Machine's specifications - Weinig Profimat 23 Used machines

Manufacturer	Weinig
Model	Profimat 23
Category	Moulders - multihead

Used Weinig, Model Profimat 23E. Moulder Machine Sold

Year: 1996

Specifications Capacity: 9" x 5" • Adjustable infeed table and fence 78'' • 1-1/2'' diameter spindles • Head Configuration: Bottom: 10 HP; Right/Left: 15 HP; Top: 15 HP; Bottom: 10 HP • Spindle Speed is 6,000 RPM • Feed motor: 3HP • Feed Speeds infinitely variable 18-72 FPM • Motors are 3PH 230/460V

Price on request

USA

WEINIG PROFIMAT 26 Moulder Sold

Year: 2005

Planer Moulder WEINIG Profimat 26 super year 2005 Composition: 5 trees Cutting width: 20-230mm Cutting height: 8-120mm Slot Table All system widths Adjustable drive: 6-36mts/mn COMPOSITION: 1 THICKNESSER 1 ROUTER RIGHT 1 SPINDLE LEFT 1 SHAFT PLANING 1 SHAFT LOWER

Price on request

France

Hobel- und Kehlautomat PROFIMAT 23E Sold

Year: 1997

Hobelbreite mm 230 Hobelhöhe mm 120 Anzahl Spindeln 4 Spindeln unten 1 Spindeln rechts 1 Spindeln links 1 Spindeln oben 1 Spindelanordnung u-r-l-o Hauptmotor kW 5,5 Antrieb Vorschubrollen Kardan Vorschub max m/min 24 Vorschub Stufenlos Ja Tischlänge mm 2.000 Oberdruck pneumatisch Ja Verstellung elektrisch Hobelhöhe Vorabrichtfräser Ja Schallschutzhaube Ja Druckluft bar 6 Absauganschluss mm 4x 140 Gesamtanschluss kW 22,00 Platzbedarf LxBxH mm 3900x1600x2050 Gewicht ca. kg 2.700

Price on request

Germany

Hobel- und Kehlautomat WEINIG PROFIMAT 23E Sold

Year: 2001

Hobelbreite mm 230 Hobelhöhe mm 120 Anzahl Spindeln 6 Spindeln unten 2 Spindeln rechts 1 Spindeln links 1 Spindeln oben 1 Unispindel Ja Spindelanordnung u-r-l-o-u-uni Separater Motor je Spindel Ja Antrieb Vorschubrollen Kardan Vorschub kW 3 Vorschub max m/min 24 Vorschub Stufenlos Ja Tischlänge mm 2.000 Oberdruck pneumatisch Ja Verstellung elektrisch Hobelhöhe Schallschutzhaube Ja Druckluft bar 6 Platzbedarf LxBxH mm 3700x2000x2000 Gewicht ca. kg 3.500 Verfügbarkeit kurzfristig, ab Standort * Motorstärkenn rechts/links (ein Motor) 7,5kW, 1x unten 5,5kW, oben

Price on request

Germany

Hobel- und Kehlautomat PROFIMAT 23 Sold

Year: 1995

Hobelbreite mm 230 Hobelhöhe mm 180 Anzahl Spindeln 6 Spindeln unten 2 Spindeln rechts 2 Spindeln links 1 Spindeln oben 1 Spindeldrehzahl max U/min 6.000 Spindelanordnung u-r-l-r-o-u Hauptmotor kW 4 Antrieb Vorschubrollen Kardan Vorschub kW 2,2 Vorschub max m/min 24 Vorschub Stufenlos Ja Tischlänge mm 2.000 Oberdruck pneumatisch Ja Verstellung elektrisch Hobelhöhe Schallschutzhaube Ja Druckluft bar 6 Platzbedarf LxBxH mm 4000x1700x1600 Gewicht ca. kg 3.200

Price on request

Germany

Corroyeuse 4 P.O. WEINIG d'occasion Sold

Year:

– Largeur 220 x hauteur 130 mm – Table d'entrée 2,50 m – Dégau = 5,5 CV – Toupie droite = 10 CV – Toupie gauche = 10 CV – Raboteur supérieur = 10 CV – Entraînement = 2 CV – Vitesse = 4 à 20 m/min. Pression mécanique – Barillet à 8 positions sur toupie gauche – Raboteur débrayage pour réglage indépendant.

Price on request

France

Moulurière quatre faces WEINIG PROFIMAT 23 occasion Sold

Year: 1994

Capacité: 230 x 130 mm. Nombre d`arbres: 6 dessous 5,5 kW, droite et gauche 5,5 kW, dessus 7,5 kW, dessous 5,5 kW Table à rainures trempée Toupie toutes largeurs Table de dégauchissage de 2,5 m. Avance 2,2 kW Diamètre de l`arbre 40 mm.

Price on request

Belgium

Used WEINIG Profimat 23 E Moulder Sold

Year: 1997

Price on request

Poland

Used WEINIG PROFIMAT 23 4 side Moulder Sold

Year: 1994

Price on request

France

Used WEINIG Profimat 23E Moulder Sold

Year: 1994

Price on request

Germany

Used WEINIG, Model PROFIMAT 23E. Moulder Sold

Year: 2000

Price on request

USA

Weinig Profimat 22 N Moulder Sold

Year:

Used 4 sided planing machine WEINIG Profimat 22 N

Price on request

Germany

Used Weinig, Model Profimat 23E. Moulder Sold

Year: 1996

Photos................ Upon Request Description: Profimat 23E Five Head Moulder Capacity: 9" x 5" Adjustable infeed table and fence 78'' 1-1/2'' diameter spindles Bottom: 10 HP; Right/Left: 15 HP; Top: 15 HP; Bottom: 10 HP Spindle Speed is 6,000 RPM Feed Speeds infinitely variable 18-72 FPM Includes dust manifold Voltage: 230V, 60Hz, 3Ph

Price on request

USA

Used weining PROFIMAT Moulder Sold

Year:

Price on request

Poland

Used WEINIG PROFIMAT 23 Moulder Sold

Year:

Price on request

France

Used WEINIG Profimat 23. 6 Head, Moulder Machine, w/ enclosure and controls Sold

Year: 1995

Head order B-R-L-T-T-B. 230 volt, 3 phase. Maximum lumber capacity 9-1/16" x 4-3/4"

Price on request

USA

Used Weinig Profimat 23E. 5 Head, Moulder, w/ mechanical digital readouts Sold

Year: 1998

Specifications 5-Head machine; 4-11/16" x 9-1/16" capacity; 10 HP bottom head; right and left vertical head powered by (1) 15 HP motor; 15 HP top head; 10 HP bottom head; all spindles are 1-1/2" diameter and 6,000 RPM; 4 HP variable speed feed of 18 to 78 FPM; 78" infeed straightening table; manual waxlit pump; mechanical digital readouts on all spindles; DigiSet readouts on left and top spindle for accurate setup; hardened bed insert in front of first bottom head; …

Price on request

USA

Used WEINIG PROFIMAT 23 Moulder Sold

Year:

Capacity 230 x 130 mm - Air Pressure - Variable Advance - Very good condition - Robust machine for all carpentry work - carpentry - parquet WEINIG - Moulder 5 Tool Holders

Price on request

France

Used WEINIG PROFIMAT 22 N Moulder Sold

Year:

Manufacturer: WEINIG Type: PROFIMAT 22 N Width: 220 mm Working height: 120 mm Infeed table: 1970 mm 4 HEADS

Price on request

Poland

Weinig PROFIMAT 23 Moulder Sold

Year: 1998

Working width 250mm working height of 120mm 5 heads 40mm diameter spindles adjustable heads in two axes Spindle speed 6000 rpm. / min electrically adjustable clamping beam Pneumatic clamps top feed cardan shafts loading table length 1970mm variable speed feed feed speed range 5-24m/min installed capacity of 28kW year 1998 380V power supply

Price on request

Poland

Weinig Profimat 23 E Moulder Sold

Year: 1998

The purpose of this notice is to planer Weinig Profimat23 Type: P 23 E Year: 1998 The price is net

Price on request

Poland

Four Side Planer, 5-Spindle Moulder WEINIG PROFIMAT 23 E Sold

Year: 2000

Four Side Planer, 5-Spindle Moulder WEINIG PROFIMAT 23 E Type/Model: PROFIMAT 23 E, P23E Construction Year: 2000 Machine Condition: Very Good Documentation: Full Technical Documentation, User Manual, Spare Parts Catalog Technical Details: • Number of spindles: 5psc. • Spindle order: Bottom, Right, Left, Top, Bottom • Working width: 20-230mm • Working height: 8-120mm • Horizontal spindles power: 4kW/5,5HP • Vertical spindles power: 5,5kW/7,5HP • Feed motor power: 2,2kW3HP • Spindle speed: 6000RPM • Spindle diameter: 40mm • Feed Speed infinitely …

Price on request

Poland

WEINIG PROFIMAT 23 Planing machine Sold

Year: 2001

MOULDER brand: WEINIG model: PROFIMAT 23 FEATURES: WORKING WIDTH 230 mm. WORKING HEIGHT 120 mm. VARIABLE SPEED FLOOR ENTRANCE FROM 2000 ELECTRIC LIFTING ADJUSTING THE AIR DRIVE ADJUSTMENT THROUGH GRIT set of the DIAMETER TOOL COMPOSITION OF SHAFTS: 1 LOWER HORIZONTAL SHAFT 1 LEFT VERTICAL SHAFT 1 RIGHT VERTICAL SHAFT 1 SUPERIOR HORIZONTAL SHAFT 1 LOWER HORIZONTAL SHAFT 1 UNIVERSAL SHAFT 360 °

Price on request

Italy

Used Weinig Profimat 23 Moulder Sold

Year:

planing width 230mm Working height 120mm spindle alignment: 1 lower 4kW 2/3. right / left 7.5 kW 4 upper 7.5 kW 5 lower 4kW 40mm diameter spindles Spindle speed 6000 rpm. / min adjustment spindles in two axes electrically adjustable clamping beam Pneumatic clamps top feed cardan shafts installed capacity of 27kW 380V power supply

Price on request

Germany

Weinig Profimat 23 Moulder Sold

Year: 1994

Working width 230mm working height of 120mm 6 spindles 40mm diameter spindles spindle alignment: bottom / right / left / right / top / bottom feed cardan shafts pneumatic clamps lubrication top loading table length 1970mm year 1994 380V power supply

Price on request

Poland

WEINIG PROFIMAT 23 Moulder Sold

Year: 1994

Moulder to 5 trees Brand: Weinig Model: Profimat 23 year: 1994

Price on request

Italy

Used Weinig Profimat 23 Moulder Sold

Year: 1996

Moulder - Manufacturer: Weinig - Year: 1996 - Type: Profimat 23 - Number of spindles: 7 - Spindle configuration - engine power: bottom - 4,5 kW; right, left - 7,5 kW; Up - 4.5 kW; Up - 4.5 kW; Down - 4 kW, saw for cutting - 12 kW - Feed continuously adjustable 5-24 m / min, cardan shafts - Height of workpiece: max 120 mm - Width of the workpiece: max 230 mm - Weight: 3500 kg

Price on request

Poland

Weinig Profimat 22 N Moulder Sold

Year: 1990

Weinig moulder Profimat 22 N, in perfect condition. 5 + 1 axis.

Price on request

Spain

WEINIG Profimat 22 Moulder Sold

Year:

Composition trees below - right - left - movable shaft

Price on request

Italy

WEINIG Profimat 23E Moulder Sold

Year: 1997

Under-left-right-up-down-universal Universal spindle with HSK spindle run by inverter 1997 Machine in very good condition Used equipment to CE regulations

Price on request

Italy

Used Weinig Profimat 22 N Moulder Sold

Year:

- Max workpiece width 22cm - Max workpiece height 12cm 4 STEM 1 horizontal bottom 22cm - 4 kW 2 vertical law 3 vertical left - 5.5 KW 4 horizontal top 22cm - 4 kW - All heads adjustable up / down, right-left - Spindle diameter 40 mm - 4 shafts extending toothed, upper - Roller discharge from the top rubber wide, stretching - Roller discharge from the bottom of the rubber wide, stretching - FEED on the ramparts DRIVE …

Price on request

Poland

Used Weinig Profimat 22 N Moulder Sold

Year:

- Max workpiece width 22cm - Max workpiece height 12cm 4 STEM 1 horizontal bottom 22cm - 5.5 kW 2 vertical right, left vertical 3 - 7.5 kW 4 horizontal top 22cm - 7.5kW - All heads adjustable up / down, right-left - Spindle diameter 40 mm - 4 shafts extending toothed, upper - Roller discharge from the top rubber wide, stretching - Roller discharge from the bottom of the rubber wide, stretching - FEED on the ramparts DRIVE - …

Price on request

Poland

Used Weinig Profimat P 23 E Moulder Sold

Year:

TECHNICAL PARAMETERS : - Width 250mm - Working height 140mm - 5 HEADS 1-HEAD LANDSCAPE - ENGINE 5.5 kW 2-HEAD VERTICAL (left and right) - ENGINE 7.5 kW 4 - HEAD HORIZONTAL UPPER - ENGINE 7.5 kW 5 HEAD LOWER - ENGINE 5.5 kW - FEED ENGINE - 3 kW FULL RANGE OF ADJUSTMENT SPINDLE - 4 pinch rolls gears - top - Rolls receiving tandem lower and upper - Diameter of 40mm spindles - Turnover of spindles 6000 rpm. …

Price on request

Poland

Used Weinig Profimat P 23 E Moulder Sold

Year: 1996

Price on request

Poland

WEINIG PROFIMAT 23 Planing machine Sold

Year: 1996

Year: 1996 Manufacturer: WEINIG Model: 23 PROFIMAT TABLE GROOVES / DEVICE WOOD COURTS 5 DOOR TOOLS / RETURN PARTS BY CARPET TRAINER + EDGE ARMINUS WOOD NO PARALLEL "

Price on request

France

WEINIG PROFIMAT 23 E Used multihead moulder Sold

Year: 1998

Capacity: 230 x 130 mm. Spindles: 5 Bottom 4 kW, fence and near 5,5 kW, top 5,5kW, bottom 4 kW Grooved bed Random side head 2,5 m. pre-straightening table Feed 3 kW Spindle diameter 40 mm.

Price on request

Belgium

Weinig PROFIMAT 23E 004 Used multihead moulder Sold

Year: 2003

Brand Name: Weinig Model: Profimat 23E 004 Year: 2003 Molding machine 23E 6 heads

Price on request

Portugal

Weinig PROFIMAT 23 E Used multihead moulder Sold

Year:

6-axis molding machine with power supply parts. Machine revised and ready for use. Maximum working width = 230 mm. Maximum working height = 130 mm. Working area with closed cabin and lighting. Several centralized greasing points. Digital readers measured on all spindles. Pedal manual plate grease pump. Cardanic drag with pneumatic regulation of the pressure in the independent rollers for group rollers steel and group rollers rubber. Positioning of height motorized drag. Advance with variable speed of 5 to 24 …

Price on request

Spain

Weinig PROFIMAT 23 E Used multihead moulder Sold

Year:

Price on request

Spain

Weinig PROFIMAT 23 E Used multihead moulder Sold

Year:

Price on request

Spain

Weinig Profimat Used multihead moulder Sold

Year: 1994

- machine used in very good condition - year of production: 1994 - working width: 230 mm - working height: 120 mm - 5 heads - head locations: D / P / L / G / D - head diameter: 40 mm - lubrication pump - head adjustment in two axes - smooth feedrate adjustment Spindle speed: 6000 RPM - 380 V power supply - Planer armed with heads - Diameter for 5 tubes included

Price on request

Poland

Weining Profimat 22 Used multihead moulder Sold

Year:

WEINIG Profimat 22N 5-head planer Straight from the production, not drinking, not painted, even not vacuumed. - max. workpiece width 220 mm - max. height of the workpiece 140 mm - 5 spindles: 1) horizontal bottom 220 mm, 4 sq 2) right vertical 140 mm 3) left vertical 140 mm, one right and left engine 5.5 kw 4) horizontal top 220 mm, 7.5 kw 5) horizontal bottom 220 mm, 4 sq - all up / down adjustable heads, right-left - …

Price on request

Poland

Weinig Profimat 23 Used multihead moulder Sold

Year: 1995

Production year: 1995 Working width: 250 mm Working height: 130 mm 6 Heads + SAW 1 horizontal lower head 4kw 1 vertical right head 1 vertical head left - common engine 7.5 kw 1 vertical head, right 4 kw 1 horizontal head, upper 4 kw 1 horizontal head lower 4 kw 1 warhead with a 2.2-kw saw Feed table: 1970 mm x 260 mm Drive of feed wheels - cardan shafts Pressure of pneumatic wheels Smooth feed regulation Sound-absorbing cabin …

Price on request

Poland

Weinig Profimat 23 Used multihead moulder Sold

Year: 1994

5Postes 230 / 120mm Digital display 380V

Price on request

Belgium

Weinig Profimat 23P Used multihead moulder Sold

Year: 1995

4 sides WEINIG PROFIMAT 23P moulding machine Description : -Max. working width: 230 mm -Max. working height: 130 mm -Lowering of the electro-motorized beam with digital display -Moving and displaying axes on Siko counter -Tree of the planer -Straight spindle moulder -Warped spindle moulder -1 Planing shaft -5.5 hp engine -Shaft diameter 40mm Dimension: 4000 x 1600 x 1600 x 1600h mm Total power: 31 kW

Price on request

France

Used WEINIG PROFIMAT 23 E multihead moulder Sold

Year:

Used WEINIG PROFIMAT 23 E multihead moulder with 5 shafts in excellent condition plane up to 23 cm in width, 12.5 cm in height Reason for sale: little use

Price on request

Italy

Weinig Profimat Wood combined machine Sold

Year:

Purpose: four-sided planing and profiling of wood for the production of various molded products. Peculiarities: - milling spindles: 5 - processing width: 230 mm - working height (stitching thickness): 150 mm

Price on request

Russia

Used Weinig Profimat 23 Used multihead moulder Sold

Year:

- Max workpiece width 23cm - Max workpiece height 13cm - 5 spindles: 1) horizontal bottom 23cm, 5.5 kW 2) vertical right 13cm 3) vertical left 13cm (2 and 3 spindle 11kW) 4) horizontal top 23cm, 11kW 5) horizontal bottom 23cm, 7.5kW - All heads adjustable up / down, right-left - Electric brake heads - 4cm diameter spindles - Gear shafts extending from the top 4 in the 2 double - Shaft discharge from the top rubber triple wide, stretching …

Price on request

Poland

Moulurière WEINIG PROFIMAT 23 Sold

Year: 1995

Voltage 380V 50Hz 3Ph Capacité: 230 x 130 mm Arbres: 4 - Dessous 4 kW - Gauche/droite 5,5 kW - Dessus 4 kW Vitesse d��alimentation adaptable avec variateur (5-24m/min) Longueur table entrée: 1400 m Déplacement de la poutre supérieur motorisé Ajustement des arbres avec affichage mec/digitales Machine capotée Pression sur les rouleaux variable 4 points d'aspirations: diamètre 130 mm P.O. Tersa Puissance installée: 17 kW

Price on request

Belgium

Used Weinig Profimat Moulder Sold

Year: 1999

YOM. 1999 Working width 45cm Working height 25 cm Infinitely variable feed max 18m/min Rolls pulling in the table The pump lubricant. 4 heads - down / right / left / up very good condition, ready to operate

Price on request

Poland

Weinig Profimat 23 Used multihead moulder Sold

Year:

Working width 230mm Working height 120mm 5 heads Head configuration: bottom / right / left / top / bottom Spindle diameter 40mm Adjustable heads in two axes Electric adjustment of the pressure beam Pneumatic clamps Table top lubrication system Power 380V

Price on request

Poland

Weining Profimat 23 Used multihead moulder Sold

Year:

working width 250mm working height 180mm 6 heads head system: bottom / right / left / top / bottom / universal Smooth feed speed regulation feed on cardan shafts pneumatic clamps of pulling rollers spindle rotation 6000 rpm diameter of 40mm spindles table top lubrication metal roller pulling in the exit table

Price on request

Poland

Weinig Profimat 23 Used spindle moulding machine Sold

Year: 1996

Producer Weinig - Type Profimat 23 Mobilspindel - Hobelbreite 10 - 230 mm - Hobelhöhe 4 - 120 mm - Anzahl der Hobelwellen 5 Stk. - Year of construction 1996 - Length des Abrichttisches 2.000 mm - mit Mobilspindel - Spindle U/R/L/O/U - Spindle U 5,5 kW - Spindle O 7,5 kW - Spindle left and right 7,5 kW - Welle unten 11 kW - Spindle rotation speed 6.000 U/min - Andruckwalzen pneumatisch max. 6 bar - Feed speed 5 …

