Description
MAIN FUNCTIONS:
- Automatic loading and unloading of panels in stacks;
- Automatic evacuation of service panels upon loading; and
- Automatic handling of service panels/pallets at unloading;
- Ability to manually load/unload panels for special needs
(e.g., repassing, urgent pieces, etc.);
- Longitudinal and transverse squaring and/or squaringbanding;
- Execution of blind and/or through routing in longitudinal and/or transverse direction.
- Possibility of quality control with operator first panel of each batch after SQB 2;
The operator must enable on the SPV the quality control mode 1st part before the
machining of each batch:
Supervisor commands the entry of only one panel into SQB1 + SQB2 which will stop on the
exit belt conveyor to SQB2 for quality control by the operator.
If the panel is to be discarded, the operator presses appropriate "DISCARD" button and the
supervisor brings in a second test panel.
If the panel is good, the operator puts the panel back on the belt shifter and launches the
production with appropriate button.
Random quality control
It will be possible to activate this function by supervisor. Given a number of panels
that can be set, one will be drawn from the line for quality control, to enable
the extraction a gap between panels of about 10 to 12 seconds will be created.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase