Description
Engine: 7.5 kW
5 length of lumber input
Saw shortening
Output conveyor 4m + 2x ejectors + conveyor to the side for removal
The cutting saw KP 900 AUTOMAT is a suitable solution for the preparation of prisms and boards in the production of pallets and other wooden packaging products.
Basic functions of the device:
- Separate cut: Manual movement of the material using two buttons, or setting the length value on the dial of the control panel. Initiating the cut using the foot flap. Use for individual cuts.
- Manual mode: Setting one cut value for the entire length of the input material. Starting incisions with a foot flap. Automatic cutting of the entire material to one set value. Continuous adjustment of cutting faces according to the operator's request. Return to the preset value of the length of the input material. Use for making cubes. The advantage is a quick transition between individual values when the input material is frequently changed.
- Automatic mode: Setting the desired combination of values for the entire length of the input material to ensure a high yield. Continuous adjustment of cutting faces according to the operator's request. Return to the preset value of the length of the input material.
Number of lengths in the program 10 (possible selection of lengths from entered data for a given cut), number of programs 20 (10 programs for cutting lengths in a fixed order, 10 programs for optimizing the cut). Fast and simple rewriting of programs, high variability. Use for the production of blanks for a wide range of packaging products.
- Operation: The saw can be operated by one employee, the placement of the second one is limited by the weight and amount of material to be loaded, which the operator must manually place in the machine.
- Capacity of the cutting saw: The production capacity is determined by the cross-sectional dimensions of the processed material, its length and the manufactured assortments. Data on the maximum feed speed of the feeder up to 90 m/min can be used for the calculation. and the speed of one stroke of the cut is approximately 2 seconds. On average, we process 20-25 m3 of pallet blanks or 20-25 thousand per shift. pieces of cubes for the production of pallets.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase