACHO Taurus 260 cnc lathe Sold

Year: 2007

Swing over support: 315 mm Spindle speeds: 1-650 / 1 - 2500 rev / min Rapid: 15 m / min Tailstock MK: 5 Quill stroke: 150 mm quill: 82 mm Main engine: 11 kW Total power requirement: 18 kW Space ca .: 3.5 x 2 x 2 m Machine is like new only about 1000 hours of operation 8-station tool turret 3-jaw chuck and various toolholder

Price on request

Germany

Used PINACHO TAURUS 260 Cnc lathe Sold

Year:

Price on request

Spain

Pinacho Taurus 260 cnc lathe Sold

Year: 2004

CNC lathe Brand: Pinacho Model: Taurus 260 CNC control: Fagor 8055 TC, Max diameter on bed: 530 mm, Max diameter on longitudinal carriage: 475 mm, Max diameter on cross slide: 315 mm, Center Height: 260mm, Distance between centers: 1500 mm, Bed width: 350 mm, Main spindle hole diameter: 72mm, Head revolutions: 0-2500 r.p.m., Main motor power: 11 kW, Diameter of the tailstock shank: 72 mm, Shank travel to tailstock: 180 mm, Morse taper of the tailstock: Morse 5, Barufaldi turret …

Price on request

Spain

PINACHO TAURUS 26 Cnc lathe Sold

Year:

Diameter of the plate: 530 mm Maximum turning lenght: 1625ep mm Spindle bore diameter: 80 mm Spindle nose: 8 ASA Main Spindle speed: 0-625-2500 RPM Feeds range: 0-7000 mm/min Turret type: 4 pos Main motor: 10 CV CNC control: FAGOR 8050T

Price on request

Spain

Pinacho Taurus 260 cnc lathe Sold

Year: 2000

Turning length 1500 mm Centerheight 265 mm Max. swing over bedways 530 mm Max. swing over cross slide 315 mm Spindle speeds 0-625/625-2500 rpm Spindle bore 80 mm Motor power 10 Hp Turret with 8 stations Control: Fagor CNC 8055 TC Equipped with: 3-jaw chuck 300 mm dia. 14 tool holders

Price on request

Denmark

Pinacho Taurus 260 cnc lathe Sold

Year: 2001

Used Pinacho CNC lathe - Distance betw. centers 1500 mm - Centre height 260 mm - Bore Ø80 mm - Speed 2500 RPM - Fagor 8055TC control - Duplomatic automatic tirret VDI40 8-pos - Several tools and holders included - A lot of soft jaws included - Really nice and well-kiept

Price on request

Denmark

Pinachio Taurus 260 Cnc lathe Sold

Year: 2008

Year: 2008 Make: Pinachio Model: Taurus 260 Swing Over Carriage: 475mm Swing over the Cross-slide: 315mm Distance Between Centres: 1500mm Rapid Feedrates: 10 m/min Spindle Bore: 80mm Spindle Motor Power: 11kW Spindle Nose: CAMLOCK no. 8 Spindle Speed: 0-564 and 564 - 2500 Swing: 530mm Tailstock Taper: MT 5 Turret Positions: 8 position Description: Tailstock, Interlocked guards, Low Volt Light, 3 Jaw Chuck, Gearbox This machine is offered Ex works, loaded free on Lorry, Payment before collection/Delivery. (Subject to no …

Price on request

United Kingdom

Pinacho Taurus 260 cnc lathe Sold

Year: 2004

Centre distance: 2.000 mm Turning diameter: 530 mm over bed 315 mm over cross slide CNC control: Fagor 8055 TC Spindle speeds: 0 - 2.000 Rpm Spindle bore: 105 mm Feed: 0 - 7.000 mm/rev. Electric toolturret: 8 positions Featured with: - 2 fixed steadies - 1 following steady - Users manual Country of origin: Spain Motor power: 11 kW Machine weight: 3.500 kg

Price on request

Netherlands

PINACHO TAURUS 260 cnc lathe Sold

Year:

PINACHO TAURUS 260 CNC FANUC 21i Bore diameter 520mm Height 260mm Chuck diameter 250mm Between tip 1600mm DUPLOMATIC turret 8 posts Machine in perfect condition

Price on request

France

Pinacho Taurus 260 cnc lathe Sold

Year: 2000

TAURUS MODEL 260 PARALLEL TYPE CONTROL FAGOR 8050 T DISTANCE BETWEEN POINTS mm. 2,000 DIAMETER MAIN HOLE mm. 80 DIAMETER ADMITTED ON CAR mm. 475 DIAMETER MAX. TURNING (mm) 520 DIAMETER ADMITTED ON BENCH mm. 530 WIDTH WIDTH mm. 350 AUTOMATIC TURRET Yes MOTORIZED TURRET No MAIN MOTOR POWER Kw. 17 RPM CABEZAL 2500 YEAR 2000 EXTERIOR MEASURES mm. 4980X1720X1820 WEIGHT 3300

Price on request

Spain

Used PINACHO TAURUS 260 cnc lathe Sold

Year: 2003

Price on request

Czech Republic

Pinacho Taurus 260 cnc lathe Sold

Year:

Pinacho Taurus 260 Cnc Lathe Machine that has hardly had a workload. Revised, no wear and no bumps. It is in very good condition and comes well equipped Ø Max. Over Bench: 530mm Distance between points: 1500mm X axis rapid advance: 10m / min Rapid feed Y axis: 10m / min Spindle turning speed: 0-2500rpm Main motor power: 17kW 1 Universal chuck 3 jaws Ø250 1 Universal chuck 4 jaws Ø250 1 Universal chuck 4 independent Ø400 jaws 2 VDI …

Price on request

Spain

Used PINACHO TAURUS 260 Cnc lathe Sold

Year: 2005

Price on request

France

PINACHO TAURUS 260 cnc lathe Sold

Year: 1999

• Swing over bed 530 mm • Max. Turning diametre 315 mm • Distance between center 1000 mm • Hydraulic chuck diametre 255 mm • Bar capacity ∅80 mm • Spindle speed 2500 rpm • Turret Manual 4 stations • Spindle power 17 kw • CNC Fagor 800T

Price on request

Spain

Pinacho Taurus 260 Cnc lathe Sold

Year: 2001

Very nice machine manufacturer PINACHO Tip height: 260mm Between centers: 2000mm Spindle speed, 2000 rpm Equipped with an automatic electric turret About Manufacturer PINACHO: founded in 1946 by Antonio Pinacho Oiartzun in Guipúzcoa province in Spain. The group still exists and has moved from its production Castejón del Puente in the province of Huesca.

Price on request

France

PINACHO Taurus 260 CNC centre lathe Sold

Year: 2010

CNC: Fanuc 0i-TC Swing Over Bed: 530mm Distance between centres: 1000mm Swing Over Cross Slide: 475mm Centre height: 260mm Spindle Speeds: 2500 r.p.m. Spindle Bore: 80mm number of guides and type: 2 Standard Turret / tool post: 8 pos.- CNC VDI30 Feeds: 10m/Min Bed width: 350mm 3 jaw chuck: Dia. 250mm - Hidr. / Hydr. (Halder) Equipped with: Through tool coolant, hydraulic tailstock Motor: 11KW

Price on request

Spain

Pinacho Taurus 260

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?

Turning length	1500 mm
Turning Ø	520 mm
Ø above the bed	530 mm
Ø above transversing slide	315 mm
Length between centers	1500 mm
Type of CNC	FAGOR 8055
X-axis	mm
Z-axis	mm
Max workpiece weight	kg
Spindle taper	80
Spindle bore	80 mm
Number of turrets	1
Number of tools on turret	8
Number of rotating tools	1
Turning speed	2500 rpm
Spindle motor power	11 kW
Tailstock	no
Bar feeder	no
-------------------
Length x width x height	4980.0 × 1720.0 × 1820.0
Weight	3500 kg