Price on request

Lithuania

WEINIG PROFIMAT 23 Used multihead moulder Sold

Year:

Working width: 230 mm Working height: 120 mm 6 HEAD 1 horizontal head lower 4 kw 1 vertical right head 1 vertical head left / common motor 7.5 kw 1 horizontal head upper 7.5 kw 1 horizontal head, upper 4 kw 1 horizontal head lower 4 kw Supply table 1970 x 2650 mm Drive of feed wheels - cardan shafts Pressure of pneumatic feed wheels Electronic feed regulation 5-20 m / min Automatic table lubrication Grooved table Sound-absorbing cabin Overall …

Price on request

Poland

Used WEINIG Profimat 23 E Planing machine Sold

Year:

four side planer with all widths

Price on request

France

Used Weinig Profimat 23 Used multihead moulder Sold

Year:

Specifications Manufacturer Weinig Profimat model 23 Warehouse number MGB018 Description Working width 10 - 230 mm Working height 4 - 120 mm Introduction table 2500 mm Cardan drive system Feed speed 5 - 24 mt / min N ° 5 working groups arranged as follows: lower horizontal group right Toupie group left Toupie group upper horizontal group universal group 0-360 degrees Motor brake system on the groups

Price on request

Italy

Weinig PROFIMAT 22 Used multihead moulder Sold

Year:

working width 220mm working height 120mm 4 heads diameter of 40mm spindles adjustment of heads in two axes pneumatic clamps of pulling rollers Smooth feed speed regulation feed on cardan shafts

Price on request

Poland

WEINIG PROFIMAT 23 E Moulder Sold

Year: 1996

MOULDER / PLANER A 5 TREES Max. Work: 230 mm Max. Work: 130 mm Disposition of the trees: 1 horizontal bottom 10 HP 2 ° -3 ° vertical right - left with only 10 HP engine 4th upper horizontal 10 HP 5 ° below horizontal 10 HP All trees give. 40 mm Shafts rotation speed: 6000 r / min. Feed motor HP 4 - Veloctà variable feeding from 5 to 25 m / min. Total installed power: 32 Kw. Advancement …

Price on request

Italy

WEINIG PROFIMAT 23 E Moulder Sold

Year: 1997

- USED - Lower horizontal, vertical right, left vertical, horizontal top, horizontal bottom - Aggregate recovery strips - EC (1997)

Price on request

Italy

Weinig Profimat 22 Used multihead moulder Sold

Year:

Working width 220mm Working height 120mm 4 heads Adjustment of heads in two axes Diameter of 40mm spindles Smooth feed speed regulation Pneumatic clamps Electric adjustment of the pressure beam

Price on request

Poland

Used Weinig Profimat 23E Moulder Sold

Year:

TECHNICAL PARAMETERS : - Width 250mm - Working height 120mm - 5 HEADS 1-HEAD LANDSCAPE - 4 KW 2-HEAD VERTICAL (left and right) - 5.5 KW 4 - HEAD HORIZONTAL UPPER - 5.5 kW 5 HEAD LOWER - 5.5 KW - FEED - ENGINE 2.2 kW

Price on request

Poland

Weinig Profimat 23 Used multihead moulder Sold

Year:

Weinig

Price on request

Poland

Used Weinig, Model Profimat 23E. 5 Head, Moulder Machine Sold

Year: 1996

Specifications Capacity: 9" x 5" • Adjustable infeed table and fence 78'' • 1-1/2'' diameter spindles • Head Configuration: Bottom: 10 HP; Right/Left: 15 HP; Top: 15 HP; Bottom: 10 HP • Spindle Speed is 6,000 RPM • Feed motor: 3HP • Feed Speeds infinitely variable 18-72 FPM • Motors are 3PH 230/460V • Includes dust manifold

Price on request

USA

Weinig Profimat 23 Horizontal milling machine Sold

Year: 1994

Make: WEINIG Model: Profimat 23 Year: 1994 Spindles 5 5 heads 125 Ø Various accessories

Price on request

Germany

WEINIG PROFIMAT 23 E Used multihead moulder Sold

Year:

TECHNICAL PARAMETERS: - Planing width 230 mm - Planing height 120 mm - Spindle diameter 40 mm - Four heads - 6000 RPM spindle - Lower spindle 5.5 kW - Spindle right and left 7.5 kW - Upper spindle 7.5 kW - Motor height adjustment 0,37 kW - The length of the countertop initial 197 cm - ATS system - positioning - Electrically adjustable head left - Electrically adjustable upper head - The top four steel rollers - One upper …

Price on request

Poland

Weinig Profimat 22 N Used multihead moulder Sold

Year: 1990

Price on request

Spain

WEINIG PROFIMAT 22 N Moulder Sold

Year: 1986

Manufacturer: WEINIG Type: PROFIMAT 22 N Width: 220 mm Working height: 120 mm Feeding table: 1970 mm 4 HEADS

