ZPS MCFV 1680 NT

Year: 2003

Type: MCFV 1680 NT Parameters: 1680 mm, 1800x780 mm Manufacturer: ZPS Year of production / SO: 2003/2015 Location: Czech Republic Description: Heidenhain 426 control system, ISO 40 spindle, 12,000 rpm, 2x16 magazine (only one connected), central air cooling Repairs on the machine: 2015 ball screw replacement X-axis, 2014 ball screw replacement Y-axis, 2013 spindle replacement. Chip conveyor, tool probe. X axis Axis travel: 1680 mm Y axes Travel of axes: 810 mm Z axis Axis travel: 810 mm Table Outer …

Year: 2002

Type: MCFV 1680 NT Parameters: 1800x780 mm, 1680 mm Manufacturer: ZPS Year of production / SO / GO: 2002 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. X axis Axis travels: 1680 mm Y axis Axis travel: 810 mm Z axis Axis travels: 810 mm.

Year: 2003

Basic parameters 1800x780 Technical parameters: Spindle cone SK 50 Spindle speed 6000 rpm Transversal travel - x 1680 axis Longitudinal travel - axis from 810 Vertical travel - Y axis 810 Description The MCFV 1680 is in good technical condition. The machine has been serviced. Heidenhain TNC 426. The repair documentation is available for inspection. The machine is supplied without accessories. Available in 2019.

Year: 2000

Type: MCFV 1680 NT-C Parameters: 1680 mm, 1800x780 mm Manufacturer: ZPS Year of production: 2000 Location: Czech Republic Description: The machine is in a good technical condition, after agreement the possibility to test it under power. SK 40, center cooling, approx. 23000 hours. Machine parameters: Travel in X, Y, Z axes: 1650, 810, 810 mm Table clamping surface: 1800 x 780 mm Max. table load: 1750 kg. Max. spindle speed: 15000 rpm. Number of tool magazine bays: 20 Control system: …

Year: 2000

Type: MCFV 1680 NT Producer: ZPS Made in: 2000 Characteristic: Length of the working table: 1800 mm Width of the working table: 780 mm Maximum table load (evenly distributed): 1750 kg Power of the spindle drive: 20.5 kW Minimum rotary speed of the vertical spindle: 30 1/min Maximum rotary speed of the vertical spindle: 6000 1/min X-Axis travels: 1650 mm Y-Axis travels: 810 mm Z-Axis travels: 810 mm Taper: ISO 50 Maximum number of tools: 2x16 pcs Maximum tool length: …

Year: 2000

Type: MCFV 1680 NT Parameters: 1680 mm, 1800x780 mm Manufacturer: ZPS Year of production / SO / GO: 2000 / - / - Description: Travels: longitudinal 1650mm transverse: 810 mm vertical: 810 mm max. Table load 1750 kg work table clamping area 1800 x 780 mm working feed 0-20000 mm.min rapid traverse 20000 mm.min spindles conical cavity ISO 50 speed range 30- 6000 min. working feed 0-20000mm. min rapid traverse 20000mm.min distance of the face from the table surface 110-920mm …