Tornos DECO 2000/10

Year:

Year: 1999

7 axes 101‘799 hours Kraft & Bauer fire extinguisher 2 driven tools bar feeder ROBOBAR SSF Z1 ballscrew replaced 3 months ago. All other axis have original ballscrews and railings. No Z3 or X3 on this machine

Year:

Technical data Number of axis total 10 Max. turning diameter 13 mm Spindle speeds: up to 10000 rpm Back spindle: Spindle positioning increment 0.1 ° speeds: up to 12000 rpm Various accessories: Spindle indexing device every 0.1 ° Bar loader number of bars LNS

Year: 2002

YOM: 2002 Bar capacity: min. 13mm / max. 16mm Max part length: 180mm (with live guidebush) Main spindle speed: 10000 min-1 Section of tools: 12x12 With bar feeder SSF-226 **10 axes

Year: 1998

Type: DECO 2000/10 Parameters: 10 mm Manufacturer: Tornos Bechler Year of production: 1998 Locality: Czech Republic Description: The lathe is offered with ROBOBAR 226 bar feeder. Dimensions: 170 x 101 x 200 [cm], weight: 1,5t. Maximum spindle speed: 12,000 [rpm]. Spindle power: 3.7 [kw]. The AD 2 control module is defective on this machine.

Year: 2001

control TB-Deco 14‘499 hours 11 driven axes C-axis on both spindles sub-spindle 10 tool holders 8 boring tools/drill holders 8 drill holders for flex-collets 1 ISCAR cut-off holder 6 rotating tools 1 rotating tool polygon with polygon disk various collets bar feeder FMB 2-16/3200/C

Year: 1996

Max. machining dia.: Ø10mm Spindle speed: 16,000 rpm Max. dia. in sub-spindle: Ø10mm Controller: TORNOS BECHLER system (FANUC 16-TB) Oil mist collector With TORNOS Robobar SSF barfeeder

Year:

Controller : Tornos Fanuc PNC Deco Number of axis total 10 Workpiece length max. 180 mm Internal spindle diameter 13 mm Spindle speeds: stepless from 100 rpm up to 12000 rpm Back spindle: speeds: from 100 rpm up to 8000 rpm Voltage 50 Hz 3x 400 Volt Spindle motor 2.2 kW Total power required 11 kVA Machine's weight about 2550 kg Overall dimensions machine: Length 2000 mm Width 1260 mm Height 1950 mm Various accessories: Set of toolholders Bar feeder …

Year: 1998

The machine has a 9-axis bar feeder ROBOBAR SSF Fire extinguisher Kraft & Bauer 2 driven tools 18 months ago replaced the screw axis Z1 X1 X2 Y1 Y2 Although the machine is 107,815 hours. work but because of the renovation is in good condition

Year: 2000

10 axis max bar diameter 16mm Max workpiece length 180mm Spindle max 3,7kW - 12000 RPM / Subspindle max 2,2kW - 12000 RPM complete with original Robobar SSF Bar loader

Year: 2002

Bar capacity: min. 13mm / max. 16mm Max part length: 180mm (with live guidebush) Main spindle speed: 10000 min-1 Section of tools: 12x12 With bar feeder SSF-226 **10 axes

Year: 2008

Number of axis total 8 Workpiece length max. 180 mm Internal spindle diameter 13 mm Collet device F20 Spindle speeds: stepless from 100 rpm up to 12000 rpm C axis (spindle,resolution) 0.1 ° Back spindle: speeds: from 100 rpm up to 10000 rpm C axis (spindle,resolution) 0.1 ° Back machining workpiece length max. 180 mm Tool-holder: number 2 Number of stations 5 number of driven tools 3 Spindle speeds (turning tools) 100 - 8000 rpm Driven tools (number) ESX-20 Power …

Year: 2001

control TB-Deco 14‘499 hours 11 driven axes C-axis on both spindles sub-spindle 10 tool holders 8 boring tools/drill holders 8 drill holders for flex-collets 1 ISCAR cut-off holder 6 rotating tools 1 rotating tool polygon with polygon disk various collets bar feeder FMB 2-16/3200/C

Year: 1998

9 axes 107‘815 hours Kraft & Bauer fire extinguisher 2 angetriebene Werkzeuge Lademagazin ROBOBAR SSF Z1 X1 X2 Y1 Y2 lead screws and railings replaced 18 months ago