Price on request

Poland

WEINIG PROFIMAT 23 E Moulder Sold

Year: 2000

Planing machines Moulder machine consisting of 5 shafts: bottom planer shaft right shaft left shaft upper planer shaft bottom planer shaft

Price on request

Italy

WEINIG PROFIMAT 23 E Used multihead moulder Sold

Year: 1996

- Planing width 230 mm - Planing height 120 mm - Cardan feeding, motor 4 kW - Feed speed 5 – 24 m/min - infeed table 2500 mm - Spindle diameter 40 mm Spindle layout: 1. Horizontal bottom spindle, 4 kW 2. Vertical spindle right, 3. Vertical spindle left 7.5 kW electronic positioning 4. Horizontal top spindle, 5,5 kW, electronic positioning 5. Horizontal bottom spindle, 4 kW, 6. Universal spindle, 5,5 kW, CE Mark this extra information is standard for …

Price on request

Italy

Weinig Profimat 23 Used multihead moulder Sold

Year:

Weinig Profimat 23 four-side planer working width 230mm working height 120mm 5 heads arrangement of heads: lower / right / left / upper / lower smooth regulation of the feed speed on the inverter electric adjustment of planing dimensions length of the feeding table 2470mm pneumatic clamps of the drawing rollers feed on cardan shafts

Price on request

Poland

Used Weinig Profimat 23 Used multihead moulder Sold

Year:

- Max workpiece width 23cm - Max workpiece height 13cm - 5 spindles: 1) horizontal bottom 23cm, 5.5 kW 2) vertical right 13cm 3) vertical left 13cm (2 and 3 spindle 11kW) 4) horizontal top 23cm, 11kW 5) horizontal bottom 23cm, 7.5kW - All heads adjustable up / down, right-left - Electric brake heads - 4cm diameter spindles - Gear shafts extending from the top 4 in the 2 double - Shaft discharge from the top rubber triple wide, stretching …

Price on request

Poland

Used Weinig Profimat 23 Moulder Sold

Year:

- Max workpiece width 24cm - Max workpiece height 14cm - 5 spindles: 1 ) horizontal bottom 24cm , 5.5 kW 2 ) vertical right 14cm 3 ) vertical left 14cm (spindle 2 and 3 to 7.5 kW) 4) horizontal top 24cm , 7.5 kW 5) horizontal bottom 24cm , 7.5 kW - All heads adjustable up / down , right and left - 4cm diameter spindles - Gear shafts extending from the top 4 of which two double - …

Price on request

Poland

Used Weinig Profimat 22 N Moulder Sold

Year:

Working width: 220 mm Working height: 120 mm Loading table: 1970 mm x 220 mm 4 HEADS: 1) horizontal head lower 2) The vertical head law 3) The left vertical head 4) The head horizontal top Spindle diameter of 40 mm Feed wheel drive cardan shafts pressure pneumatic rollers infinitely adjustable feed 4 - 20 m / min table lubrication - hand pump dimensions: dł.330 cm, szer.145 cm, wys.130 cm; Weight: 1.500 kg

Price on request

Poland

Used Weinig Profimat 23 Used multihead moulder Sold

Year: 1999

Scorniciatrice Weinig Profimat 23, Norma CE

Price on request

Italy

Weinig Profimat 22 N Used multihead moulder Sold

Year: 1990

5 axis moulder and lateral straightener the final shaft is universal can be placed in the position we want,

Price on request

Spain

Weinig Profimat 23 Used multihead moulder Sold

Year: 1994

working width 230mm working height 120mm 6 spindles diameter of 40mm spindles Spindle system: bottom / right / left / right / top / bottom feed on Cardan shafts pneumatic clamps table lubrication system length of the 1970mm table top year of production 1994 380V power supply

Price on request

Poland

Hobel- und Kehlautomat WEINIG PROFIMAT 23E Sold

Year: 2000

Hobelbreite mm 230 Hobelhöhe mm 120 Anzahl Spindeln 5 Spindeln unten 2 Spindeln rechts 1 Spindeln links 1 Spindeln oben 1 Spindelanordnung u-r-l-o-u Hauptmotor kW 7,5 Antrieb Vorschubrollen Kardan Vorschub kW 2,2 Vorschub max m/min 24 Vorschub Stufenlos Ja Tischlänge mm 2.000 Oberdruck pneumatisch Ja Glasleiste austrennen Ja Verstellung elektrisch ATS-System Vorabrichtfräser Frässcheibe Schallschutzhaube Ja Druckluft bar 6 Gesamtanschluss kW 23,00 Gewicht ca. kg 3.500 CE-Zeichen Ja

Price on request

Germany

Weinig Profimat 23 Used multihead moulder Sold

Year:

working width 230mm working height 120mm 5 heads head system: bottom / right / left / top / bottom adjustment of heads in two axes diameter of 40mm spindles Smooth feed speed regulation feed on cardan shafts 380V power supply

Price on request

Poland

WEINIG PROFIMAT 22 N Moulder Sold

Year: 1991

Planing machines Serial Number: 226-6207 5-spindle Working width up to 220mm Working height up to 120mm Power: 380v 50hz

Price on request

Spain

Weinig Profimat 23 Used spindle moulding machine Sold

Year: 1997

Capacity: 230 x 130 mm. Spindles: 4 Bottom 4 kW, fence and near 5,5 kW, top 4 kW 2,5 m. pre-straightening table Feed 1,8 kW Spindle diameter 40 mm. Feed 5 - 24 m/min

Price on request

Belgium

WEINIG PROFIMAT 23 E Used multihead moulder Sold

Year: 1997

Motor Power 43 Kw-100 A Voltage 380 V C.E. Yes Maximum working width 230mm Maximum working height 150 mm Axes diameter 40 mm Total Nº axis 5 Drill right axis Yes 9.2 Kw Hp variator 4 kw Nº higher drag 5 Nº bottom drag 1 Length table entry 2000 mm Pneumatic pressure Yes Electronic speed Variator Yes Cabin Yes Cardan shaft transmission Yes

Price on request

Spain

WEINIG PROFIMAT 22 Used multihead moulder Sold

Year:

width 220mm working height 120mm 5 heads head arrangement: lower / left / right / upper / Universal Mobile spindle - measuring the width of the control heads in two axes variable speed control feed pneumatic clamps electrically adjustable pressure beam top lubrication 380V power supply

Price on request

Poland

WEINIG Profimat 23 EL Moulder Sold

Year: 1998

Profimat 23E WEINIG 5 trees Under-left-right-up-down 1998 ATS Control (thickness and width aut) Charger EM10 Machine in very good condition

Price on request

Italy

Weinig Profimat 26 Moulder Sold

Year: 2004

Universal machine 5+ 2004 260x140 mm working width Composition: under, left, right, top, bottom, universal preplaner mm.2500 Engines: 1 under HP 10, HP 10 2/3 side, over 7.5 HP, HP under 7.5, HP Universal 7.5 Pneumatic pressure feed rollers At the king side preplaner progress cardan

Price on request

Italy

Used WEINIG Profimat 23 E Moulder Sold

Year:

5 heads down / left / right / up / down Drive up and down - 5 rolls extending from the top - 1 roll of pulling from the bottom Infinitely variable feed Working width 23 cm Working height 12 cm All heads with fully adjustable

Price on request

Poland

Used Weinig Profimat 23 Moulder Sold

Year:

width 230mm Working height 120mm 5 heads grooved top head adjustable in two axes 40mm diameter spindles RPM spindles 6000 rpm. / min pneumatic clamps feed on cardan shafts Feed rate 380V power supply

Price on request

Poland

WEINIG PROFIMAT 23E Used multihead moulder Sold

Year: 1999

Available from June 2021 WEINIG PROFIMAT 23E moulder with 6 shafts: - useful working measures 230x120mm - 2 axis electronic programmer (width and thickness) - cardan drive and pneumatic pressure - variable feed speed from 5 to 24 mt / min - feed motor power kw 2,2 - upper feed wheel before the 1st shaft - tandem advancement unit in front of the 2nd shaft - tandem advancement group between the 5th and 6th shaft - Grooved plane from 1st …

Price on request

Italy

Weinig Profimat 23 Used multihead moulder Sold

Year:

Four-side planer WEINIG UNIMAT 23 E

Price on request

Poland

Used Weinig Profimat 23C. Moulder, w/ spring loaded with 2 rollers Sold

Year: 2000

Specifications 5 Head (B-R-L-T-B), working cap. 9-1/16” x 4-11/16” Spindle sequence: Bottom 10HP motor, right & left by 10HP motor, top 15HP and bottom 10HP motor. Spindles 1-1/2” dia. with cutterhead speed of 6,000RPM. Mechanical digital readouts on all spindles. DigiSet readouts on left and top spindles for accurate setup. Chipbreaker and pressure element with mechanical digital readouts. Variable feed speed from 16-78 FPM drive with 4HP motor.Carden feed drive (chainless feed system); hardened bed insert in front of 1st …

Price on request

USA

Weinig Profimat 23 Used multihead moulder Sold

Year: 1993

Manufacturer: WEINIG type: Profimat 23 the year of manufacture: 1993 working width: 250 mm Height: 130 mm 5-head; 1 the horizontal head lower 4 kw 1 vertical head law 7.5 kw 1 vertical head left/common engine 1 the horizontal head top 5.5 kw 1 the horizontal head 4 kw- feeding tray 1970 mm x 260 mm For the first head table ryflowany feed wheel; cardan shafts elements wheels Pressure automatic pneumatic feed feed adjustable Lubrication table hand pump soundproof Cabin …

Price on request

Poland

Weinig Profimat 23 E Used multihead moulder Sold

Year: 1999

Grooves bed:Yes Shaft speed:6000 Feeding - kw:2 Table length:2000 Noise enclosure:Yes 4.top spindle kw:4 Planing hight mm:125 Planing widht mm:230 3.left spindle kw:4 Compressed air bar:6 1.bottom spindle kw:4 Fast exchange device:No Tool exchange places:No 2nd spindle on right kw:4 5th spindle at bottom kw:4 Pneumatical top pressure:Yes Adjustment electonic ally:Yes Diameter of the spindle mm:40 Feeding speed min-max m/min:10-36 Fully suspended drive feeding:Yes Electrical adjustment spindles:2 spindle Machine ready for demonstration:Yes Min.max. workpiece length in mm:350 WEINIG PROFIMAT 23E …

Price on request

Turkey

Weinig Profimat 23E Used multihead moulder Sold

Year:

working width 250mm working height 120mm 5 heads arrangement of heads lower / right / left / upper / universal adjustment of the heads in two axes spindle diameter 40mm spindle speed 6000 rpm smooth regulation of the feed speed top length 750mm soundproofing cabin electric adjustment of the pressure beam automatic table top lubrication system

Price on request

Poland

Weinig Profimat 23 E Used multihead moulder Sold

Year: 1999

Weinig Profimat 23 E. Special width at 260 mm and height at 160 mm. Engines of: 1st spindle 15 HP 2/3 spindle 15 Hp 4 spindles 15 Hp Forward speed variator 4 Hp 6 to 24 m-m. 380 v 50 Hz. Air mattress on work table. MACHINE REBUILT AND REVISED IN OUR WORKSHOPS IN ALBACETE. Option: + 1850 € Weinig measurement tool Weinig. OMA- SYSTEM No. 970-1435 Voltage 220 v single phase Rebuilt machine

Price on request

Spain

Weinig Profimat 23 Used multihead moulder Sold

Year:

Weinig Profimat 23 four-side planer working width 230mm working height 120mm 4 heads + aggregate for cutting a glazing bead control from the ATS panel adjustment of the heads in two axes electric adjustment of the pressure beam table top length 1200mm installed power 25kW smooth regulation of the feed speed

Price on request

Poland

4- molding weining profimat 23 Sold

Year: 2003

2003 machine 6 spindles 1 universal 11 kw 5 spindles 7.5 kW each

Price on request

Russia

Weinig Profimat 23E Planing machine Sold

Year: 1997

- Machining section 230 x 120 mm - Right and left router 7.5 KW - Planing 4 kw - Planer 4 kw - drive advance speed 5 to 24m / min - Pneumatic pressure - manual width and height adjustment by crank - Entry table length 2500mm - 4 Tool holders with CENTROLOCK irons - suction 1 x 150 + 4 x 120mm

Price on request

France

Used WEINIG PROFIMAT-23, 6-HEAD MOULDER Sold

Year: 1995

WEINIG WEINIG PROFIMAT-23, 6-HEAD MOULDER (1995), (460/60/3 electrics) Standard Specifications: - (3) moving/positioning heads - Includes EM-11 hydraulic feed hopper system We must disclose that there is a broken bracket/gearbox that the screws to move the top-head(s) and feed beam run-through (see pictures). This part will need to be addressed prior to putting it into service.

Price on request

USA

WEINIG PROFIMAT 23E Planing machine Sold

Year: 2000

4 trees Year of manufacture 2000 Cast iron, cast iron tables Digital positioning of the 2 axes (height / width) Left top "all width" Capacity: 220-120 Power Transmission Short wood system Pneumatic Pressure Manual WAXILIT pump for table lubrication Inverter (from 5 to 24 m / min) Engine 3kw (4Hp / 400v) Composition: Dégau. 7.5Hp / TD, TG. 15Hp / Planer 7.5Hp 4 Tool holders, shaft diam. 40mm (molding diam maxi tools: 180mm) 4 Tool holders with disposable plates (30 …

Price on request

France

Weinig Profimat 23E Used multihead moulder Sold

Year: 1996

Molding tool Weinig Mod Profimat 23 E 5 + u Year 1996 Power 35 Kw Voltage 380 Maximum working width 230 mm Maximum working height 160 mm Diameter of the axes 40 mm No. of total axes 6 units Lower horizontal axis 5.5 Kw Right tupi shaft 7.5 Kw Left tupi shaft Shared engine Top horizontal axis 7.5 Kw Universal shaft 4 Kw Variator 3 Kw No. of top drive 6 units Entry table length 1100 mm Pneumatic pressure Yes …

Price on request

Spain

Weinig Profimat 22 Used multihead moulder Sold

Year: 1994

WEINIG PROFIMAT 22 FOUR BOND STRUG planing width 220 mm planing height 150 mm smooth feed regulation travel of the left head and hydraulic pressure it adjusts itself to the planing width 3 aluminum heads included

Price on request

Poland

WEINIG PROFIMAT 23 Used multihead moulder Sold

Year:

width 230mm working height 120mm 5 heads ribbed top head arrangement: lower / left / right / upper / lower 40mm diameter spindles control heads in two axes controlling the left and the upper head of the panel, Spindle speed 6000 rpm variable speed control feed 380V power supply

Price on request

Poland

WEINIG Profimat 22 N Used multihead moulder Sold

Year:

- reconditioned - fully operational - ready to work - max workpiece width 22cm - max workpiece height of 12 cm - 5 spindles: 1) horizontal bottom 22cm, 4 kW 2) vertical right 14cm 3) vertical left 14cm (right and left 7.5 kW) 4) horizontal top 22cm, 5 5 kW 5) horizontal bottom 22cm, 4 kW - all heads adjustable up / down, right and left - the diameter of the spindle fi 40mm - pulling rollers gear from the …

Price on request

Poland

Weinig Profimat 23

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?

Working width	230 mm
Working height	120 mm
Nbr of shafts	5
Shafts diameter	40 mm
Sound proof cabin
Feeding table length	1970 mm
Feed speed	24 m/min
Engine power	5.5 kW
-------------------
Length x width x height	3400.0 × 1600.0 × 1600.0
Weight	3000 kg